Second run of goodies for the month of May. Got a number of fresh items
for your perusal, both collectible and usable.
PayPal is preferred (if you use it) on all items. It's easier for me to
ship items off of a paid PayPal invoice, especially First Class ones.
Checks and money orders are still welcome.
And remember........da more ya buy, the cheaper they fly!
First contact (that is e-mail, or phone) that says I want it gets it.
Prices do not include shipping. All items are shipped with Delivery
Confirmation. Insurance, unless it is a big order or a very fragile item
is optional. Just let me know. Also, I am shipping a lot more stuff via
First Class mail. There will be a small amount added to the shipping
cover the cost of the padded mailer. I don't get them for free.
Please put your name and address in the message. Saves time and email
traffic!
---------------------------------------------------
C S Osborne No 0150 1 3/4 Inch English Point Strap End Punch. Measuring
6 1/4" long and this weighs 9 1/2 oz unboxed. This is in decent
condition and was cleaned. The head has some staining and frosting, but
nothing too bad. I did touch up the edge a little, but that could stand
some work. The finish on the body and handle is worn. The striking end
is good. This ain't minty, but it's 1/2 the price of what a new one
will set you back. Just saying. $45.00
http://oldetoolshop.com/forsale/may/leathertool0503a.jpg
http://oldetoolshop.com/forsale/may/leathertool0503b.jpg
http://oldetoolshop.com/forsale/may/leathertool0503c.jpg
http://oldetoolshop.com/forsale/may/leathertool0503d.jpg
C S Osborne No 151 3/4 Inch Oval Punch . Measuring 4 3/4" long, the
head is 3/4" by 1/8", and this weighs 4 1/2 oz unboxed. This is in
decent condition and was cleaned. There is a little light patina on the
head, but nothing too bad. The edge will need a little work. The
handle finish has some wear and the striking end is good. This ain't
pristine, but these guys sure do not show up very often either. $30.00
http://oldetoolshop.com/forsale/may/leathertool0504a.jpg
http://oldetoolshop.com/forsale/may/leathertool0504b.jpg
http://oldetoolshop.com/forsale/may/leathertool0504c.jpg
Millers Falls No 4 T-Auger Handle. Measuring 15 3/16" long and this
weighs 3 lbs 1/2 oz unboxed. This isn't signed, but few of these were.
This is in reasonably good condition and was cleaned. There is some
wear to the original finish on the head, but most if it is present. The
jaws are good and have the spring. The chuck shell is also good with no
cracks that I can see. The ratchet works in both directions and the
locked position. The handles have some light dings and stains, but
nothing too bad. The spinning section on the removable one is good with
no cracks. That doesn't thread all the way into the top of the chuck,
but it goes in far enough. This ain't minty, but these guys sure have
been hard to come by of late. $60.00
http://oldetoolshop.com/forsale/may/augerhandle0501a.jpg
http://oldetoolshop.com/forsale/may/augerhandle0501b.jpg
http://oldetoolshop.com/forsale/may/augerhandle0501c.jpg
http://oldetoolshop.com/forsale/may/augerhandle0501d.jpg
http://oldetoolshop.com/forsale/may/augerhandle0501e.jpg
Early Hand Forged Tinsmith Round Groove Tin Seamer. Measuring 5 3/4"
long, the head is 1 1/8" wide, the groove is 5/32" across, and this
weighs 11 oz unboxed. There are 2 different stamped marks on the
handle, they might be user or maker marks. There also is a lightly pin
punched initial on the one side of the head. This is in reasonably good
condition and was cleaned. There ain't much in the way of patina to fuss
about. The head is good overall, the one edge was dressed at some
point. The striking end has a little mushrooming and I did run a file
over some sharper spots. This is another one of those tools that are
getting few and far between anymore. $25.00
http://oldetoolshop.com/forsale/may/tintool0501a.jpg
http://oldetoolshop.com/forsale/may/tintool0501b.jpg
http://oldetoolshop.com/forsale/may/tintool0501c.jpg
Woodings Verona Blacksmith 1/2 Inch Drift Punch Head. Measuring 9 5/8"
long, the tip is 1/2" in diameter, and this weighs 3 lbs 9 1/2 oz
unboxed. This has the mark of the Woodings Verona Tool Works, who made
tools for the mining and railroad industries. This is in decent
condition and was cleaned. There is some overall light patina. The tip
was dressed at some point (this is marked 5/8) and is fairly good. The
striking end has some dings, chips around the edge, and a bit of
mushrooming, but nothing too bad. The eye is good to go. This ain't
minty, but it is a quality tool that will the job done. $24.00
http://oldetoolshop.com/forsale/may/blacksmith0503a.jpg
http://oldetoolshop.com/forsale/may/blacksmith0503b.jpg
http://oldetoolshop.com/forsale/may/blacksmith0503c.jpg
Hand Forged Flat Jaw 19 Inch Blacksmith Tongs. Measuring 19/1/2" long,
the jaws are 1 7/8" deep, 7/8" wide at the tips, and this weighs 2 lbs
11 1/4 oz unboxed. Not signed as to the maker. This is in reasonably
good condition and was cleaned. There is a little patina, but nothing
too bad. The jaws are good and are lightly grooved down the center.
