Gracious Galoots,
I finished the carving hatchet today. I reground the edge to a radius of
about 7" and created an asymmetric set of bevels. The long side, about
1/2" wide, is toward the work. The included angle is about 30 degrees. I
used a billet of oak to hack out a handle (drawknife, carving knife,
spokeshaves, rasps). I wouldn't do that again, as it was reluctant to
change shape. Pictures are here, last few in the album:
http://bit.ly/1MW4U7g
Needs honing and the included angle may be too acute, but I was chopping
oak. Green wood will be friendlier.
Regards,
Dwight
|