On Jan 24, 2009, at 11:31 AM, Dwight Beebe wrote:
~~~~~~~~~~~~~~~~~~~~~~~~Ka-chunk~~~~~~~~~~~~~~~~~~~~~~~~
Do the assembled porch
members have any suggestions about reattaching the shaft and screw? I
have a propane torch, but little experience with it, although I've
done more than my share of electric soldering.
With respect to the chipped horn, I've uploaded photos of the saw,
post-Evaporust, and included probably too many pics of the damaged
area.
~~~~~~~~~~~~~~~~~~~~~~~~De-chunk~~~~~~~~~~~~~~~~~~~~~~~~
If it was me, I would silver solder the screw back together.
For the chip in the horn, I would mix up some epoxy with wood dust
and patch it with that. Use some tape as a dam to keep the epoxy in
place, maybe do several applications.
Spike Cornelius
PDX
Crazy for Shavings
------------------------------------------------------------------------
|