OldTools Archive
Recent | Bios | FAQ |
262294 | paul womack <pwomack@p...> | 2017‑05‑18 | Re: I seek wisdom re toothing plane blades |
Tony Blanks wrote: > Since the "depth of cut" when used to scratch the surface of a piece with such a plane is effectively the depth of the vee between the teeth, it seems to me to make sense to grind these blades with a steeper bevel to better support the teeth. But the effective depth of the vee is a combination of the perpendicular depth of the vee, AND THE BEVEL ANGLE. It is obvious that grinding at 90 degrees would give no teeth at all, the rest follows by extrapolation. BugBear |
|||
Recent | Bios | FAQ |