Round three for June. Summer has been slow to get into full bloom here
this year, it was 50F both mornings at the flea market this weekend and
the wind was blowing so hard, that I had to dig out some gloves to keep
the old fingers working. Geez. But pickings were good and there is a
fresh batch of goodies this time around, lots of machinist items and
some other tools of interest as well.
PayPal is preferred (if you use it) on all items. It's easier for me to
ship items off of a paid PayPal invoice, especially First Class ones.
Checks and money orders are still welcome.
And remember........da more ya buy, the cheaper they fly!
First contact (that is e-mail, or phone) that says I want it gets it.
Prices do not include shipping. All items are shipped with Delivery
Confirmation. Insurance, unless it is a big order or a very fragile item
is optional. Just let me know. Also, I am shipping a lot more stuff via
First Class mail. There will be a small amount added to the shipping
cover the cost of the padded mailer. I don't get them for free.
Please put your name and address in the message. Saves time and email
traffic!
---------------------------------------------------
L S Starrett No 83 4 Inch Yankee Pattern Machinist Divider. Measuring 4
13/16" long (from the tips to the top of the joint) and this weighs 1
1/2 oz unboxed. This is in reasonably good condition and was cleaned.
There ain't much in the way of patina to fuss about. The spring and
tips are good. The quick set nut works and the threads are good save
for some staining. This ain't minty, but it's pretty darn close. $20.00
http://oldetoolshop.com/forsale/june/machinesttool0612a.jpg
http://oldetoolshop.com/forsale/june/machinesttool0612b.jpg
http://oldetoolshop.com/forsale/june/machinesttool0612c.jpg
http://oldetoolshop.com/forsale/june/machinesttool0612d.jpg
Utica No 1300-8 8 Inch Gas Line Pliers Good Shape Working Trade Tool READ
Utica No 1300-8 8 Inch Gas Line Pliers. Measuring 8 1/2" long, the jaws
are 2" deep, 7/16" wide, and this weighs 10 3/4 oz unboxed. This is in
condition and was cleaned. There are a couple of small and light pitted
spots around the jaws. There also is a user name scratched on the front
of the joint. The jaws have a few small spots of rust, but all the
teeth are present and are crispy. The lap joint is good. This ain't
perfect, but it will get the job done. $17.00
http://oldetoolshop.com/forsale/june/pliers0609a.jpg
http://oldetoolshop.com/forsale/june/pliers0609b.jpg
http://oldetoolshop.com/forsale/june/pliers0609c.jpg
Pair L S Starrett 6 Inch Yankee Pattern Calipers No 73 & 79 Good Shape READ
TWO L S Starrett 6 Inch Yankee Pattern Calipers. On the left is a No.
73 inside caliper measuring 6 15/16" long, on the right is a No. 79
outside caliper measuring 6 15/16" long, and they weigh 6 oz unboxed.
These are in reasonably good condition and were cleaned. The inside
caliper has some light scuffs and a stain on the legs. The outside has
some frosting and a user name marked on the front. The joints and tips
are good. The inside does have the quick set nut, the outside has the
regular nut, and both work just fine. These ain't pristine, but overall
they sure ain't bad, and they will get the job done.
http://oldetoolshop.com/forsale/june/machinesttool0611a.jpg
http://oldetoolshop.com/forsale/june/machinesttool0611b.jpg
http://oldetoolshop.com/forsale/june/machinesttool0611c.jpg
L S Starrett No 467 Thickness Gage. Measuring 4 7/8" long and this
weighs 6 oz unboxed. This is in reasonably good condition and was no
cleaned. The case has some light scuffs. The blades have some spots of
light patina, scuffs, and a few dings, but all are usable. The locking
screw works. This ain't perfect, but it will get the job done. $18.00
http://oldetoolshop.com/forsale/june/machinesttool0610a.jpg
http://oldetoolshop.com/forsale/june/machinesttool0610b.jpg
http://oldetoolshop.com/forsale/june/machinesttool0610c.jpg
http://oldetoolshop.com/forsale/june/machinesttool0610d.jpg
Kraeuter No 1741-6 Flat Jaw Pliers. Measuring 6 3/8" long, the jaws are
1 15/16" deep, 5/16" wide, and this weighs 4 1/4 oz unboxed. This is in
reasonably good condition and was cleaned. There ain't much in the way
of patina to fuss about. The jaws are good and close up tight and
flush. The lap joint is a little stiff and I did put some oil down in
there, but there is no play. This ain't pristine, but it's a top
quality tool that will get the job done. $16.00
http://oldetoolshop.com/forsale/june/pliers0607a.jpg
http://oldetoolshop.com/forsale/june/pliers0607b.jpg
http://oldetoolshop.com/forsale/june/pliers0607c.jpg
Whitcher Crispen No 3 Cobblers Hammer Head. Measuring 3 1/2" long, the
face is 1 9/16" in diameter, the peen is 1 3/16" wide, and this weighs
15 1/4 oz unboxed. This is in decent condition and was cleaned. There
is some frosting, spots of light pitting, some dings, and user initials
pin punched loudly on both sides of the eye. The face has some wear,
dings, and the start of some mushrooming. The peen also has some wear
and mushrooming, and I did run file over some of the sharper bits on the
underside. The eye has some light dings on the inside at the top, but
it's solid with no cracks. This ain't pristine by any stretch, but it
is a solid old tool that will get the job done. $17.00
http://oldetoolshop.com/forsale/june/hammer0611a.jpg
http://oldetoolshop.com/forsale/june/hammer0611b.jpg
http://oldetoolshop.com/forsale/june/hammer0611c.jpg
http://oldetoolshop.com/forsale/june/hammer0611d.jpg
Early Hand Forged Hammer Poll Carpenters Adze Head. Measuring 7 3/4"
long (straight across), 4 1/8" wide across the edge, and this weighs 2
lbs 3 oz unboxed. Not signed as to the maker. This is in decent
condition and was cleaned. There is some overall pitting and patina.
