OldTools Archive

Recent Bios FAQ

256624 "T.J. Mahaffey" <tj@t...> 2015‑10‑12 Re: Tool Cabinet Finally Finished
Thanks, everyone, for your compliments.

Ed, the outside dimensions are:

49-1/2" wide
36" tall
11" deep

The room inside the doors is 1-3/4” usable, which takes the 1/2” plywood panel
into account.

Also, here is a closed shot:

http://www.tjm
ahaffey.com/workshop/img/tmp/IMG_3061.jpg

I must say that one of the best features of my cabinet as it sits today was the
addition of the simple walnut shelf that sits above the drawers. It's not
attached, so I can pull it out and rework it, if I want to. The three tiers of
open surface have been more useful than the 8 small cubbies I had before. The
open surface doesn't pose a dust problem as long as I close the doors. :P

---
T.J. Mahaffey
tj@t...



> On Oct 10, 2015, at 3:46 PM, Ed Minch  wrote:
> 
> TJ
> 
> What are the outside dimensions of the basic box?  And the depth of the box
and of the doors?  I was intrigued that the Studley box had stuff hung on both
sides of some of the of the swinging panels
> Ed Minch
> 
> 
> 
> 
> On Oct 10, 2015, at 11:36 AM, T.J. Mahaffey  wrote:
> 
>> Thanks for looking.
>> 
>> 
>> http://www.
tjmahaffey.com/workshop/img/tmp/IMG_3084.jpg
>> 
>> http://www.
tjmahaffey.com/workshop/img/tmp/IMG_3087.jpg
>> 
>> http://www.
tjmahaffey.com/workshop/img/tmp/IMG_3089.jpg
>> 
>> http://www.
tjmahaffey.com/workshop/img/tmp/IMG_3088.jpg
>> 
>

Recent Bios FAQ