The joint has a little wiggle and the rivet is solid. This is a solid
tool that will get the job done. $22.00
http://oldetoolshop.com/forsale/may/blacksmith0504a.jpg
http://oldetoolshop.com/forsale/may/blacksmith0504b.jpg
http://oldetoolshop.com/forsale/may/blacksmith0504c.jpg
Stanley 3 lb Cross Peen Hammer. Measuring 10 13/16" overall, the head
is 5 1/8" long, the face is 1 3/8" in diameter, the peen is 1 5/8" wide,
and this weighs 3 lbs 4 1/4 oz total unboxed. This is in decent
condition and was cleaned. There is some overall pitting. The face has
some light pitting, but no serious problems. The peen is fairly good
save for some wear on the corners. The handle is a recent replacement.
That is good and the head is on tight. This ain't pretty or perfect,
but it will get the job done. $18.00
http://oldetoolshop.com/forsale/may/hammer0506a.jpg
http://oldetoolshop.com/forsale/may/hammer0506b.jpg
http://oldetoolshop.com/forsale/may/hammer0506c.jpg
http://oldetoolshop.com/forsale/may/hammer0506d.jpg
Vintage Atlas Tool 10 Inch Vernier Caliper. Measuring 11 3/8" overall
and this weighs 7 1/4 oz unboxed. This is ruled in 16ths of an inch.
This is in reasonably good condition and was cleaned. There is some
light frosting and a few stains, but nothing too bad. The faces on the
jaws are good inside and out. This is only ruled on the front and those
are all readable. The locking screw works. This ain't the fanciest
tool of it's kind, but it is an older one that will get the job done.
$18.00
http://oldetoolshop.com/forsale/may/machinisttool0511a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0511b.jpg
http://oldetoolshop.com/forsale/may/machinisttool0511c.jpg
http://oldetoolshop.com/forsale/may/machinisttool0511d.jpg
Uncommon 15 Gauge Wad Punch. Measuring 2 7/8" long, the head is a hair
over 5/8" in diameter, and this weighs 1 3/4 oz unboxed. Not signed as
to the maker. This is in reasonably good condition and was cleaned.
There is a little overall light patina. The edge is fairly good. The
striking end was dressed at some point and that is good as well. I
gotta say, that this size does not show up very often. $18.00
http://oldetoolshop.com/forsale/may/punch0502a.jpg
http://oldetoolshop.com/forsale/may/punch0502b.jpg
http://oldetoolshop.com/forsale/may/punch0502c.jpg
Early Hand Forged Coopers Adze Head. Measuring 9 3/4" long (straight
across), the edge is 2 3/16" wide, the face is 1 1/8" high, 1 1/4" wide,
and this weighs 2 lbs 2 3/4 oz unboxed. Not signed as to the maker.