The steel bit has some light pitting and the forge weld line where it
meets the wrought iron body is visible, but it's not cracked. The edge
was dressed recently and is good. The eye does have a few small checks
on the front and back, but nothing too deep. That won't be a problem
with a correctly shaped handle. The hammer poll has some dings and a
little bit of mushrooming. This ain't pretty or perfect, but tools of
this age rarely are. $30.00
http://oldetoolshop.com/forsale/june/hfadze0601a.jpg
http://oldetoolshop.com/forsale/june/hfadze0601b.jpg
http://oldetoolshop.com/forsale/june/hfadze0601c.jpg
http://oldetoolshop.com/forsale/june/hfadze0601d.jpg
Craftsman No 5479 Tapered Reamer. Measuring 5 5/8" overall, the reamer
is 3 11/16" long, 1/16" in diameter at the tip, 7/16" at the top, and
this weighs 3 1/4 oz unboxed. This is in decent condition and was
cleaned. The flutes have some light patina down inside and some very
light dings on the edges, but are sharp to the touch. The head and
handle are good. This ain't pristine, but it will get the job done. $14.00
http://oldetoolshop.com/forsale/june/reamer0601a.jpg
http://oldetoolshop.com/forsale/june/reamer0601b.jpg
TWO Jennings & Griffen No 5 Socket Firmer Chisels. The one on the left
is 3/8" wide, measures 7 3/4" from the edge to the end of the socket,
the blade is 5 5/16" long, the one on the right is 1" wide, measures 8
9/16" from the edge to the end of the socket, the blade is 5 1/2" long,
and they weigh 11 1/4 oz unboxed. These are in fair condition and were
cleaned by someone else. The 3/8" has some light pitting up by the
edge, but after that it's fairly good. The 1" has some light scuffs and
some dings on the edges. The top of the 3/8" also has some pitting and
the 1" has some scuffs and dings. The socket on the 3/8" has some light
pitting and the 1" does have some mushrooming on the outside. They will
both need handles. These ain't pretty or perfect, but for the money and
a bit of work, they will get the job done. $15.00
http://oldetoolshop.com/forsale/june/chisel0604a.jpg
http://oldetoolshop.com/forsale/june/chisel0604b.jpg
http://oldetoolshop.com/forsale/june/chisel0604c.jpg
Early Hand Forged 12 Inch Wing Compass Or Divider. Measuring 12" long
(from the tips to the top of the joint) and this weighs 13 1/2 oz
unboxed. Not signed as to the maker. This is in decent condition and
was cleaned. There is some overall pitting and patina. The 3 finger (2
+ 1) joint is a little loose, but it does open up completely. The
locking screw was replaced at some point and a nut welded on the top of
the leg. This ain't the prettiest job, but it works. The one tip is a
little shorter than the other one and there is a chisel mark on the
side. Why, you ask? I have not a clue. This ain't minty, but then
tools of this age rarely are, but this guy will get the job done. $30.00
http://oldetoolshop.com/forsale/june/earlydivider0602a.jpg
http://oldetoolshop.com/forsale/june/earlydivider0602b.jpg
http://oldetoolshop.com/forsale/june/earlydivider0602c.jpg
http://oldetoolshop.com/forsale/june/earlydivider0602d.jpg
TWO L S Starrett No 59 A Machinist Trammel Points. The steel points are
9" long, and the points and bodies weigh 11 1/2 oz unboxed. These are in
reasonably good condition, the only cleaning was to pretty up the steel
points a bit. The heads have some staining and shop patina and there
are user initials on the bottoms. All the screws work. The steel
points are good and quite pointy. These ain't pristine, but they are
quality tools that will get the job done. $45.00
http://oldetoolshop.com/forsale/june/machinesttool0606a.jpg
http://oldetoolshop.com/forsale/june/machinesttool0606b.jpg
http://oldetoolshop.com/forsale/june/machinesttool0606c.jpg
http://oldetoolshop.com/forsale/june/machinesttool0606d.jpg
http://oldetoolshop.com/forsale/june/machinesttool0606e.jpg
L S Starrett No 277 2 Inch Toolmakers Dividers. Measuring 2 11/16" long
(from the tips to the top of the joint) and this weighs 1/2 oz unboxed.
This is in reasonably good condition and was cleaned. The legs have
some frosting, but nothing too bad. The joint and tips are good. The
threads on the screw have some dings pretty far out, but the nut works
and holds. This ain't pristine and it sure ain't got that kind of price
tag, but it will get the job done. $40.00
http://oldetoolshop.com/forsale/june/machinesttool0609a.jpg
http://oldetoolshop.com/forsale/june/machinesttool0609b.jpg
http://oldetoolshop.com/forsale/june/machinesttool0609c.jpg
Complete Set Of FOUR L S Starrett No 162 Machinist Pin Vises. The sizes
are A, B, C, D, and they weigh 3 oz unboxed. These have one of the
older logos. These are in reasonably good condition and were lightly
cleaned. There ain't much patina other than a little staining. All the
chucks and jaws are good and the handles are clear all the way through.
Short of buying a brand new set, they don't get much better than this.
$55.00
http://oldetoolshop.com/forsale/june/machinesttool0602a.jpg
http://oldetoolshop.com/forsale/june/machinesttool0602a.jpg
http://oldetoolshop.com/forsale/june/machinesttool0602a.jpg
Brown & Sharpe No.599-313-620 Metric 150mm Rule. This weighs 1 oz
unboxed. Made in Merry Olde England. This is in good condition and was
not cleaned. Other than a few light stains, there is nothing much
patina wise. All the rulings are readable and the edges and corners are
good. These guys sure don't show up very often, at least around these
here parts. $17.00
http://oldetoolshop.com/forsale/june/machinesttool0603a.jpg
http://oldetoolshop.com/forsale/june/machinesttool0603b.jpg
http://oldetoolshop.com/forsale/june/machinesttool0603c.jpg
Brown & Sharpe No 599-323-605 6 Inch Tempered Flex Steel Rule & Case.
