Third run of tools for the month of May. Lots of fresh and great
collectibles as well as some solid user tools.
PayPal is preferred (if you use it) on all items. It's easier for me to
ship items off of a paid PayPal invoice, especially First Class ones.
Checks and money orders are still welcome.
And remember........da more ya buy, the cheaper they fly!
First contact (that is e-mail, or phone) that says I want it gets it.
Prices do not include shipping. All items are shipped with Delivery
Confirmation. Insurance, unless it is a big order or a very fragile item
is optional. Just let me know. Also, I am shipping a lot more stuff via
First Class mail. There will be a small amount added to the shipping
cover the cost of the padded mailer. I don't get them for free.
Please put your name and address in the message. Saves time and email
traffic!
---------------------------------------------------
Voight 1902 Patent Double Claw Hammer Head. This weighs 1 lb 6 1/2 oz
unboxed. George F. Voight of San Francisco, CA was granted Pat. No.
712,983 on Nov. 4, 1902 for the design of this tool. The mark is
partial and faint. This is in reasonably good condition and was
cleaned. The body has some dings and stains, but overall nothing too
bad. There are some scuff marks on the top of the eye from a rehandle
job, now long gone. The face has some dings and a whisker of
mushrooming. The upper claws have some light chipping on the ends and
the lower ones have a little wear, but the insides are good on both.
The 2 head pieces do not come apart, which is why this guy is still
intact. The eyes are good. This ain't minty, but these guys are sure
getting few and far between of late. $125.00
http://oldetoolshop.com/forsale/may/hammer0508a.jpg
http://oldetoolshop.com/forsale/may/hammer0508b.jpg
http://oldetoolshop.com/forsale/may/hammer0508c.jpg
http://oldetoolshop.com/forsale/may/hammer0508d.jpg
Colton Patent 1885 Work Bench Vise. The body is 7 5/16" high, the jaws
are 2 1/4" wide and this weighs 7 lbs 8 1/2 oz unboxed. George A.
Colton of Syracuse, NY was granted Pat. No. 320,224 on June 16, 1885 for
the design of this tool. These were made by several different
companies, but this one does not have a maker's mark that I can see.
This is in decent condition and was cleaned. The finish on the body is
original, but it's worn and there are some areas of light patina and
some bits of paint. The jaws have some chipping and dings on the tops,
but the faces are fairly good. The corners of the anvil are chipped off
and the horn is MIA. The main screw is good and travels the full
distance. That was oiled. The locking screw for the bench top is
missing the cap, but it also travels the full distance and holds. This
ain't minty, but then 120 year old tools rarely are, and these guys sure
are getting hard to come by. $80.00
http://oldetoolshop.com/forsale/may/vise0501a.jpg
http://oldetoolshop.com/forsale/may/vise0501b.jpg
http://oldetoolshop.com/forsale/may/vise0501c.jpg
http://oldetoolshop.com/forsale/may/vise0501d.jpg
http://oldetoolshop.com/forsale/may/vise0501e.jpg
J Stevens A & T Fay Pat Apld For 3 Inch Divider. Measuring 3 1/2" long
(from the tips to the top of the spring) and this weighs 1 oz unboxed.
Charles P. Fay of Chicopee Falls, MA was granted Pat. No. 591,348 on
Oct. 5, 1897, which he applied for on April 6, 1897, and since this one
is marked Pat Apl'd For, well that gives one a pretty good idea of the
age of this tool. The J. Stevens Arms & Tool Co. was a Chicopee Falls,
MA toolmaker who was in business from 1864 until 1903 when they were
acquired by Starrett. This is in decent condition and was cleaned.
