OldTools Archive

Recent Bios FAQ

277371 Tony Seo 2023‑05‑20 Jacktown Blue Mountain Spring 2023 Flea Market Day 2
Today was the official kickoff for the Jacktown Blue Mountain Spring
2023 Flea Market.  I got there around 6:30 AM after a quick stop at
another flea market and the weather was cloudy and in the 50's.  There
were a lot more vendors there today than yesterday and things got busy
pretty fast.

It got misty there, but not raining thankfully.

http://oldetoolshop.com/jointer/bffiles/2023/jacktownspring05202023d2f1.jpg

There were a lot more vendors than yesterday, but the place wasn't
filled to capacity as in previous years.

http://oldetoolshop.com/jointer/bffiles/2023/jacktownspring05202023d2f2.jpg

Folks were setup in the exhibition areas as well.

http://oldetoolshop.com/jointer/bffiles/2023/jacktownspring05202023d2f3.jpg

I made a quick stop at the Saylorsburg Flea market which is on the way
to Jacktown and got that Spofford brace and a 1 1/4" corner close. 
Pickings at Jacktown were steady, I got a Stanley SW bevel, an early
Disston bevel, an English screw lock pivot blade bevel, a small
turnscrew, an Osborne belt end punch, an Osborne oval or slot punch, a
Starrett No. 490 combination square protractor head, a Starrett depth
gage, a Bemis & Call patented saw set, a Sargent round leather belt
pliers, and a couple of cobbler's lasting pliers.

http://oldetoolshop.com/jointer/bffiles/2023/jacktownspring05202023d2t1.jpg

I had promised myself not to overload the knapsack, but that didn't
happen..sigh.  There is an Emir jointer's mallet, a big burl stone
cutter's mallet, a 2 1/2 lb straight peen hammer head, that might have
some problems, a small saw setting wrest, a W Butcher No. 1 cooper's
adze head, a hand forged round groove tin seamer, a big C Brombacker NY
gimlet with a 2 tone rosewood handle, a jointer's hammer head, a hand
forged curved face blacksmith upset tool, and a short, but usable froe.

http://oldetoolshop.com/jointer/bffiles/2023/jacktownspring05202023d2t2.jpg

Let's just say that I have LOTS of work to done....

Tony (Day 2 in the bag, one more early morning, then I can sleep a little)


--
Facebook
https://www.facebook.com/tonyseomusic
Old River Hard Goods
http://oldetoolshop.com/

Recent Bios FAQ