This weighs 1/4 oz unboxed. Made in USA. This is ruled in 10ths and
100ths on the front and 32nds and 64ths on the back. This is in good
condition and was not cleaned. Other than a few light stains, there is
nothing much patina wise. All the rulings are readable and the edges
and corners are good. The case has some stains, but it's solid. This
is a top quality rule to say the least. $14.00
http://oldetoolshop.com/forsale/june/machinesttool0604a.jpg
http://oldetoolshop.com/forsale/june/machinesttool0604b.jpg
http://oldetoolshop.com/forsale/june/machinesttool0604c.jpg
Vintage 7 Inch Advertising English & Metric Wooden Rule. This weighs
1/2 oz unboxed. From what I can find, Frederick H. Cone & Company were
New York based importers, looks to have been of artist supplies, in the
1930's and he passed away in 1945. This is in good condition and was
not cleaned. There are a couple lightly stained spots and some scuffs.
The brass has some light patina. All the rulings are readable and the
edges and corners are good. This is a neat older rule to say the least.
$15.00
http://oldetoolshop.com/forsale/june/rule0601a.jpg
http://oldetoolshop.com/forsale/june/rule0601b.jpg
http://oldetoolshop.com/forsale/june/rule0601c.jpg
Blacksmith Hand Forged Hot Cold Cut Chisel Head. Measuring 6 11/16"
long, the edge is 1 7/16" high, and this weighs 3 lbs 2 oz unboxed. Not
signed as to the maker. This is in reasonably good condition and was
cleaned. There is the usual patina including some light cut marks on
the body. The edge is fairly good. The striking end does have some
wear, mushrooming, and a small check on the one side. The punched eye
is good to go. This ain't minty, but it sure ain't bad, and it will get
the job done. $19.00
http://oldetoolshop.com/forsale/june/blacksmith0601a.jpg
http://oldetoolshop.com/forsale/june/blacksmith0601b.jpg
http://oldetoolshop.com/forsale/june/blacksmith0601c.jpg
Fulton Special Perfect Handle 10 Inch Screwdriver. Measuring 10 3/4"
long, the tip is 5/16" wide, and this weighs 7 3/4 oz unboxed. Fulton
was a brand name used by Sears on some of it's tools. This was made by
P. S. & W. There is a maker's mark on the blade, but it's pretty
faint. This is in reasonably good condition and was cleaned. There is
some frosting on the blade and shaft. The tip has some wear, but was
never messed with. The handle scales have some dings and stains, but
are solid and on tight. The end of the handle has some light dings.
This ain't pristine, but it sure ain't bad. $18.00
http://oldetoolshop.com/forsale/june/phsd0603a.jpg
http://oldetoolshop.com/forsale/june/phsd0603b.jpg
http://oldetoolshop.com/forsale/june/phsd0603c.jpg
E C Stearns No 500 Pat Pend Folding Hand Saw Vise. Measuring 12" long
and this weighs 2 lbs 9 1/2 oz unboxed. This is in decent condition and
was cleaned. There is some wear and patina on the black finish. There
are also user initials scratch marked on the back. The plating on the
blade clamp also has some wear and rusting. That does work and still
has the rubber strip on the inside. The workbench clamp screw also
works. This ain't pretty or perfect, but it will get the job done. $22.00
http://oldetoolshop.com/forsale/june/sawvise0601a.jpg
http://oldetoolshop.com/forsale/june/sawvise0601b.jpg
http://oldetoolshop.com/forsale/june/sawvise0601c.jpg
TWO Vintage Semi-Steel Cast C-Clamps. The smaller one opens to 15/16",
the throat is 1 1/8" deep, the bigger one opens to 2 7/16", the throat
is 1 7/16" deep, and they weigh 14 1/2 oz unboxed. These are in
reasonably good condition and were cleaned. There ain't much in the
way of patina, but then these guys were never real pretty to begin
with. The bodies are solid with no cracks that I can see. Both screws
have a little patina on the threads, but they both have the pads, and
travel the full distance. These ain't minty, but they are solid tools
that will get the job done. $16.00
http://oldetoolshop.com/forsale/june/clamp0602a.jpg
http://oldetoolshop.com/forsale/june/clamp0602b.jpg
http://oldetoolshop.com/forsale/june/clamp0602c.jpg
http://oldetoolshop.com/forsale/june/clamp0602d.jpg
Keen Kutter No 84 8 Inch Sweep Brace. This weighs 2 lbs 5 1/4 oz
unboxed. This was made by the John S. Fray & Co. for Keen Kutter. This
is in decent condition and was cleaned. The plating on the arms is worn
and there is a little frosting. The plating on the chuck and ratchet is
also worn. The chuck and jaws are good and the ratchet works in both
directions and the locked position. Both of them could stand a wee bit
of oil. The grip and pad both have some dings, but they are solid and
spin freely. This ain't perfect, but it will get the job done. $24.00
http://oldetoolshop.com/forsale/june/brace0601a.jpg
http://oldetoolshop.com/forsale/june/brace0601b.jpg
http://oldetoolshop.com/forsale/june/brace0601c.jpg
http://oldetoolshop.com/forsale/june/brace0601d.jpg
Japan 1 1/2 Lb Small Sledge Hammer. Measuring 9" overall, the head is 2
5/16" long across the top, the faces are about 1 9/16" wide, 1 3/8"
high, and this weighs 1 lb 9 1/4 oz unboxed. Not signed as to the
maker, this is just marked Japan on the underside of the head. This is
in decent condition and was cleaned. The head has a little wear to the
finish. Both faces have some dings, wear, and there is the start of
some mushrooming. I did run a file over some of the sharper bits. The
handle is good save for a few stains. This ain't minty, but it's a
solid tool that will get the job done. $18.00