There is some overall frosting and light patina on the legs, and a
nicely marked user name on one side. The joint has a little funky on
the inside, but the spring is good. The tips are bent a little. The
quick set nut works and the screw threads were oiled. This ain't minty,
but this a very uncommon tool to say the least. $27.00
http://oldetoolshop.com/forsale/may/machinisttool0514a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0514b.jpg
http://oldetoolshop.com/forsale/may/machinisttool0514c.jpg
H Disston & Sons No 1 12 Inch Metric & English Try Square . The front is
ruled metric, the back English, and this weighs 13 1/2 oz unboxed. This
is in decent condition. A some point somebody powerwashed the blade and
I took off about 20 years of rust on top of that. The blade has some
scuffing on both sides and a few dots of pitting. The metric rulings
are faint and not very readable for the most part. The English rulings
are readable and there also some noticeable scratches on that side. The
edges have a few tiny dings, but are good for the most part and the
corners are good as well. The handle also has some dings and a few bits
of paint down in the grain. This ain't minty, and it sure ain't got
that kind of price tags, but these guys are sure few and very far
between. $30.00
http://oldetoolshop.com/forsale/may/square0504a.jpg
http://oldetoolshop.com/forsale/may/square0504b.jpg
http://oldetoolshop.com/forsale/may/square0504c.jpg
http://oldetoolshop.com/forsale/may/square0504d.jpg
http://oldetoolshop.com/forsale/may/square0504e.jpg
Early Hand Forged Adze Head. Measuring 7 7/8" long, the edge is 2
11/16" wide, and this weighs 1 lb 7 oz unboxed. This is signed with a
touchmark and something stamped below it, but it's nothing that I can
read. This looks to be an early cooper's adze. This is in decent
condition and was cleaned. There is some overall pitting and patina.
The blade area has pitting on both sides, but the edge is beveled on
both sides, so that won't be a problem. The edge has some dings and
will need some work. The hammer face also has some dings and a little
bit of mushrooming. The eye is good with no cracks that I can see. I
did run a file over some dings on the inside at the top, that ain't
perfect, but it's better than it was. This ain't minty, but then tools
of this age rarely are. $30.00
http://oldetoolshop.com/forsale/may/earlyadze0501a.jpg
http://oldetoolshop.com/forsale/may/earlyadze0501b.jpg
http://oldetoolshop.com/forsale/may/earlyadze0501c.jpg
http://oldetoolshop.com/forsale/may/earlyadze0501d.jpg
Early Unplated Beech Wood Bitstock Or Hand Drill TO RESTORE. Measuring
14 3/8" long, the sweep is 7 1/8", and this weighs 1 lb 4 3/4 oz
unboxed. Not signed as to the maker. Unplated, means that this does
not have the brass side reinforcements. This is in AS FOUND condition
and was not cleaned. Overall the body is fairly good, some dings and
stains, but it's solid with no checks or repaired areas. The chuck has
some rusting to the steel liner, but the tab and spring are good, and
the button works. The pad looks to be Lignum Vitae and does have some
checks. That also has an old repair using a big wood screw. The pad
turns, a little slowly in spots, but it does work. This is what it is,
but these guys are sure getting few and far between of late. $40.00
http://oldetoolshop.com/forsale/may/earlybrace0501a.jpg
http://oldetoolshop.com/forsale/may/earlybrace0501b.jpg
http://oldetoolshop.com/forsale/may/earlybrace0501c.jpg
http://oldetoolshop.com/forsale/may/earlybrace0501d.jpg
Vintage Cast Brass Or Bronze Duck Bill Pliers. Measuring 8" long, the
jaws are 2 3/8" deep, 1/2" wide at the tips, and this weighs 7 1/4 oz
unboxed. Not signed as to the maker. This is in good condition and was
not cleaned. They were never finished off real pretty to start with.
The jaws close down to 1/8" and not quite flush looking from the top.
The joint and spring are good. This is what it is, but it is a neat
tool and one that does not show up very often. $18.00
http://oldetoolshop.com/forsale/may/pliers0507a.jpg
http://oldetoolshop.com/forsale/may/pliers0507b.jpg
http://oldetoolshop.com/forsale/may/pliers0507c.jpg
Buck Bros Scraper Plane Blade Burnisher. The blade is 3 13/16" long,
5/16" wide, 1/4" thick, this is 8 3/8" overall, and this weighs 2 1/2 oz
unboxed. The blade mark is faint. This is in reasonably good condition
and was cleaned. The blade has some frosted and stained spots, but
nothing too bad. The edges are good. The handle is original and also
has some staining, but it's solid. This ain't perfect, but these guys
sure have been few and far between of late. $22.00
http://oldetoolshop.com/forsale/may/burnisher0501a.jpg
http://oldetoolshop.com/forsale/may/burnisher0501b.jpg
Small Hand Forged From A File Draw Knife Or Drawknife. Measuring 9"
overall, the blade is 5 5/8" long, 5/8" wide at the one end, 9/16" at
the other, and this weighs 8 3/4 oz unboxed. Not signed as to the
maker. This is in reasonably good condition and was cleaned. The back
has some frosting and a couple of spots of light pitting, but overall
nothing too bad. The front has more of the same. The oak handles have
some dings, stains, and a few bits of paint down in the grain. The left
one wiggles a touch, but the tangs are peened over on the ends, so they
won't come off. This ain't got a fancy name, but it is a working and
collectible tool, and these small ones sure do not show up very often.
