sun, 16-oct-2011, 09:41
The deck, 2011-10-15

The deck, 2011-10-15

It's been forever since I've made a blog post, mostly because I've spent the last three months building a new deck on our house. We had a deck on the south and east sides of the house, but after building the arctic entryway last summer, the part of the deck on the east side had to be removed. For this project, I added a new deck in front of the arctic entryway that connects to the part of the old deck that's on the south side of the house, and replaced all of the old deck boards on that section of the deck. This was a lot of work. I don't have the exact number but I've driven more than 2,500 screws in the last three months, and removed at least a third of that many pulling up the old decking.

I finished the stairs and stair railings on the entry section of the deck yesterday just in time; this morning we had a quarter of an inch of snow on the ground.

The top photo shows what the deck looked like yesterday, the bottom photo shows what it looked like this morning.

I bought one new tool for this project, a Ridgid cordless drill. This was because the deck screws from the old part of the deck were Phillips head and I knew I wanted to use square drive screws for the new sections. I figured I would use my corded drill to drive the new screws, and the cordless drill to remove the old ones. It turned out that the old screws were both Phillips and square drive so I only needed one drill. I used the cordless. It was fantastic. One big improvement over the corded drill, that I didn't realize is that it has a much higher RPM, which means it's much faster to drive (or remove) screws. Add to that the lighter weight and that I didn't have to drag a cord around and it's now one of my favorite tools. The only thing that managed to bog it down was drilling half-inch holes through wet pressure-treated 4x4s.

The deck, 2011-10-16

The deck, 2011-10-16

tags: deck  summer  winter  snow  house  construction 
Meta Photolog Archives