http://oldetoolshop.com/forsale/june/hammer0610a.jpg
http://oldetoolshop.com/forsale/june/hammer0610b.jpg
http://oldetoolshop.com/forsale/june/hammer0610c.jpg
http://oldetoolshop.com/forsale/june/hammer0610d.jpg
Sorby 6 Inch Jointers Mitre Square. The blade is 6 3/16" long across
the top and this weighs 4 1/4 oz unboxed. The mark is faint, but I can
ready Sorby and part of Sheffield. This is in decent condition and was
cleaned. The blade does have some spots of pitting. The edges and
corners are good. The rosewood handle has a couple of thin checks under
the rivet plates, some dings, and some wear to the edges, but the blade
is on tight. This ain't perfect, but these guys sure do not show up
every day. $24.00
http://oldetoolshop.com/forsale/june/square0601a.jpg
http://oldetoolshop.com/forsale/june/square0601b.jpg
http://oldetoolshop.com/forsale/june/square0601c.jpg
http://oldetoolshop.com/forsale/june/square0601d.jpg
Vintage Small Camp Axe Or Hatchet. Measuring 13 5/16" overall, the head
is3 15/16" long (across the center), the edge is 2 1/4" high (straight
across), and this weighs 1 lb 3/4 oz unboxed. Not signed as to the
maker. This is in decent condition and was cleaned. The head has some
pitting on both sides. The edge is fairly good and was dressed
recently, but it will need a couple wipes with a file. The poll has some
dings and had some mushrooming toned down at some point in time. The
handle is old and could be original to the tool. That has some dings,
stains, wear to the green paint finish, and some chipping at the end,
but it's solid enough to use. The head is on tight, at least setting
here. This ain't the prettiest, but it will get the job done. $24.00
http://oldetoolshop.com/forsale/june/axe0601a.jpg
http://oldetoolshop.com/forsale/june/axe0601b.jpg
http://oldetoolshop.com/forsale/june/axe0601c.jpg
Ford Auger Bit Company 1 Inch Brace Bit. Measuring 9 3/4" long and this
weighs 8 1/2 oz unboxed. The Ford Auger Bit Company was a Holyoke MA
toolmaker who was in business from 1891 until 1914. This is in
reasonably good condition and was cleaned. There is a little frosting,
but overall nothing too bad. The lead screw is good, but the cutter and
spur could stand a quick touch up. The tang is also good save for a
couple of tiny dings. I gotta say, that these guys are sure getting few
and far between of late. $15.00
http://oldetoolshop.com/forsale/june/bracetool0601a.jpg
http://oldetoolshop.com/forsale/june/bracetool0601b.jpg
S T Co No 9720 Slim 5/32 - 11/32 Tapered Brace Reamer. Measuring 6
3/16" overall, the reamer is 4 1/8" long, and this weighs 1 1/2 oz
unboxed. This is NOS (that's New Old Stock), but it wasn't stored some
place pretty. I did clean some light patina off of the tang and shaft
area. The flutes have some spots of light rust and oil staining, but
the edges are minty good. This ain't pristine, but it will get the job
done. $15.00
http://oldetoolshop.com/forsale/june/bracetool0602a.jpg
http://oldetoolshop.com/forsale/june/bracetool0602b.jpg
Signed Hand Forged Denglestock PA Dutch Scythe Sharpening Anvil.
Measuring 7 3/8" long, the face is 1 5/16" wide, and this weighs 1 lb 4
oz unboxed. There is a touch mark on the one side, but I can't make it
out. This has a steel face forge welded to a wrought iron body. This
is in decent condition and was cleaned. There is the usual patina found
on tools of this age. The face has some small chips. The forge weld
lines are visible, but this isn't cracked. The spike end is dulled and
would need a quick dressing. This ain't minty, but signed examples of
this tool are sure few and far between. $28.00
http://oldetoolshop.com/forsale/june/denglestock0601a.jpg
http://oldetoolshop.com/forsale/june/denglestock0601b.jpg
http://oldetoolshop.com/forsale/june/denglestock0601c.jpg
Plumb 4 Oz Ball Peen Hammer. Measuring 10 7/16" overall, the head is 2
11/16" long, the face is 3/4" in diameter, the peen is 5/8" in diameter,
and this weighs 6 oz total unboxed. This is in decent condition and was
cleaned. The head has some frosting and spots of light pitting. The
face and peen have some light frosting, but nothing too bad. The handle
has some wear to the finish, some dings, and a few tiny bits of paint,
but it's solid and on tight. This sure ain't pristine, but it is a
quality tool that will get the job done. $19.00
http://oldetoolshop.com/forsale/june/hammer0607a.jpg
http://oldetoolshop.com/forsale/june/hammer0607b.jpg
http://oldetoolshop.com/forsale/june/hammer0607c.jpg
Hand Forged Bark Or Debarking Spud Head. Measuring 14 3/4" long and
this weighs 1 lb 14 1/2 oz unboxed. Not signed as to the maker, this is
probably a White, but the patina ate the mark. This is in decent
condition and was cleaned. There is some overall light pitting and a
few deeper spots, but it ain't like bark removal is an indoor sport for
the most part. The head and edges are fairly good. The socket does
have a visible forge weld line, but it feels solid enough and it ain't
not recent. This ain't pristine, but these guys have sure been few and
far between of late. $32.00
http://oldetoolshop.com/forsale/june/hfbarkspud0601a.jpg
http://oldetoolshop.com/forsale/june/hfbarkspud0601b.jpg
http://oldetoolshop.com/forsale/june/hfbarkspud0601c.jpg
Stanley No 5 1/2 C Type 16 Jack Plane. This weighs 6 lbs 1/2 oz
unboxed. This is a Type 16 and was made by Stanley between 1933 and
1941. This is in decent condition and was cleaned. The sides have some
light pitting and rust etching. The sole also has some light pitting.