This is in decent condition and was cleaned. There is some overall
pitting and patina. The steel bit is 3" deep up the center. That is
fairly good save for some light pitting and frosting and a dot of
something. The edge is beveled on both sides. The face has some chips
at the top and the start of some mushrooming there as well. The eye has
a little crusty on the inside, but it's solid with no cracks that I can
see. This ain't minty, but these older ones rarely are. $35.00
http://oldetoolshop.com/forsale/may/earlycooperstool0501a.jpg
http://oldetoolshop.com/forsale/may/earlycooperstool0501b.jpg
http://oldetoolshop.com/forsale/may/earlycooperstool0501c.jpg
http://oldetoolshop.com/forsale/may/earlycooperstool0501d.jpg
Stanley No 101 Model Makers Block Plane. This weighs 4 1/4 oz unboxed.
This is in decent condition and was cleaned. The sides have most of the
japanning, but there are some paint marks that refused to come off. The
sole has a few small light spots of pitting and a dot in front of the
mouth that looks like a casting flaw. The japanning on the body is
fairly good save for a few dots of paint. The cap has a little funky on
the finish. The blade is clean on the front and there is plenty to work
with. The blade will need a sharpening. This ain't pristine, but it
will get the job done. $25.00
http://oldetoolshop.com/forsale/may/stanley1010501a.jpg
http://oldetoolshop.com/forsale/may/stanley1010501b.jpg
http://oldetoolshop.com/forsale/may/stanley1010501c.jpg
http://oldetoolshop.com/forsale/may/stanley1010501d.jpg
Darling Brown & Sharpe Ames Patent Center Finding Square. Measuring 8"
long (overall), the rule is 6", and this weighs 6 1/4 oz unboxed.
Nathan Ames of Boston, MA was granted Pat. No. 9,089 on July 6, 1852 for
the design of this tool. This one just is marked D. B. & S. who were in
business under this name from 1866 until 1892. This is in very good
condition and was lightly cleaned. The head has some light scratches
and one small casting flaw. The rule is clean save for a very light
frosted spot and a user name on the back. All the edges and corners are
crispy good. I did not mess with screws. These guys sure don't show up
very often and a D B & S marked one in this kind of shape is a real
find. $75.00
http://oldetoolshop.com/forsale/may/machinisttool0503a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0503b.jpg
http://oldetoolshop.com/forsale/may/machinisttool0503c.jpg
http://oldetoolshop.com/forsale/may/machinisttool0503d.jpg
Vintage Bausch & Lomb Opticians Pliers. Measuring 5" long and this
weighs 3 oz unboxed. Made in the U.S.A. This is in reasonably good
condition and was cleaned. There is some light frosting on the head.
The jaws and tips are good. The through the center style joint is also
good with no play. The handles have some staining and light patina.
This ain't perfect, but it sure ain't a very common tool to say the
least. $20.00
http://oldetoolshop.com/forsale/may/pliers0501a.jpg
http://oldetoolshop.com/forsale/may/pliers0501b.jpg
http://oldetoolshop.com/forsale/may/pliers0501c.jpg
Pexto No 32-5 Jewelers Pliers. Measuring 5 1/16" long and this weighs 3
oz unboxed. This is in good condition and was not cleaned, at lesat by
me. There is a little overall frosting, but nothing too bad. The jaws
have a little wear, but close down tight. The joint and handle are
good. I gotta say, that it's been more than a few years since I last
had one of these guys. $22.00
http://oldetoolshop.com/forsale/may/pliers0502a.jpg
http://oldetoolshop.com/forsale/may/pliers0502b.jpg
http://oldetoolshop.com/forsale/may/pliers0502c.jpg
L S Starrett Center Head For A 6 Inch Combination Square. Measuring 2
9/16" across the tips and this weighs 2 1/2 oz unboxed. This isn't
signed, but few of these are. This is in very good condition and was
not cleaned. There is a little staining on the nut and sides, but
nothing too bad. The inside is clean save for the factory machining
marks. The finish is original and is good other than a few light
dings. The locking screw and tab are good. These guys sure do not show
up very often, especially in this kinda shape. $30.00
http://oldetoolshop.com/forsale/may/machinisttool0507a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0507b.jpg
http://oldetoolshop.com/forsale/may/machinisttool0507c.jpg
Millers Falls No 732 10 Inch Leland Patent Holdall Brace. This weighs 3
lbs 1 oz unboxed. John A. Leland of Millers Falls, MA was granted Pat.