$28.00
http://oldetoolshop.com/forsale/may/hfdrawknife0501a.jpg
http://oldetoolshop.com/forsale/may/hfdrawknife0501b.jpg
http://oldetoolshop.com/forsale/may/hfdrawknife0501c.jpg
Vintage Chair Makers Spoke Pointer For A Brace. The bell is 2 1/4" in
diameter, the blade is a hair under 1 3/4" high, and this weighs 9 3/4
oz unboxed. Not signed as to the maker. This is in reasonably good
condition and was cleaned. The bell has some roughness in front of the
mouth, but it looks like that was left over from when this was made.
The rest is good save for a little frosting. The inside of the bell has
some rust staining. The blade has some light frosting and pitting, but
there is plenty there to work with. The screw and tang are good. This
ain't pristine, but it's a solid tool that will get the job done. $28.00
http://oldetoolshop.com/forsale/may/spokepointer0501a.jpg
http://oldetoolshop.com/forsale/may/spokepointer0501b.jpg
http://oldetoolshop.com/forsale/may/spokepointer0501c.jpg
http://oldetoolshop.com/forsale/may/spokepointer0501d.jpg
Small J Gleave & Son Manchester Wood Spokeshave Or Spoke Shave.
Measuring 9 1/4" overall, the blade is 1 1/2" long, 1/4" wide across the
edge, and this weighs 1 1/4 oz unboxed. J Gleave & Son Manchester were
long time plane and tool makers and are still in business as hardware
dealers. This is in good condition and was not cleaned. The body has a
few stains, but has almost all the original finish. The blade is clean
save for a couple of stains, and does remove and holds. The edge is
good. I gotta say that these small ones are sure getting hard to find
in this kind of of shape. $24.00
http://oldetoolshop.com/forsale/may/spokeshave0501a.jpg
http://oldetoolshop.com/forsale/may/spokeshave0501b.jpg
http://oldetoolshop.com/forsale/may/spokeshave0501c.jpg
Stanley V-Logo No 51 Spokeshave Or Spoke Shave. This weighs 11 oz
unboxed. The V-Logo was used on Stanley tools that were made between
1910 and 1920. This is in good condition and was cleaned. the japanning
is original and is 90% plus. The sole and mouth are good. The cap is
also good. The V-Logo blade has a little staining, but nothing too
bad. The edge is slightly convex, but this will need a sharpening
anyways. This ain't pristine, but considering the age of the tool, it
sure ain't bad, and it will get the job done. $30.00
http://oldetoolshop.com/forsale/may/spokeshave0502a.jpg
http://oldetoolshop.com/forsale/may/spokeshave0502b.jpg
http://oldetoolshop.com/forsale/may/spokeshave0502c.jpg
Hjorth Patent 1903 7 Inch Combined Pipe & Nut Wrench. Measuring 7" long
and this weighs 6 1/2 oz unboxed. Arthur W. Hjorth of Jamestown, NY was
granted Pat. No. 738,444 on Sept. 8, 1903 for the design of this tool.