The japanning is original and about 95% present. There is a little
funky that didn't want to come off. The lever cap has some dots of
rust, but has almost all of the plating. The chipbreaker has a couple
of pitted and frosted spots. The blade has some pitting and rust
etching on the exposed areas and the back. The cutting face has a band
of light pitting and a few dots, but it's clean for the most part, and
there is lots to work with. The blade will need a sharpening. The tote
and knob are good save for a few tiny dings and have all of the original
finish plus a coat of wax. All the screws work and were oiled. This
ain't pretty or perfect, and it sure ain't got that kind of price tag,
but it will get the job done. $110.00
http://oldetoolshop.com/forsale/june/stanley5120601a.jpg
http://oldetoolshop.com/forsale/june/stanley5120601b.jpg
http://oldetoolshop.com/forsale/june/stanley5120601c.jpg
http://oldetoolshop.com/forsale/june/stanley5120601d.jpg
Stanley SW No 80 Cabinet Scraper Plane & Orig Blade. This weighs 1 lb 6
1/4 oz unboxed. This has the Christian Bodmer Pat. No. 1,098,706 issued
on June 2, 1914 and Design Pat. No. D45,983 issued on June 23, 1914
patent dates on the blade clamp bar. This is in decent condition and
was cleaned. The sole has some scratches and light dings. The
japanning is original and about 80% present. There is a little bit of
the decal showing on the front. The blade clamp has some light patina,
but still has almost all of the plating. The SW blade is short, but
could be used. The working face is fairly clean, but the edges would
need a tune-up. All the screws work and were oiled. This ain't minty,
but it will get the job done. $38.00
http://oldetoolshop.com/forsale/may/stanley800501a.jpg
http://oldetoolshop.com/forsale/may/stanley800501b.jpg
http://oldetoolshop.com/forsale/may/stanley800501c.jpg
http://oldetoolshop.com/forsale/may/stanley800501d.jpg
http://oldetoolshop.com/forsale/may/stanley800501e.jpg
Stanley SW No 12 1/2 Scraper Plane Body To Collect Or Restore. This
weighs 2 lbs 15 1/2 oz unboxed. The blade has the SW logo, there is
nothing on the body. This is in reasonably good condition and was
cleaned. The sides have some frosting, stains, and a few dings. The one
has a notch filed on the side and there is a corresponding notch on the
blade clamp, this was probably to mark the last user's favorite
position. The sole has some frosting and light scratches, but nothing
too bad. The rosewood sole is MIA. The mouth looks wide, but that's
how this guy was made, there are cast pieces on the inside that support
the clamp that go the full length of the mouth. The japanning is
original and about 90% on the body. There is some glue residue and a
few small bits of paint that didn't want to come off. The blade clamp
is good and travels the full distance. The SW blade is good save for a
little staining and somebody polished up the one end. The blade will
need a sharpening. The handle has some dings, stains, and wear, but
it's solid. All the screws work and were oiled. This will need some
work, but as is, this will get the job done. $75.00
http://oldetoolshop.com/forsale/may/stanley12120501a.jpg
http://oldetoolshop.com/forsale/may/stanley12120501b.jpg
http://oldetoolshop.com/forsale/may/stanley12120501c.jpg
http://oldetoolshop.com/forsale/may/stanley12120501d.jpg
http://oldetoolshop.com/forsale/may/stanley12120501e.jpg
http://oldetoolshop.com/forsale/may/stanley12120501f.jpg
Blacksmith 3 lb Cross Peen Hammer Head. Measuring 4 9/16" long, the
face is 1 5/8" square, the peen is 1 5/8" wide, and this weighs 3 lbs
unboxed. Not signed as to the maker, there is a user name on the back.
This is in decent condition and was cleaned. There are some dings and
light pitting on the head. The face has some dings, wear, a few cut
marks, and the start of some mushrooming. There is a thin check
starting behind the face on the one side, but it's not deep and doesn't
travel to the beveled areas. The peen has some light roughness, but
nothing too bad. The eye had some dinging cleaned out at some points
and some scuff marks inside from where a previous handle was removed
(not by me), but it's solid. This ain't perfect, but it's a solid tool
that will get the job done. $19.00
http://oldetoolshop.com/forsale/june/hammer0604a.jpg
http://oldetoolshop.com/forsale/june/hammer0604b.jpg
http://oldetoolshop.com/forsale/june/hammer0604c.jpg
http://oldetoolshop.com/forsale/june/hammer0604d.jpg
Vintage Craftsman 4 oz Ball Peen Hammer. Measuring 11 9/16" overall,
the head is 2 1/2" long, the face is 3/4" in diameter, the peen is 5/8"
in diameter, and this weighs 6 1/2 oz total unboxed. This is in decent
condition and was cleaned. The head has frosting and there are user
initials pin punched on the back. The face is fairly good save for some
very light dings, a whisker of mushrooming, and one tiny chip on the
edge. The peen is also good. The handle is old and could be the
original one. That has some dings, stains, and wear, but it's solid.
