OldTools Archive
Recent | Bios | FAQ |
184392 | "Cliff Rohrabacher, Esq." <rohrabacher@e...> | 2000‑11‑04 | Re: Swordmaking Class |
Nice deal~!! Did you start with iron ore? Did you melt and pour raw cast iron out and crack it into little chips to begin the laminating? Or did the class start with lengths of tool steel bar stock? I learned the "planing" operation as "shaving." Adriaan Gerber wrote: > Gentle Galoots, > > Short version: made and cracked a sword > > Long version: > > Last week I attended a class at the New England School of Metalwork. > It was an Introduction to Japanese Swordmaking and we each forged out > a complete sword and did the heat treatment. The class was given by > Don Fogg who is a great teacher. Don posted some pictures here: > > http://www.flickr.com/photos/dfogg/sets/72157608474758004/ > > That's me: > > http://www.flickr.com/photos/dfogg/2983498265/in/set- > 72157608474758004/ > > We started the class by forging a sen which is used as a hogging tool > to get rid of lots of steel, fast. After adjusting the bevel to a > steeper angle, mine started cutting nice curls, a revelation, you can > plane steel! The next day we forged the sword and the day after we > scraped and filed it flat. Then it was coated with clay, heated and > quenched in water. Unfortunately the first two blades cracked, I was > first. The rest of the blades survived after a small adjustment to the > quench time. I actually attempted a quench twice and both times lost > the tip of the blade, so now I have two small tip-shaped knives and a > funny-looking small sword :> > > Even with the cracks, the class was fantastic and I highly recommend > it=2E No affiliation, etc., etc.. > > Adriaan > > > "This is what you shall do: Love the earth and sun and the animals, > despise riches, give alms to every one that asks, stand up for the > stupid and crazy, devote your income and labor to others, hate > tyrants, argue not concerning God, have patience and indulgence toward > the people, take off your hat to nothing known or unknown or to any > man or number of men, go freely with powerful uneducated persons and > with the young and with the mothers of families, read these leaves in > the open air every season of every year of your life, re-examine all > you have been told at school or church or in any book, dismiss > whatever insults your own soul; and your very flesh shall be a great > poem and have the richest fluency not only in its words but in the > silent lines of its lips and face and between the lashes of your eyes > and in every motion and joint of your body." - Preface to Leaves of > Grass - Walt Whitman > > > > --------------------------------------------------------------- > > --------- > OldTools is a mailing list catering to the interests of hand tool > aficionados, both collectors and users, to discuss the history, usage, > value, location, availability, collectibility, and restoration of > traditional handtools, especially woodworking tools. > > To change your subscription options: > http://ruckus.law.cornell.edu/mailman/listinfo/oldtools > > To read the FAQ: http://swingleydev.com/archive/faq.html > > OldTools archive: http://swingleydev.com/archive/ > > OldTools@r... http://ruckus.law.cornell.edu/mailman/listinfo/oldtools > > ------------------------------------------------------------------------ |
|||
184385 | Adriaan Gerber <adriaang@y...> | 2008‑11‑04 | Swordmaking Class |
Gentle Galoots, Short version: made and cracked a sword Long version: Last week I attended a class at the New England School of Metalwork. It was an Introduction to Japanese Swordmaking and we each forged out a complete sword and did the heat treatment. The class was given by Don Fogg who is a great teacher. Don posted some pictures here: http://www.flickr.com/photos/dfogg/sets/72157608474758004/ That's me: http://www.flickr.com/photos/dfogg/2983498265/in/set-72157608474758004/ We started the class by forging a sen which is used as a hogging tool to get rid of lots of steel, fast. After adjusting the bevel to a steeper angle, mine started cutting nice curls, a revelation, you can plane steel! The next day we forged the sword and the day after we scraped and filed it flat. Then it was coated with clay, heated and quenched in water. Unfortunately the first two blades cracked, I was first. The rest of the blades survived after a small adjustment to the quench time. I actually attempted a quench twice and both