Sent from my iPad
> On Nov 28, 2016, at 7:55 PM, John M Johnston (jmjhnstn) wrote:
>
> Bill, I'm using this mid-19th century shaving box as a jumping off point for
my late 18th century shaving box. You can see that the dividers are quite thin,
and every intersection is a V groove. Looking at the joints in this box, I
would say the grooves are cut by a chisel, and the mating ends of the dividers
by a chisel or knife. Neither are perfect.
>
> http://galootcentral.com/component/option,com_copperminevis/Itemid,2/
place,displayimage/album,682/pos,3/">http://galootcentral.com/component/option,c
om_copperminevis/Itemid,2/place,displayimage/album,682/pos,3/
It is clear that not all joints will be perfect! It looks like the dividers in
your example are even skinnier than what I am attempting. I find it amazing that
people worked to such tolerances with only hand tools. I use the b**ds*w to get
me started. OTOH, we do have more trouble sourcing good wood these days. The
Mahogany I am using has been sitting in my shop for about three years. Before
that, it sat in a local barn for about 25 years. The slab is quite flat and
square. Still, two of the slices took a decided curve as they came off the saw.
Bill
|