The head is on tight sitting here. This ain't perfect, but it is a
quality tool that will get the job done. $17.00
http://oldetoolshop.com/forsale/june/hammer0602a.jpg
http://oldetoolshop.com/forsale/june/hammer0602b.jpg
http://oldetoolshop.com/forsale/june/hammer0602c.jpg
Star Logo Cast Iron 8 Inch Hacksaw. Measuring 14 3/4" overall
(excluding the screw) and this weighs 1 lb unboxed. Not signed as to
the maker. This is in decent condition and was cleaned. The frame has
some light patina, but still has some of the original black finish. The
screw and nut are good. Both of the blade pins at the back are
present. The wood handle has some wear, stains, and it does wiggle a
little. This will need a blade. This ain't pristine, but it will get
the job done. $20.00
http://oldetoolshop.com/forsale/june/saw0601a.jpg
http://oldetoolshop.com/forsale/june/saw0601b.jpg
http://oldetoolshop.com/forsale/june/saw0601c.jpg
Founders Wooden Sand Casting Rammer. Measuring 12 5/16" long, the
straight face is 2 13/16" wide, 3/8" thick, the round face is 2 13/16"
in diameter, and this weighs 1 lb 1 3/4 oz unboxed. Not signed as to
the maker. This is in reasonably good condition and was cleaned. This
is made from maple. There are a few small stains. The straight face is
good and is varnished on the sides and face. The round face does have a
thin check and some long gone worm holes on the one side, but it's solid
and also is varnished. This ain't perfect, but these guys sure ain't
been showing up much of late in this kind of condition. $35.00
http://oldetoolshop.com/forsale/june/founderstool0601a.jpg
http://oldetoolshop.com/forsale/june/founderstool0601b.jpg
http://oldetoolshop.com/forsale/june/founderstool0601c.jpg
SIX Iron Bronze & Brass Founders Tools For Sand Casting. There are 2
iron spoons, measuring 4 7/8" and 5 1/2" long (straight across), a
bronze lifter tool, 8 9/16" long. the face is 7/8" in diameter, a round
brass tamper, 1 3/8" in diameter, a straight sided brass tamper, 1
11/16" long, 7/8" wide, an iron oval tamper, 2 5/8" long, 1 5/16" wide
at the center, and they weigh 10 3/4 oz unboxed. Not signed as to the
maker. These are in reasonably good condition and were cleaned. The
faces on the spoons have some tiny casting flaws, but nothing too bad.
The edges are good. The tamper also has a tiny flaw on the face and
some on the handle area. The round tamper has some wear on the one side
and the other two are good. These ain't pristine, but they are solid
tools that will get the job done. $30.00
http://oldetoolshop.com/forsale/june/founderstool0602a.jpg
http://oldetoolshop.com/forsale/june/founderstool0602b.jpg
http://oldetoolshop.com/forsale/june/founderstool0602c.jpg
Merit No 80 Style Cabinet Scraper Plane. Measuring 11" long. the blade
is 2 13/16" wide, and this weighs 1 lb 8 1/4 oz unboxed. Merit was a
brand name used by Sears, this looks like it was made by E C Stearns for
them. This is in reasonably good condition and was cleaned. The sole
has some factory machining marks and a few light scratches. The
japanning is original and 95% present. There is a little funky on there
and a few dings. The one handle has a small chip or casting flaw on the
side, there is japanning on it, so I'm pretty sure it's a flaw. The
blade is good save for some frosting. All the screws work and were
oiled. This ain't pristine, but it's a solid tool by a quality maker
that will get the job done. $30.00
http://oldetoolshop.com/forsale/june/meritscraper0601a.jpg
http://oldetoolshop.com/forsale/june/meritscraper0601b.jpg
http://oldetoolshop.com/forsale/june/meritscraper0601c.jpg
http://oldetoolshop.com/forsale/june/meritscraper0601d.jpg
Nork Los Angeles 4 Inch Toolmaker Outside Caliper. Measuring 4 15/16"
long and this weighs 1 1/2 oz unboxed. This is in reasonably good
condition and was lightly cleaned. There ain't nothing much patina wise
to fuss about. The spring and tips are good. The nut travels the full
distance. This is a quality tool that will get the job done. $22.00
http://oldetoolshop.com/forsale/may/machinisttool0518a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0518b.jpg
http://oldetoolshop.com/forsale/may/machinisttool0518c.jpg
Heller Bros 8 Inch Nail Pulling Pliers. Measuring 8 7/16" long, the
jaws are 3/4" deep, 13/16" wide at the tips, and this weighs 12 1/2 oz
unboxed. This is in reasonably good condition and was cleaned. There is
some overall light patina. The jaws have some frosting on the tops and
some light dings on the edges, but they close up tight and flush. The
joint is good. The tack claws have some wear and there is a casting
line on the one side, but it's not cracked. The screwdriver tip has a
little mushrooming. This ain't perfect, but it's a quality tool that
will get the job done. $18.00
http://oldetoolshop.com/forsale/may/nailpliers0501a.jpg
http://oldetoolshop.com/forsale/may/nailpliers0501b.jpg
http://oldetoolshop.com/forsale/may/nailpliers0501c.jpg
Early Coopers Hoop Dog With Hand Forged Hook. Measuring 19 3/4" overall
in length and this weighs 1 lb 11 oz unboxed. Not signed as to the
maker. This is in fair condition and was cleaned. The hook has some
pitting and patina, but nothing out of the ordinary for these kind of
tools. There is a visible forge weld line on the underside, but it's
not cracked. The handle is pretty rough. There are some long gone tiny
worm holes, some thin checks, and an area of dry rot at the end. This
sure ain't perfect, but these guys are sure getting few and far between
these days. $28.00
http://oldetoolshop.com/forsale/may/hfcooperstool0501a.jpg
http://oldetoolshop.com/forsale/may/hfcooperstool0501b.jpg
http://oldetoolshop.com/forsale/may/hfcooperstool0501c.jpg
http://oldetoolshop.com/forsale/may/hfcooperstool0501d.jpg
Stanley No 25 Type 1 10 Inch Adjustable Bevel Square. The blade is 10"
long, the handle is 7 1/16" high, and this weighs 5 oz unboxed. Not
signed as to the maker, but these guys rarely were. This is a Type 1
and was made by Stanley between 1859 and 1877. This is in decent
condition and was cleaned. The main area of the blade is fairly good
other than some frosting and staining. There are some pitted spots on
both sides of the slot. The edges and corners are good. The rosewood
