OldTools Archive

Recent Bios FAQ

275858 Tony Seo 2022‑07‑03 Re: Whatsit/drawbore pin?
On 7/3/2022 4:09 PM, Bill Ghio via groups.io wrote:
> I have had this pin laying around for a while now. I picked it up thinking it
was a drawbore pin, but thought I should ask for some thoughtful opinions. The
pin is 5 1/2 inches long, so shorter than what I have typically seen. It has a
hole driven through the upper portion to facilitate removal. From the
mushrooming on the head it looks to have been driven hard. There is what appears
to be an owner’s mark that  reads  “T.H. GOUGH”
>
> So, drawbore pin or?
>
> https://www.flickr.com/photos/77280442@N.../albums/72177720300279511

Yepper, that's a draw bore pin.  Early one at that.

Tony (working away as always)

--

Facebook
https://www.facebook.com/tonyseomusic
Old River Hard Goods
http://oldetoolshop.com/

Recent Bios FAQ