No. 857,947 on June 25, 1907, Pat. No. 912,582 on Feb. 16, 1909, Pat.
No. 974,896 on Nov. 8, 1910 for the design of the chuck and jaws used on
this tool. This can be used with both square tang and round shaft
bits. This is in reasonably good condition and was cleaned. The
plating on the arms has a few small spots where it is worn and there is
a little light patina, but nothing too bad. The chuck and jaws are
good. The ratchet works in both directions and the locked position.
The grip and pad have some wear to the finish and a few dings, but both
spin freely. This ain't pristine, but it is a quality tool that will
get the job done. $40.00
http://oldetoolshop.com/forsale/may/brace0501a.JPG
http://oldetoolshop.com/forsale/may/brace0501b.JPG
http://oldetoolshop.com/forsale/may/brace0501c.JPG
http://oldetoolshop.com/forsale/may/brace0501d.JPG
Vintage Hand Forged Slater Slate Splitting Chisel. Measuring 10 7/16"
long, the edge is 1 13/16" wide, and this weighs 9 1/4 oz unboxed. Not
signed as to the maker. This is in decent condition and was cleaned.
There is some pitting and rust etching on both sides. The edge is
good. The striking button has some light dings, but no cracks that I
can see. This ain't minty, but it will get the job done. $18.00
http://oldetoolshop.com/forsale/may/slatetool0502a.jpg
http://oldetoolshop.com/forsale/may/slatetool0502a.jpg
http://oldetoolshop.com/forsale/may/slatetool0502a.jpg
Stanley No 12 Lignum Vitae Jointers Mallet. Measuring 12 1/8" overall,
the head is 6 1/8" long across the top, the faces are 3 3/8" high
(across the centers), 2 3/8" wide, and this weighs 2 lbs 9 1/4 oz
unboxed. This is only marked with a 12 on the top of the head which is
the only markings that Stanley put on these guys. This is in decent
condition and was cleaned. There are a couple of tiny bits of paint
that didn't want to come off of the head and a few bits of the wax that
I use as well. Both faces have some chipping, but the insides are
fairly good save for some light dings. The oak handle is original to
the tool. That has some dings and stains, but it's solid. This ain't
pristine, but these guys sure are getting few and far between of late.
$65.00
http://oldetoolshop.com/forsale/may/woodenmallet0501a.jpg
http://oldetoolshop.com/forsale/may/woodenmallet0501b.jpg
http://oldetoolshop.com/forsale/may/woodenmallet0501c.jpg
http://oldetoolshop.com/forsale/may/woodenmallet0501d.jpg
http://oldetoolshop.com/forsale/may/woodenmallet0501e.jpg
Unusual Early Hand Forged Pick Punch Head. Measuring 7" long, the face
is roughly 1/2" square, and this weighs 9 1/2 oz unboxed. Not signed as
to the maker. This is in fair condition and was cleaned. Kinda looks
like a dug piece to my eye. There is some overall pitting. The face
has a little mushrooming and the spike end is good. I'm thinking that
this was used on a strap head tool, since there is no eye, but that's
just a guess. This is what it is, but it is a neat and very old tool to
say the least. $17.00
http://oldetoolshop.com/forsale/may/earlypickhead0501a.jpg
http://oldetoolshop.com/forsale/may/earlypickhead0501b.jpg
Stanley No 49 1904 Patent Auger Bit Depth Gage. This weighs 4 1/2 oz
unboxed. Arthur D. Campbell of Wilkes-Barre, PA was granted Pat. No.