handle has some dings, chips, and wear, but it's solid. There is a user
name stamped on the ends of the sides. The brass end plates have some
scuffs. The locking screw and nut are original and work. This ain't
pristine, but these guys rarely are. $18.00
http://oldetoolshop.com/forsale/may/square0506a.jpg
http://oldetoolshop.com/forsale/may/square0506b.jpg
http://oldetoolshop.com/forsale/may/square0506c.jpg
http://oldetoolshop.com/forsale/may/square0506d.jpg
Early 18th Century Hand Forged Outside Caliper. Measuring 6 7/16" high,
4 7/8" wide, and this weighs 2 3/4 oz unboxed. Not signed as to the
maker. This is in decent condition and the only cleaning was a wipe
down. There is some overall patina. The joint works, it holds in some
spots, and is loose in others. There are some visible forge weld lines
where the legs meet the joint arms, but this isn't cracked. The tips
are good. I have to say, that these early ones are sure getting few and
far between. $45.00
http://oldetoolshop.com/forsale/may/earlydivider0501a.jpg
http://oldetoolshop.com/forsale/may/earlydivider0501b.jpg
http://oldetoolshop.com/forsale/may/earlydivider0501c.jpg
http://oldetoolshop.com/forsale/may/earlydivider0501d.jpg
H Disston & Sons No 1 12 Inch Metric & English Try Square . The front is
ruled metric, the back English, and this weighs 13 1/2 oz unboxed. This
is in decent condition. A some point somebody powerwashed the blade and
I took off about 20 years of rust on top of that. The blade has some
scuffing on both sides and a few dots of pitting. The metric rulings
are faint and not very readable for the most part. The English rulings
are readable and there also some noticeable scratches on that side. The
edges have a few tiny dings, but are good for the most part and the
corners are good as well. The handle also has some dings and a few bits
of paint down in the grain. This ain't minty, and it sure ain't got
that kind of price tags, but these guys are sure few and very far
between. $30.00
http://oldetoolshop.com/forsale/may/square0504a.jpg
http://oldetoolshop.com/forsale/may/square0504b.jpg
http://oldetoolshop.com/forsale/may/square0504c.jpg
http://oldetoolshop.com/forsale/may/square0504d.jpg
http://oldetoolshop.com/forsale/may/square0504e.jpg
Buck Bros Scraper Plane Blade Burnisher. The blade is 3 13/16" long,
5/16" wide, 1/4" thick, this is 8 3/8" overall, and this weighs 2 1/2 oz
unboxed. The blade mark is faint. This is in reasonably good condition
and was cleaned. The blade has some frosted and stained spots, but
nothing too bad. The edges are good. The handle is original and also
has some staining, but it's solid. This ain't perfect, but these guys
sure have been few and far between of late. $22.00
http://oldetoolshop.com/forsale/may/burnisher0501a.jpg
http://oldetoolshop.com/forsale/may/burnisher0501b.jpg
Small Hand Forged From A File Draw Knife Or Drawknife. Measuring 9"
overall, the blade is 5 5/8" long, 5/8" wide at the one end, 9/16" at
the other, and this weighs 8 3/4 oz unboxed. Not signed as to the
maker. This is in reasonably good condition and was cleaned. The back
has some frosting and a couple of spots of light pitting, but overall
nothing too bad. The front has more of the same. The oak handles have
some dings, stains, and a few bits of paint down in the grain. The left
one wiggles a touch, but the tangs are peened over on the ends, so they
won't come off. This ain't got a fancy name, but it is a working and
collectible tool, and these small ones sure do not show up very often.
$28.00
http://oldetoolshop.com/forsale/may/hfdrawknife0501a.jpg
http://oldetoolshop.com/forsale/may/hfdrawknife0501b.jpg
http://oldetoolshop.com/forsale/may/hfdrawknife0501c.jpg
Hjorth Patent 1903 7 Inch Combined Pipe & Nut Wrench. Measuring 7" long
and this weighs 6 1/2 oz unboxed. Arthur W. Hjorth of Jamestown, NY was
granted Pat. No. 738,444 on Sept. 8, 1903 for the design of this tool.
This is in decent condition and was cleaned. There are some spots of
light pitting and somebody filed some notches along the top of the
head. The jaw teeth have a little wear. The wire cutter is cracked,
but the joint is fairly good with just a little play. The tack claws on
the end of the one handle are also good. This ain't pristine, but this
is not a commonly found size for this tool. $15.00
http://oldetoolshop.com/forsale/may/wrench0501a.jpg
http://oldetoolshop.com/forsale/may/wrench0501b.jpg
http://oldetoolshop.com/forsale/may/wrench0501c.jpg
http://oldetoolshop.com/forsale/may/wrench0501d.jpg
Vintage 10 Inch Adjustable Bevel Square. The blade is 9 1/2" long, the
handle is 5 13/16" high, and this weighs 4 1/4 oz unboxed. Not signed
as to the maker. This is in reasonably good condition and was cleaned
by someone else. He also likes the shiny stuff. The blade has some
stains, but nothing too bad patina wise. The edges and corners are
good. The rosewood handle has some light dings and a few bits of paint
down in the grain, but it also is good. The locking screw works. This
ain't gotta fancy name, but it is a quality older tool that will get the
job done. $19.00
http://oldetoolshop.com/forsale/may/square0505a.jpg
http://oldetoolshop.com/forsale/may/square0505b.jpg
http://oldetoolshop.com/forsale/may/square0505c.jpg
http://oldetoolshop.com/forsale/may/square0505d.jpg
Lufkin No 188 Jewelers Screwdriver. The handle is 3" long, the tip is
3/32" wide, and this weighs 1/2 oz unboxed. This is in reasonably good
condition and was not cleaned. There is a little patina, but nothing
too bad. The tip has a little wear. The chuck works and the top spins
freely. This ain't perfect, but it is a quality tool that will get the
job done. $14.00
http://oldetoolshop.com/forsale/may/machinisttool0508a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0508b.jpg
Vintage Stanley No 40 Pocket Level. Measuring 3 1/4" long across the
face and this weighs 2 1/4 oz unboxed. Not signed as to the maker, but
few of these were. This is in decent condition and was cleaned. The
brass face plate has some dings and a few small stained spots. The
clear level vial is good. There is some wear and light patina to the
japanning on the body. The machined back has a few small pitted spots.
