Well the title of this month's lists was right on the mark, what with
the heat and humidity. It's been pretty brutal just hitting the fleas
much less working in this stuff. But I keep on, keeping on, as the old
saying goes. This is just a quick list of fresh arrivals , but I still
have lots from the previous lists so don't be shy.
PayPal is now accepted and preferred (if you use it) on all items.
It's easier for me to ship items through there, especially First Class
ones. Checks and money orders are still welcome.
And remember........da more ya buy, the cheaper they fly!
First contact (that is e-mail, or phone) that says I want it gets it.
Oldtools terms, except on items and orders over $100, if I don't know ya
or haven't done business in the past (and my records good way back..)
then it's pre-pay. Prices do not include shipping. All items are
shipped with Delivery Confirmation. Insurance, unless it is a big order
or a very fragile item is optional. Just let me know. Also, I am
shipping a lot more stuff via First Class mail. There will be a small
amount added to the shipping cover the cost of the padded mailer. I
don't get them for free.
Please put your name and address in the message. Saves time and email
traffic!
---------------------------------------------------
Small Hand Forged Tap Holder Or Twister Bar. Measuring 7 5/16" long,
the holes are 1/8", 3/16", and 5/32" square, and this weighs 2 1/2 oz
unboxed. Not signed as to the maker. This is in decent condition and
was cleaned. There are some scuff marks left over from when this was
made. The holes are all good to go. This is a nicely made tool to say
the least. $15.00
http://oldetoolshop.com/forsale/july/hftapholder0701a.jpg
http://oldetoolshop.com/forsale/july/hftapholder0701b.jpg
L S Starrett No 440 Micrometer Depth Gage. This weighs 4 1/2 oz
unboxed. This is in used but reasonably good condition and was lightly
cleaned. There is a little frosting on the sides of the had but the
face is good. The adjuster travels smoothly and the locking collar
works. The rod is also good and the end cap unscrews. This ain't minty
fresh but it will get the job done. $26.00
http://oldetoolshop.com/forsale/july/machinisttool0716a.jpg
http://oldetoolshop.com/forsale/july/machinisttool0716b.jpg
http://oldetoolshop.com/forsale/july/machinisttool0716c.jpg
Pair L S Starrett Large Caliper Legs For The No 59 Trammel Points. They
weigh 5 1/2 oz unboxed. These are in reasonably good condition and were
cleaned. There is a little frosting on the shafts but nothing too bad
there. The tips are good and the fine adjuster screw works. These are
handy items to have around and they do not show up very often. $22.00
http://oldetoolshop.com/forsale/july/machinisttool0717a.jpg
http://oldetoolshop.com/forsale/july/machinisttool0717b.jpg
http://oldetoolshop.com/forsale/july/machinisttool0717c.jpg
Wm Johnson Newark NJ No 4 Rivet Set or Setter. Measuring 4 5/8" long,
the post hole is 1/8" in diameter, the dimple is 1/4", and this weighs 6
1/2 oz unboxed. This is in reasonably good condition and was cleaned.
