HI
On 2017-10-20 14:04, Kirk Eppler wrote:
> 1 - Make a new infill that is taller than the back of the body, and allow
> that to stop the wedge movement instead of the body. Sharpen the blade, or
> remove part of the underside of the Tee to get back to 0 projection. (Or
> cut the plane body back)
My picks:
New infill. A lower angle will reduce the clearance which could be a
problem. A new infill at an appropriate angle - 15 degrees - may also
allow you to retain a little more of the blade since the blade will hit
higher on the back of the mouth.
Work the back of the blade to shorten as required.
Brent
--
Brent Beach
Victoria, BC, Canada
|