772,211 on Oct. 11, 1904 for the design of this tool. This is in
reasonably good condition for being 100 plus years old, and was
cleaned. There is a little rust staining on the body, but this almost
all of the plating, except for the pads which have some wear and light
patina. The screws and nuts are good. This ain't minty, but there
ain't too many of this vintage that are, and it sure ain't bad. $25.00
http://oldetoolshop.com/forsale/may/bracetool0501a.jpg
http://oldetoolshop.com/forsale/may/bracetool0501b.jpg
http://oldetoolshop.com/forsale/may/bracetool0501c.jpg
http://oldetoolshop.com/forsale/may/bracetool0501d.jpg
L S Starrett No 26 Firm Joint 18 Inch Outside Caliper. Measuring 18
1/2" long and this weighs 1 lb 8 3/4 oz unboxed. This is in decent
condition and was cleaned. There is some frosting, light scuffs, a few
spots of light pitting, and a user name on the back. The joint is good
and holds position. The tips are also good. This ain't pristine, but
if that's what you want, they only sell for 3 times what I'm asking for
this one. Just saying. $40.00
http://oldetoolshop.com/forsale/may/machinisttool0501a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0501b.jpg
http://oldetoolshop.com/forsale/may/machinisttool0501c.jpg
http://oldetoolshop.com/forsale/may/machinisttool0501d.jpg
Vintage Hand Forged Farriers Clinch Anvil Block. Measuring 4 1/8"
overall in length, 2 1/8" high, the face is 2 3/8" long, 1 7/8" wide,
and this weighs 1 lb 1 oz unboxed. Not signed as to the maker. This is
in fair condition and was cleaned. There is some overall pitting, I
guess this guy spent a lot of time out in the barn. Other than that,
this guy is solid. Yeah, you can buy a new one, but this guy does have
some age to it. $25.00
http://oldetoolshop.com/forsale/may/hffarrierstool0501a.jpg
http://oldetoolshop.com/forsale/may/hffarrierstool0501b.jpg
http://oldetoolshop.com/forsale/may/hffarrierstool0501c.jpg
http://oldetoolshop.com/forsale/may/hffarrierstool0501d.jpg
http://oldetoolshop.com/forsale/may/hffarrierstool0501e.jpg
Heavy Vintage Machinist Surface Gage. Measuring 9" high, the base is 3
11/16" in diameter, the pointer is 10 3/4" long, and this weighs 2 lbs 1
1/2 oz unboxed. Marked E Oliver, might be a user or a maker. This is
in reasonably good condition and was cleaned. There is a little
frosting, but nothing too bad patina wise. The base has a small chip on
the top and 3 user added notches on the underside. The pointer also has
some frosting, but both tips are good. The clamp screw and nut work and
were oiled. This ain't perfect, but it's definitely not a commonly found
style of this tool. $30.00
http://oldetoolshop.com/forsale/april/machinisttool0415a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0415b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0415c.jpg
Hand Forged Stone Mason Dressing Hammer Head. Measuring 6 9/16" long,
the faces are 1 3/8" wide, 5/16" and 3/8" high, and this weighs 1 lb 11
1/2 oz unboxed. There is a faint maker's mark on the side, but nothing
I can read. This has a wrought iron body with steel faces. This is in
decent condition and was cleaned. There is some overall pitting and
patina. Both faces are good with no chips. The punched eye is also
good save for a little crusty and a few tiny dings on the top. This
ain't minty, but drop it on a handle and it will get the job done. $19.00
http://oldetoolshop.com/forsale/april/stonetool0401a.jpg
http://oldetoolshop.com/forsale/april/stonetool0401b.jpg
http://oldetoolshop.com/forsale/april/stonetool0401c.jpg
Wooden D-Router Plane To Restore Or Collect. Measuring 10 1/8" long, 4
7/16" wide, 1 5/8" high, and this weighs 13 1/2 oz unboxed. Not signed
as to the maker. This is in fair condition and was cleaned. The body
looks to oak. That has some wear and the front is chipped on the small
knobs. There are also some stains. The sole area is fairly good. The
clamp is good and the nut, while pitting, does work. This will need a
blade, I didn't get one with it. This is what it is, but it ain't like
these guys show up every day either. $25.00
http://oldetoolshop.com/forsale/april/woodenrouter0402a.jpg
http://oldetoolshop.com/forsale/april/woodenrouter0402b.jpg
http://oldetoolshop.com/forsale/april/woodenrouter0402c.jpg
http://oldetoolshop.com/forsale/april/woodenrouter0402d.jpg
P S & W No 793 Tinsmith Tin Sheet Metal Benders Bending Pliers.