This is in decent condition and was cleaned. There are some spots of
light pitting and somebody filed some notches along the top of the
head. The jaw teeth have a little wear. The wire cutter is cracked,
but the joint is fairly good with just a little play. The tack claws on
the end of the one handle are also good. This ain't pristine, but this
is not a commonly found size for this tool. $15.00
http://oldetoolshop.com/forsale/may/wrench0501a.jpg
http://oldetoolshop.com/forsale/may/wrench0501b.jpg
http://oldetoolshop.com/forsale/may/wrench0501c.jpg
http://oldetoolshop.com/forsale/may/wrench0501d.jpg
C E Jennings 3/8 Inch Bench Gouge. Measuring 8 1/4" from the edge to
the end of the socket, the blade is 6 3/16" long, 3/8" wide across the
inside of the sweep, this is 12 9/16" overall, and this weighs 4 1/2 oz
unboxed. This is in reasonably good condition and was cleaned. The
inside of the sweep is good other than some frosting and a few tiny
dots. The back has some light roughness, but nothing too bad if you
wanted to flip the bevel. The edge is good. The socket is good save
for the start of some mushrooming. The handle is a replacement. That
has some stains, but it's solid. This ain't minty, but it is a quality
tool that will get the job done. $18.00
http://oldetoolshop.com/forsale/may/chisel0505a.jpg
http://oldetoolshop.com/forsale/may/chisel0505b.jpg
Belknap Pine Knot 1/2 Inch Bevel Side Chisel. Measuring 7 15/16" from
the edge to the end of the socket, the blade is 5 3/4" long, this is 12
5/16" overall, and this weighs 4 3/4 oz unboxed. Pine Knot (or Knott)
was a brand name used by the Belknap Hardware & Mfg Co of Louisville
KY. This is in decent condition and was cleaned. The back has overall
frosting and light pitting and there are a few deeper spots. The top
also has some noticeable patina. The socket had some mushrooming removed
(not by me). The handle is a good replacement. I did not have that off
of the tool. Pretty and perfect moved out of town on this guy a while
back, but I sure ain't seen too many tools by this maker around. $15.00
http://oldetoolshop.com/forsale/may/chisel0506a.jpg
http://oldetoolshop.com/forsale/may/chisel0506b.jpg
SIX Brookstone Carving Tools. Left to right there is a 5/16" straight
chisel, a 5/16" bent chisel, a 5/16" skew chisel, a 1/8" and a 1/4"
gouge, a 1/8" V-gouge, and they weigh 6 oz unboxed. These are in good
condition and were lightly cleaned. The blades and shafts are all good
save for a few stained spots. The edge on the skew chisel has a small
chip, and the rest could stand a touch up. The handles have some dings
to the finish, but are solid. These ain't pristine, but they will get
the job done. $25.00
http://oldetoolshop.com/forsale/may/carvingtoolset0501a.jpg
http://oldetoolshop.com/forsale/may/carvingtoolset0501b.jpg
http://oldetoolshop.com/forsale/may/carvingtoolset0501c.jpg
http://oldetoolshop.com/forsale/may/carvingtoolset0501d.jpg
W Butcher Cast Steel 1 3/16 Inch Gouge. Measuring 6" from the edge to
the top of the handle, the blade is 4 1/8" long, 1 3/16" wide across the
inside of the sweep, 1 5/16" across the outside, this is 12 1/8"
overall, and this weighs 8 1/4 oz unboxed. This is in reasonably good
condition and was cleaned. The inside of the sweep has some staining
and frosting, but nothing too bad. The back is the same with a few
light scuffs. The edge will need some work. The handle has some stains,
but it's solid. This ain't pristine, but it sure ain't bad, and these
bigger ones are sure get hard to come by, at least in this kind of
shape. $22.00
http://oldetoolshop.com/forsale/may/chisel0504a.jpg
http://oldetoolshop.com/forsale/may/chisel0504b.jpg
http://oldetoolshop.com/forsale/may/chisel0504c.jpg
Vintage 10 Inch Adjustable Bevel Square. The blade is 9 1/2" long, the
handle is 5 13/16" high, and this weighs 4 1/4 oz unboxed. Not signed
as to the maker. This is in reasonably good condition and was cleaned
by someone else. He also likes the shiny stuff. The blade has some
stains, but nothing too bad patina wise. The edges and corners are
good. The rosewood handle has some light dings and a few bits of paint
down in the grain, but it also is good. The locking screw works. This
ain't gotta fancy name, but it is a quality older tool that will get the
job done. $19.00
http://oldetoolshop.com/forsale/may/square0505a.jpg