The head and holes are good. Somebody painted the handle blue and that
is worn a bit. The striking end is good. This is a quality and handy
tool for a number of trades. $17.99
http://oldetoolshop.com/forsale/july/rivetset0701a.jpg
http://oldetoolshop.com/forsale/july/rivetset0701b.jpg
Vintage Tinsmith 7/16 Inch Tin Seamer. Measuring 5 5/16" overall, the
face is 2" long, the groove is 7/16" wide, and this weighs 1 lb 1 1/4 oz
unboxed. Not signed as to the maker. This is in decent condition and
was cleaned. There is some light patina on the body but the face and
groove are good. The striking end had some mushrooming removed at some
point and that is good to go. This ain't perfect but these guys sure
ain't been showing up much of late around these here parts. $23.00
http://oldetoolshop.com/forsale/july/tintool0702a.jpg
http://oldetoolshop.com/forsale/july/tintool0702b.jpg
http://oldetoolshop.com/forsale/july/tintool0702c.jpg
Early Hand Forged Tinsmith 1/2 Inch Tin Seamer. Measuring 5 3/8"
overall, the face is 1 15/16" long, the groove is 1/2" wide, and this
weighs 1 lb 6 1/4 oz unboxed. Not signed as to the maker, there are
some user initials stamped on the head and handle. This is in decent
condition and was cleaned. There is some patina on the body. The head
looks like it was dressed at some point and there is light scuff on the
inside of the groove. The striking end also had some mushrooming
removed but that is good otherwise. This ain't pretty or perfect but
considering the age of the tool, well it sure ain't bad. $22.00
http://oldetoolshop.com/forsale/july/tintool0703a.jpg
http://oldetoolshop.com/forsale/july/tintool0703b.jpg
http://oldetoolshop.com/forsale/july/tintool0703c.jpg
T H Witherby 1 Inch Wheelwrights Corner Chisel. Measuring 10 5/16" from
the edge to the end of the socket, the blade is 6 11/16" long, this is
14 1/8" overall, and this weighs 1 lb 2 3/4 oz unboxed. This is in
reasonably good condition and was cleaned by someone else. There is a
little pitting on the backs up by the edges but they are good for the
most part. The edges are good. The socket has some dings and pitting.
The handle is a replacement. That ain't perfect but it's solid. I did
not have that off of the tool. This ain't the prettiest but the
Witherby reputation for quality tools has stood the test of time. $40.00
http://oldetoolshop.com/forsale/july/chisel0703a.jpg
http://oldetoolshop.com/forsale/july/chisel0703b.jpg
Small Hand Forged Blacksmith Anvil Cutting Hardy. Measuring 3 1/2"
overall, the edge is 1 5/16" across, the shaft is 3/8" by 3/16" at the
end, 11/16" square at the start of the head, and this weighs 7 1/4 oz
unboxed. Not signed as to the maker. This is in decent condition and
was cleaned. There is the usual patina found on these guys. I did
dress the edge a little and that is good to go, well unless you want to
shave yer hoo-haw with this. I also cleaned a little mushrooming off of
the end of the shaft and that is good to go. This ain't the fanciest
but it will get the job done. $17.00
http://oldetoolshop.com/forsale/july/blacksmith0704a.jpg
http://oldetoolshop.com/forsale/july/blacksmith0704b.jpg
Weber Germany Drafting Tool Compass. Measuring 5 7/16" overall and this
weighs 1 1/2 oz unboxed. This is in reasonably good condition and was
cleaned. Made of German Silver. The joint is good and holds position
as does the leg joints. The screws for the point and the lead holder
both work. This is a neat tool to say the least. $17.00
http://oldetoolshop.com/forsale/july/draftingtool0703a.jpg
http://oldetoolshop.com/forsale/july/draftingtool0703b.jpg
http://oldetoolshop.com/forsale/july/draftingtool0703c.jpg
Old Hand Forged Belt Axe Head. Measuring 5 3/8" long (across the
center), the edge is 3 3/4" high (straight across), and this weighs 1 lb
5 1/4 oz unboxed. Not signed as to the maker, there is a 6 stamped on
the one side of the blade. This is in decent condition and was
cleaned. There is some overall light patina. The edge is good and was
sharpened recently. Somebody else cleaned some mushrooming off of the
poll and did they got a little aggressive on the back. The eye has some
dings on the inside edge at the top but it's good with no cracks. This
ain't pristine but considering the age of the tool, it ain't too bad.