Measuring 7 1/8" long, the jaws are 3 7/16" wide, and this weighs 12 3/4
oz unboxed. This is in decent condition and was cleaned. There is some
overall light patina. The jaws have some tiny dings on the edges and
the one is warped outwards a little at the ends. They do close up
fairly flush. The depth adjustment screws are MIA, but a lot of folks
didn't use them, and it is a standard thread. The joint is good with
just a little play. This ain't minty, but it will get the job done. $24.00
http://oldetoolshop.com/forsale/april/tintool0403a.jpg
http://oldetoolshop.com/forsale/april/tintool0403b.jpg
http://oldetoolshop.com/forsale/april/tintool0403c.jpg
http://oldetoolshop.com/forsale/april/tintool0403d.jpg
L A Sayre & Co 6 Inch Flat Jaw Pliers. Measuring 6" long, the jaws are
1" deep, 3/8" wide at the tips, and this weighs 5 oz unboxed. L A Sayre
was a Newark NJ tool maker and dealer who was in business from 1884
until 1916. This is in decent condition and was cleaned. There is some
light pitting and patina. The jaws are good with some of the cross
hatching still visible. All of the wire cutters are also good as is the
joint that has almost no play to it. This ain't pretty or perfect, but
for being well over the 100 year old mark, it sure ain't bad either. $14.00
http://oldetoolshop.com/forsale/april/pliers0403a.jpg
http://oldetoolshop.com/forsale/april/pliers0403b.jpg
http://oldetoolshop.com/forsale/april/pliers0403c.jpg
http://oldetoolshop.com/forsale/april/pliers0403d.jpg
Ball Peen 2 1/2 Lb Hammer Head. Measuring 5 5/16" long, the face is 1
7/16" in diameter, the peen is 1 7/16" in diameter, and this weighs 2
lbs 8 oz unboxed. The only mark is that D on the underside of the
peen. This is in reasonably good condition and was cleaned. There is
some wear to the finish on the back side and a little light patina. The
face is good save for some very tiny dings. The peen has a light
scratch mark and a little frosting. The eye is good. This ain't
perfect, but drop it on a handle and it will get the job done. $18.00
http://oldetoolshop.com/forsale/april/hammer0407a.jpg
http://oldetoolshop.com/forsale/april/hammer0407b.jpg
http://oldetoolshop.com/forsale/april/hammer0407c.jpg
http://oldetoolshop.com/forsale/april/hammer0407d.jpg
Stearns No 85 Door Butt Marking Gage. This weighs 10 1/2 oz unboxed.
This is in good condition and was not cleaned. There is a little rust
staining, but nothing too bad. The plating is good and the rulings are
readable. Both screws work and the tips are good. I gotta say, that
this is not a commonly found tool by this maker. $27.00
http://oldetoolshop.com/forsale/april/markinggage0402a.jpg
http://oldetoolshop.com/forsale/april/markinggage0402b.jpg
http://oldetoolshop.com/forsale/april/markinggage0402c.jpg
Hand Forged Rivet Set or Setter. Measuring 4 11/16" long, the post hole
is 3/16" in diameter, the dimple is 9/32", and this weighs 7 3/4 oz
unboxed. Not signed as to the maker. There is a user mark on both
sides. This is in reasonably good condition and was cleaned. There are
a few spots of light patina, but nothing too bad. The face, post hole,
and dimple are all good. The striking end has a little mushrooming, but
it's good with no cracks that I can see. I gotta say, that these guys
are sure are have been few and far between of late. $18.00
http://oldetoolshop.com/forsale/april/rivetset0401a.jpg
http://oldetoolshop.com/forsale/april/rivetset0401b.jpg
http://oldetoolshop.com/forsale/april/rivetset0401c.jpg
Stanley No 80 Scraper Plane With Orig Blade. This weighs 1 lb 6 1/2 oz
unboxed. This is in reasonably good condition and was cleaned. The
sole has some light scratches and wear, but nothing too bad. The
japanning is original and about 80% present. There are user initials
scratched on the front. The blade is original to the tool. That has
some frosting and light patina, but it's good enough to use and there
still is plenty left to work with. The blade clamp has a little
frosting, but has all of the plating. All the screws work and were
oiled. This ain't minty, but it will get the job done. $38.00
http://oldetoolshop.com/forsale/april/stanley800401a.jpg
http://oldetoolshop.com/forsale/april/stanley800401b.jpg
http://oldetoolshop.com/forsale/april/stanley800401c.jpg
http://oldetoolshop.com/forsale/april/stanley800401d.jpg
http://oldetoolshop.com/forsale/april/stanley800401e.jpg
Early Hand Forged Sugar Nipper. Measuring 8 1/2" long and this weighs 8
oz unboxed. Not signed as to the maker. This is in reasonably good
condition and was cleaned. There is a little overall light patina. The
tips are good. The through the center joint does have a little play.