http://oldetoolshop.com/forsale/may/square0505b.jpg
http://oldetoolshop.com/forsale/may/square0505c.jpg
http://oldetoolshop.com/forsale/may/square0505d.jpg
L S Starrett No 75 6 Inch Fay Pattern Outside Caliper. Measuring 6
15/16" long and this weighs 3 1/2 oz unboxed. This is in very good
condition and was not cleaned. I doubt that it was used or much at
all. There ain't nothing patina wise at all. The spring, joint, and
tips are all good and the quick set nut works just fine. This is a top
quality tool in the right condition. $25.00
http://oldetoolshop.com/forsale/may/machinisttool0510a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0510b.jpg
http://oldetoolshop.com/forsale/may/machinisttool0510c.jpg
Lufkin No 188 Jewelers Screwdriver. The handle is 3" long, the tip is
3/32" wide, and this weighs 1/2 oz unboxed. This is in reasonably good
condition and was not cleaned. There is a little patina, but nothing
too bad. The tip has a little wear. The chuck works and the top spins
freely. This ain't perfect, but it is a quality tool that will get the
job done. $14.00
http://oldetoolshop.com/forsale/may/machinisttool0508a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0508b.jpg
Vintage Stanley No 40 Pocket Level. Measuring 3 1/4" long across the
face and this weighs 2 1/4 oz unboxed. Not signed as to the maker, but
few of these were. This is in decent condition and was cleaned. The
brass face plate has some dings and a few small stained spots. The
clear level vial is good. There is some wear and light patina to the
japanning on the body. The machined back has a few small pitted spots.
The screw is original and works. I did not try the face plate screws.
This ain't minty, but these guys got used hard and rarely are. $17.00
http://oldetoolshop.com/forsale/may/level0501a.jpg
http://oldetoolshop.com/forsale/may/level0501b.jpg
http://oldetoolshop.com/forsale/may/level0501c.jpg
Brown & Sharp 6 Inch Combination Square With Starrett Head. This weighs
5 1/4 oz unboxed. This is in reasonably good condition and was
cleaned. The Starrett head has some wear to the finish. The machined
surfaces have some frosting and a couple of small spots of light
pitting, but nothing too bad. The clear level vial is good. The scribe
is a little big for the head, but at least it's present. The locking
screw and tab are good. The Brown & Sharpe tempered rule has some
staining and a little frosting. All the rulings are readable and the
edges and corners are good. This ain't minty, but it will get the job
done. $32.00
http://oldetoolshop.com/forsale/may/machinisttool0502a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0502b.jpg
http://oldetoolshop.com/forsale/may/machinisttool0502c.jpg
http://oldetoolshop.com/forsale/may/machinisttool0502d.jpg
http://oldetoolshop.com/forsale/may/machinisttool0502e.jpg
Grosser 7 1/2 Inch Needle Straightening Pliers. Measuring 7 1/2" long,
the jaws are 1 15/16" deep, 3/16" wide at the tips, and this weighs 4
3/4 oz unboxed. The Grosser Knitting Machine Company was a New York
based supplier of such goods and tools related to the trade. This is in
decent condition and was cleaned. There are some scuffs, stains, and a
little frosting. The jaws are good on the insides, and close up tight
and flush. The through the center style joint is also good with no
play. This ain't minty, but it will get the job done. $16.00
http://oldetoolshop.com/forsale/may/pliers0502a.jpg
http://oldetoolshop.com/forsale/may/pliers0502b.jpg
http://oldetoolshop.com/forsale/may/pliers0502c.jpg
Patternmaker Founders Fillet Radius Tool. Measuring 6 11/16" long, the
balls are 5/8" and 3/4" in diameter, and this weighs 2 3/4 oz unboxed.
Not signed as to the maker. This is in reasonably good condition and
was cleaned. There ain't much in the way of overall patina. Somebody
partially flattened the side of the 3/4" ball, but not enough to affect
this being used. The 5/8" ball is good. This ain't perfect, but these
guys have been sure hard to come by of late. $14.00
http://oldetoolshop.com/forsale/may/founderstool0501a.jpg
http://oldetoolshop.com/forsale/may/founderstool0501b.jpg
http://oldetoolshop.com/forsale/may/founderstool0501c.jpg
B & S No 80 Flat Jaw Jewelers Pliers. Measuring 5 1/4" long, the jaws
are 1 1/16" deep, 5/16" wide at the tips, and this weighs 3 oz unboxed.