The screw is original and works. I did not try the face plate screws.
This ain't minty, but these guys got used hard and rarely are. $17.00
http://oldetoolshop.com/forsale/may/level0501a.jpg
http://oldetoolshop.com/forsale/may/level0501b.jpg
http://oldetoolshop.com/forsale/may/level0501c.jpg
Brown & Sharp 6 Inch Combination Square With Starrett Head. This weighs
5 1/4 oz unboxed. This is in reasonably good condition and was
cleaned. The Starrett head has some wear to the finish. The machined
surfaces have some frosting and a couple of small spots of light
pitting, but nothing too bad. The clear level vial is good. The scribe
is a little big for the head, but at least it's present. The locking
screw and tab are good. The Brown & Sharpe tempered rule has some
staining and a little frosting. All the rulings are readable and the
edges and corners are good. This ain't minty, but it will get the job
done. $32.00
http://oldetoolshop.com/forsale/may/machinisttool0502a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0502b.jpg
http://oldetoolshop.com/forsale/may/machinisttool0502c.jpg
http://oldetoolshop.com/forsale/may/machinisttool0502d.jpg
http://oldetoolshop.com/forsale/may/machinisttool0502e.jpg
Patternmaker Founders Fillet Radius Tool. Measuring 6 11/16" long, the
balls are 5/8" and 3/4" in diameter, and this weighs 2 3/4 oz unboxed.
Not signed as to the maker. This is in reasonably good condition and
was cleaned. There ain't much in the way of overall patina. Somebody
partially flattened the side of the 3/4" ball, but not enough to affect
this being used. The 5/8" ball is good. This ain't perfect, but these
guys have been sure hard to come by of late. $14.00
http://oldetoolshop.com/forsale/may/founderstool0501a.jpg
http://oldetoolshop.com/forsale/may/founderstool0501b.jpg
http://oldetoolshop.com/forsale/may/founderstool0501c.jpg
B & S No 80 Flat Jaw Jewelers Pliers. Measuring 5 1/4" long, the jaws
are 1 1/16" deep, 5/16" wide at the tips, and this weighs 3 oz unboxed.
This is in decent condition and was cleaned. There is some frosting and
some wear. A previous owner added some file lines on the side of the
one jaw and on the inside of the one handle. The jaws are good and
close up flush. The cross hatching might have been user done as well.
The through the center joint is good with no play. The one handle is
bent a little. This ain't pristine, but it's an older tool that will
get the job done. $14.00
http://oldetoolshop.com/forsale/may/pliers0501a.jpg
http://oldetoolshop.com/forsale/may/pliers0501b.jpg
http://oldetoolshop.com/forsale/may/pliers0501c.jpg
http://oldetoolshop.com/forsale/may/pliers0501d.jpg
Stanley Yankee No 2101A Bell System 10 Inch Sweep Brace. This weighs 3
lbs 1 3/4 oz unboxed. This is in reasonably good condition and was
cleaned. The plating on the frame is good other than some light
scuffs. The cross hatching on the chuck shell has a little wear and the
plating is worn around the jaw opening. The jaws and springs are good.
The ratchet works in both directions and the locked position. There is
some wear to the plating on the end cap on the chuck. The grip and pad
have some scuffs and wear, but both spin freely. This ain't pristine,
but it sure ain't bad, and it will get the job done. $75.00
http://oldetoolshop.com/forsale/may/brace0502a.jpg
http://oldetoolshop.com/forsale/may/brace0502b.jpg
http://oldetoolshop.com/forsale/may/brace0502c.jpg
http://oldetoolshop.com/forsale/may/brace0502d.jpg
Vintage Hand Vise Or Handvise. Measuring 5 1/16" long, the jaws are 1
7/16" wide, and this weighs 11 oz unboxed. Not signed as to the maker.
This is in reasonably good condition and was cleaned. The machined
areas of the jaws have some frosting and light patina, the rest of the
body was never finished off real pretty like to begin with. The jaws
are fairly good, they close up tight, but not quite flush at the tops
and sides. The cross hatching on the faces is worn, but visible. The
screw is good and travels the full distance. The joint and spring are
good as well. This ain't pristine, but it will get the job done. $30.00
http://oldetoolshop.com/forsale/may/handvise0501a.jpg
http://oldetoolshop.com/forsale/may/handvise0501b.jpg
http://oldetoolshop.com/forsale/may/handvise0501c.jpg
Hand Forged 10 Oz Cross Peen Hammer Head. Measuring 3 11/16" long, the
face is 13/16" in diameter, the peen is 15/16" wide, and this weighs 10
oz unboxed. Not signed as to the maker. This is in reasonably good
condition and was cleaned. There is some overall light patina. The
face has some light dings and wear as does the peen. What the hole is
for on the top of the peen, I have not a clue, maybe somebody was going
to mount a coffee cup holder, eh? The punched eye has a little crusty on
the inside, but nothing too bad. This ain't pristine, but drop it on a
handle and it will get the job done. $17.00
http://oldetoolshop.com/forsale/may/hammer0503a.jpg
http://oldetoolshop.com/forsale/may/hammer0503b.jpg
http://oldetoolshop.com/forsale/may/hammer0503c.jpg
---------------------------------------------
"Fool, fool. You've got to bleed for the dancer"
Heaven & Hell Black Sabbath
Tony
Olde River Hard Goods
http://www.oldetoolshop.com
TSMusic on Facebook
http://www.facebook.com/tonyseomusic
|