This one ain't as fancy as some of these guys, but they sure don't show
up very often either. $50.00
http://oldetoolshop.com/forsale/april/earlysugarnipper0401a.jpg
http://oldetoolshop.com/forsale/april/earlysugarnipper0401b.jpg
http://oldetoolshop.com/forsale/april/earlysugarnipper0401c.jpg
http://oldetoolshop.com/forsale/april/earlysugarnipper0401d.jpg
Brown & Sharpe No 800 3 Inch Toolmaker Divider. Measuring 3 11/16" long
(from the tips to the top of the spring) and this weighs 3/4 oz
unboxed. This is in reasonably good condition and was cleaned. There
ain't much in the way of patina the fuss about. The spring and tips are
good. The nut travels the full distance smoothly. This ain't perfect,
but it is a top quality tool that will get the job done. $27.00
http://oldetoolshop.com/forsale/april/machinisttool0407a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0407b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0407c.jpg
A Whole Bunch Of Hand Knapped Musket Flints. There are about 60 that
are fairly good, but some could stand a tune up and 17 pieces that could
be re-worked for smaller locks. They is what they is. $45.00
http://oldetoolshop.com/forsale/april/musketflints0401a.JPG
http://oldetoolshop.com/forsale/april/musketflints0401b.JPG
http://oldetoolshop.com/forsale/april/musketflints0401c.JPG
http://oldetoolshop.com/forsale/april/musketflints0401d.JPG
P S & W 6 Inch Carpenters Nail Pulling Pliers. Measuring 6 3/4" long,
the jaws are 13/16" deep, 5/8" wide at the tips, and this weighs 7 oz
unboxed. This is in decent condition and was cleaned. There is some
overall light patina, but this is a cast tool and was never finished off
real pretty to start with. The jaws have some light pitting, but the
edges are good and they close up tight. The joint is good with just a
little wiggle. The tack claws are good, but the screwdriver tip has a
little wear. This ain't the prettiest, but it is a quality tool that
will get the job done. $14.00
http://oldetoolshop.com/forsale/april/pliers0402a.jpg
http://oldetoolshop.com/forsale/april/pliers0402b.jpg
http://oldetoolshop.com/forsale/april/pliers0402c.jpg
http://oldetoolshop.com/forsale/april/pliers0402d.jpg
Vintage Plumb 10 oz Riveting Hammer. Measuring 10 1/8" overall, the
head is 4 1/16" long, the face is 11/16" in diameter, the peen is 7/8"
wide, and this weighs 11 3/4 oz total unboxed. This is in decent
condition and was cleaned. There is some light patina on the head. The
face is good save for some tiny dings. The peen does have a small chip
off the edge. The handle is a somewhat recent replacement. That has
some bits of paint and a tiny check under the eye, but it's solid and
the head is on tight. This ain't minty, but it will get the job done.
$15.00
http://oldetoolshop.com/forsale/april/hammer0402a.jpg
http://oldetoolshop.com/forsale/april/hammer0402b.jpg
http://oldetoolshop.com/forsale/april/hammer0402c.jpg
----------------------------------------
"It is a great thing to know the season for speech and the season for
silence."
Seneca the Elder
Tony
Olde River Hard Goods
http://www.oldetoolshop.com
TSMusic on Facebook
http://www.facebook.com/tonyseomusic
|