This is in decent condition and was cleaned. There is some frosting and
some wear. A previous owner added some file lines on the side of the
one jaw and on the inside of the one handle. The jaws are good and
close up flush. The cross hatching might have been user done as well.
The through the center joint is good with no play. The one handle is
bent a little. This ain't pristine, but it's an older tool that will
get the job done. $14.00
http://oldetoolshop.com/forsale/may/pliers0501a.jpg
http://oldetoolshop.com/forsale/may/pliers0501b.jpg
http://oldetoolshop.com/forsale/may/pliers0501c.jpg
http://oldetoolshop.com/forsale/may/pliers0501d.jpg
Stanley Yankee No 2101A Bell System 10 Inch Sweep Brace. This weighs 3
lbs 1 3/4 oz unboxed. This is in reasonably good condition and was
cleaned. The plating on the frame is good other than some light
scuffs. The cross hatching on the chuck shell has a little wear and the
plating is worn around the jaw opening. The jaws and springs are good.
The ratchet works in both directions and the locked position. There is
some wear to the plating on the end cap on the chuck. The grip and pad
have some scuffs and wear, but both spin freely. This ain't pristine,
but it sure ain't bad, and it will get the job done. $75.00
http://oldetoolshop.com/forsale/may/brace0502a.jpg
http://oldetoolshop.com/forsale/may/brace0502b.jpg
http://oldetoolshop.com/forsale/may/brace0502c.jpg
http://oldetoolshop.com/forsale/may/brace0502d.jpg
Vintage Hand Vise Or Handvise. Measuring 5 1/16" long, the jaws are 1
7/16" wide, and this weighs 11 oz unboxed. Not signed as to the maker.
This is in reasonably good condition and was cleaned. The machined
areas of the jaws have some frosting and light patina, the rest of the
body was never finished off real pretty like to begin with. The jaws
are fairly good, they close up tight, but not quite flush at the tops
and sides. The cross hatching on the faces is worn, but visible. The
screw is good and travels the full distance. The joint and spring are
good as well. This ain't pristine, but it will get the job done. $30.00
http://oldetoolshop.com/forsale/may/handvise0501a.jpg
http://oldetoolshop.com/forsale/may/handvise0501b.jpg
http://oldetoolshop.com/forsale/may/handvise0501c.jpg
L S Starrett No 27 4 Inch Firm Joint Inside Caliper. Measuring 4 5/16"
long and this weighs 1 1/4 oz unboxed. This is in reasonably good
condition and was cleaned. There are some scuffs and a few spots of
light pitting. The joint is good and holds position. The tips are also
good save for some light patina. This ain't pristine, but it will get
the job done. $14.00
http://oldetoolshop.com/forsale/may/machinisttool0504a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0504b.jpg
http://oldetoolshop.com/forsale/may/machinisttool0504c.jpg
Hand Forged 10 Oz Cross Peen Hammer Head. Measuring 3 11/16" long, the
face is 13/16" in diameter, the peen is 15/16" wide, and this weighs 10
oz unboxed. Not signed as to the maker. This is in reasonably good
condition and was cleaned. There is some overall light patina. The
face has some light dings and wear as does the peen. What the hole is
for on the top of the peen, I have not a clue, maybe somebody was going
to mount a coffee cup holder, eh? The punched eye has a little crusty on
the inside, but nothing too bad. This ain't pristine, but drop it on a
handle and it will get the job done. $17.00
http://oldetoolshop.com/forsale/may/hammer0503a.jpg
http://oldetoolshop.com/forsale/may/hammer0503b.jpg
http://oldetoolshop.com/forsale/may/hammer0503c.jpg
Vintage Cast Iron Bed Key Or Wrench. Measuring 6 11/16" long and this
weighs 10 3/4 oz unboxed. Not signed as to the maker. This is in
reasonably good condition and was cleaned. There ain't much in the way
of overall patina, but these guys were never finished off real pretty to
start with. All of the wrench sockets have a little wear on the insides
and some light funky, but all are good with no cracks that I can see. I
gotta say, that these guys have sure been few and far between of late.