times lost the tip of the blade, so now I have two small tip-shaped knives and a funny-looking small sword :> Even with the cracks, the class was fantastic and I highly recommend it. No affiliation, etc., etc.. Adriaan "This is what you shall do: Love the earth and sun and the animals, despise riches, give alms to every one that asks, stand up for the stupid and crazy, devote your income and labor to others, hate tyrants, argue not concerning God, have patience and indulgence toward the people, take off your hat to nothing known or unknown or to any man or number of men, go freely with powerful uneducated persons and with the young and with the mothers of families, read these leaves in the open air every season of every year of your life, re-examine all you have been told at school or church or in any book, dismiss whatever insults your own soul; and your very flesh shall be a great poem and have the richest fluency not only in its words but in the silent lines of its lips and face and between the lashes of your eyes and in every motion and joint of your body." - Preface to Leaves of Grass - Walt Whitman ------------------------------------------------------------------------ |
|||
184389 | scott grandstaff <scottg@s...> | 2008‑11‑04 | Re: Swordmaking Class |
>forging a sen which is used as a hogging tool to get rid of lots of >steel, fast. > <>you can plane steel! All right, hold it right there A! If these are any good, you can't just gloss past this in a sentence!! I want about 500 words on my monitor, pronto, Mister!! (and don't forget the pix) <> hee heee yours Schoolmarmy Scott ******************************* Scott Grandstaff Box 409 Happy Camp, Ca 96039 scottg@s... http://www.snowcrest.net/kitty/sgrandstaff/ http://www.snowcrest.net/kitty/hpages/index.html ------------------------------------------------------------------------ |
|||
184394 | "Kaye, Danny" <danny.kaye@n...> | 2008‑11‑04 | RE: Swordmaking Class |
all I can say is you suck, damn I want to take that class Danny Kaye Multimedia group 0115 848 2231 -----Original Message----- From: oldtools-bounces@r... on behalf of Adriaan Gerber Sent: Tue 04/11/2008 17:55 To: oldtools@r... Subject: [OldTools] Swordmaking Class Gentle Galoots, Short version: made and cracked a sword Long version: Last week I attended a class at the New England School of Metalwork. It was an Introduction to Japanese Swordmaking and we each forged out a complete sword and did the heat treatment. The class was given by Don Fogg who is a great teacher. Don posted some pictures here: http://www.flickr.com/photos/dfogg/sets/72157608474758004/ That's me: http://www.flickr.com/photos/dfogg/2983498265/in/set-72157608474758004/ We started the class by forging a sen which is used as a hogging tool to get rid of lots of steel, fast. After adjusting the bevel to a steeper angle, mine started cutting nice curls, a revelation, you can plane steel! The next day we forged the sword and the day after we scraped and filed it flat. Then it was coated with clay, heated and quenched in water. Unfortunately the first two blades cracked, I was first. The rest of the blades survived after a small adjustment to the quench time. I actually attempted a quench twice and both times lost the tip of the blade, so now I have two small tip-shaped knives and a funny-looking small sword :> Even with the cracks, the class was fantastic and I highly recommend it. No affiliation, etc., etc.. Adriaan "This is what you shall do: Love the earth and sun and the animals, despise riches, give alms to every one that asks, stand up for the stupid and crazy, devote your income and labor to others, hate tyrants, argue not concerning God, have patience and indulgence toward the people, take off your hat to nothing known or unknown or to any man or number of men, go freely with powerful uneducated persons and with the young and with the mothers of families, read these leaves in the open air every season of every year of your life, re-examine all you have been told at school or church or in any book, dismiss whatever insults your own soul; and your very flesh shall be a great poem and have the richest fluency not only in its words but in the silent lines of its lips and face and between the lashes of your eyes and in every motion and joint of your body." - Preface to Leaves of Grass - Walt Whitman -------------------------------------------------------------- ---------- |
|||
Recent | Bios | FAQ |