$32.00
http://oldetoolshop.com/forsale/july/axe0702a.jpg
http://oldetoolshop.com/forsale/july/axe0702b.jpg
http://oldetoolshop.com/forsale/july/axe0702c.jpg
Blacksmith Forged 1 3/4 Lb Cross Peen Hammer Head. Measuring 4 5/16"
long, the face is 1 3/8" in diameter, the peen is 1 7/16" wide, and this
weighs 1 lb 12 1/2 oz unboxed. Not signed as to the maker, there are
initials lightly pin punched on the sides. This is in decent condition
and was cleaned. There is some overall light patina on the head. The
face has some light dings and there are some small chips off around the
edge along with a little mushrooming. The peen has some wear and also a
little mushrooming on the underside. The punched eye has some dings
around the inside on the top and some scuffs on both the top and
underside. This ain't the prettiest but then neither are you and it
will get the job done. $18.00
http://oldetoolshop.com/forsale/july/hammer0709a.jpg
http://oldetoolshop.com/forsale/july/hammer0709b.jpg
http://oldetoolshop.com/forsale/july/hammer0709c.jpg
http://oldetoolshop.com/forsale/july/hammer0709d.jpg
Vintage No 61 2 Ft Carpenters Folding Rule. This weighs 1 3/4 oz
unboxed. Not signed as to the maker, but based on the parallel
horizontal rulings this is either a Stephens or a Chapin-Stephens
product. This is in reasonably good condition and was lightly cleaned.
The outside has most of the original finish and there are some spots of
some kind of residue there. There is some staining on the one side
where the hinge arms go through the wood. The inside finish is also
original and good. The brass has some light patina. The joints are
good and all three locator pins are present. This ain't minty perfect
but considering the age, well it sure ain't bad. $17.00
http://oldetoolshop.com/forsale/july/rule0703a.jpg
http://oldetoolshop.com/forsale/july/rule0703b.jpg
http://oldetoolshop.com/forsale/july/rule0703c.jpg
Vintage Small Jeweler Watchmaker Cross Peen Hammer. Measuring 9 1/8"
overall, the head is 2 3/4" long, the face is 7/16" in diameter, the
peen is 3/8" wide, and this weighs 2 1/2 oz unboxed. Marked as show and
was made in France. This is in reasonably good condition and was
cleaned. There are some dings and staining on the head but nothing too
bad. The face has some very light dings and I did run a file over a
little mushrooming around the edge. The peen is good and I also took a
little mushrooming off the underside. The handle is old but I can't say
if it's the original one. That has the usual stains and dings but it's
solid and the head is on tight. This ain't perfect but it is a quality
tool. $22.00
http://oldetoolshop.com/forsale/july/hammer0708a.jpg
http://oldetoolshop.com/forsale/july/hammer0708b.jpg
http://oldetoolshop.com/forsale/july/hammer0708c.jpg
Solid Brass 10 oz Plumb Bob. Measuring 5" long, 13/16" in diameter, and
this weighs 10 3/4 oz unboxed. Not signed as to the maker. This is in
reasonably good condition and was cleaned by someone else. There are a
few light dings on the body but nothing too bad. The steel tip is
dulled. The string cap is good and does remove. This is a good looking
tool to say the least. $22.00
http://oldetoolshop.com/forsale/july/plumbbob0701a.jpg
http://oldetoolshop.com/forsale/july/plumbbob0701b.jpg
Blacksmith 3 1/4 Lb Cross Peen Hammer Head Workng Old Anvil Tool READ
Brophy L I City Hand Forged Oyster Clam Shucking Knife. Measuring 9
11/16" long, the blade is 13/16" wide, the handle is 3/4" square, and
this weighs 15 1/2 oz unboxed. This is in reasonably good condition for
the age and use and was cleaned. There are some scuffs and stains on
the blade but the edges are good. The handle has some patina including
some dings on the end but nothing worth kicking the cat over. I have
sold a bunch of these over the years but this is the first one by this
maker that I can recall seeing. $24.00
http://oldetoolshop.com/forsale/july/hfclamknife0701a.jpg
http://oldetoolshop.com/forsale/july/hfclamknife0701b.jpg
Union Tool Co 12 Inch Carpenters Combination Square. This weighs 10 oz
unboxed. This is ruled in 16ths and 32nds on the front, and 16ths and
8ths on the back. This is in decent condition and was cleaned by
someone else. The rule has some areas of light pitting but all the
rulings are readable and the edges and corners are good. The head was
also refinished. The machined surfaces are good as is the level vial
and these even has the scribe. The locking screw does it's job. This
ain't the prettiest but it will get the job done. $22.00
http://oldetoolshop.com/forsale/july/square0702a.jpg
http://oldetoolshop.com/forsale/july/square0702b.jpg
http://oldetoolshop.com/forsale/july/square0702c.jpg
http://oldetoolshop.com/forsale/july/square0702d.jpg
Unusual Hand Forged Blacksmith Curved Or Bent Edged Head. Measuring 3
5/8" long, the edge is 1 1/16", and this weighs 1 lb 3 1/2 oz unboxed.
Not signed as to the maker. I'm sure that this has some kinda of fancy
name but I can't recall what it is. This is in decent condition and was
cleaned. There is a little patina but nothing too bad. The edge is
good. The striking end has some wear to the one side and some
mushrooming there as well. The punched eye is good to go. I gotta say,
that this is one of these tools that does now show up very often, at
least around these here parts. $22.00
http://oldetoolshop.com/forsale/july/blacksmith0701a.jpg
http://oldetoolshop.com/forsale/july/blacksmith0701b.jpg
http://oldetoolshop.com/forsale/july/blacksmith0701c.jpg
http://oldetoolshop.com/forsale/july/blacksmith0701d.jpg
Blacksmith Hand Forged 5/8 Inch Top Swage Head. Measuring 3 7/8" long,
the face is 2 3/16" wide, the groove is 5/8" wide at the one end, a
little wider at the other end, and this weighs 1 lb 11 1/2 oz unboxed.
There is a maker's mark but it's too faint to read. This is in decent
condition and was cleaned. There is some overall pitting and patina.
The face has some light pitting and wear to the one side of the groove.
The striking end has some mushrooming and I did zing down some sharp
spots. The punched eye is good other than a little crusty. This ain't
pristine but it will ge the job done. $23.00
http://oldetoolshop.com/forsale/july/blacksmith0702a.jpg
http://oldetoolshop.com/forsale/july/blacksmith0702b.jpg
http://oldetoolshop.com/forsale/july/blacksmith0702c.jpg
http://oldetoolshop.com/forsale/july/blacksmith0702d.jpg
Neat 6 Oz Ball Peen Hammer. Measuring 10" overall, the head is 3 3/8"
long, the face is 5/8" in diameter, the peen is 9/16" in diameter, and
this weighs 6 oz total unboxed. Not signed as to the maker, this is
just marked as shown. This is in reasonably condition and was lightly
cleaned. There ain't nothing at all to fuss about with the head, save
for a few very tiny dings on the peen. The handle is good other than a
few dings. The head wiggles a little but it ain't gonna come off. This
is a neat small hammer to say the least. $17.00
http://oldetoolshop.com/forsale/july/hammer0704a.jpg
http://oldetoolshop.com/forsale/july/hammer0704b.jpg
http://oldetoolshop.com/forsale/july/hammer0704c.jpg
GFC Germany Piercing Fret Saw Tool. Measuring 11 5/16" overall as
pictured, the throat is 2 5/16" deep, this will take blades up to 6 1/2"
overall in length, and this weighs 5 1/4 oz unboxed. This is in
reasonably good condition and was lightly cleaned. There are a few
stained spots on the frame but nothing worth kicking the cat over. The
screws all work and the frame moves freely. The blade is an NOS
replacement from my stash here. The handle is good other than a few
dings to the finish. This ain't minty but it sure ain't bad and it will
get the job done. $17.00
http://oldetoolshop.com/forsale/july/saw0702a.jpg
http://oldetoolshop.com/forsale/july/saw0702b.jpg
http://oldetoolshop.com/forsale/july/saw0702c.jpg
---------------------------------------------
“I worry that the person who thought up Muzak may be thinking up
something else.”
Lily Tomlin
Tony
Olde River Hard Goods
http://www.oldetoolshop.com
TSMusic on Facebook
http://www.facebook.com/tonyseomusic
|