$24.00
http://oldetoolshop.com/forsale/april/bedwrench0401a.jpg
http://oldetoolshop.com/forsale/april/bedwrench0401b.jpg
http://oldetoolshop.com/forsale/april/bedwrench0401c.jpg
Early Hand Forged Claw Hammer. Measuring 13" overall, the head is 5
13/16" long, the face is 1 1/4" square, the claws are 1 1/2" wide at the
tips, and this weighs 1 lb 14 3/4 oz unboxed. Not signed as to the
maker. This has a steel face on a wrought iron body. This is in fair
condition, it was cleaned, and it wasn't the first time either. There
is some overall pitting, patina, and some scuff marks from the first
time this was done. The face had some mushrooming removed and was
dressed. There are some small checks around the rim and some small
chips at the top. The claws were dressed on both the tops and
undersides (again, not by me!) The eye looks to be good with no cracks
that I can see. The handle is an older replacement and is good. This
ain't minty, but then tools of this age rarely are. $17.00
http://oldetoolshop.com/forsale/april/earlyhammer0401a.jpg
http://oldetoolshop.com/forsale/april/earlyhammer0401b.jpg
http://oldetoolshop.com/forsale/april/earlyhammer0401c.jpg
http://oldetoolshop.com/forsale/april/earlyhammer0401d.jpg
Sandusky Tool 2 3/8 Inch Bench Plane Iron & Cap. Measuring 8 1/16"
long, the edge is 2 3/8" wide, and this weighs 15 1/2 oz unboxed. This
is in good condition and was cleaned. The working face is clean save
for some very light scuffs and stains and there is lots there to work
with. The edge is slightly convex, but will need a touch up. The
exposed areas are good and the back has some stains and light patina.
The cap iron has some light stains on the front. The back was never
finished off real pretty to start with. The screw works. I gotta say
that these guys sure do not show up in this kind of condition much at
all any more. $25.00
http://oldetoolshop.com/forsale/april/planeiron0401a.jpg
http://oldetoolshop.com/forsale/april/planeiron0401b.jpg
http://oldetoolshop.com/forsale/april/planeiron0401c.jpg
http://oldetoolshop.com/forsale/april/planeiron0401d.jpg
Craftsman No 9-4026 Combination Tool. Measuring 5 3/4" long and this
weighs 1 oz unboxed. This has a 1937 Copyright date. This is a
protractor, drill point gage, square, and center finder, all rolled into
one tool. This is in reasonably good condition and was not cleaned.
There are some light scuffs and a couple of stains, but overall nothing
too bad. All the rulings and tables are readable. The edges are good
and the arm is also good and holds position. This is a handy tool that
will get the job done. $17.00
http://oldetoolshop.com/forsale/april/machinisttool0414a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0414b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0414c.jpg
http://oldetoolshop.com/forsale/april/machinisttool0414d.jpg
Millen Mfg Co JIFFY TITE 1929 Patent Screwdriver. Measuring 8 3/8"
long, the tip is 3/16" wide, and this weighs 2 oz unboxed. Edward L.
Millen of Brookline, MA was granted Pat. No. 1,699,306 on Jan. 15, 1929
for the design of this tool. This is in reasonably good condition and
was cleaned. There is a little patina on the head and shaft. The tip
is good and still has most of the original lines. The spring is good and
the gripper works. The handle looks to be Bakelite and is good. I
gotta say, that these guys are sure getting hard to come by in this kind
of shape. $18.00
http://oldetoolshop.com/forsale/april/screwdriver0403a.jpg
http://oldetoolshop.com/forsale/april/screwdriver0403b.jpg
http://oldetoolshop.com/forsale/april/screwdriver0403c.jpg
Early Hand Forged Denglestock PA Dutch Scythe Sharpening Anvil.
Measuring 8 1/4" long, the face is 1 1/16" wide, and this weighs 1 lb 3
1/2 oz unboxed. Not signed as to the maker. This is in decent
condition and was cleaned. This does have a steel face set into the
wrought iron body and that is some right hard steel. There is the usual
overall patina found on these kind of tools. The face has some dots of
pitting and a small chip off the one end. The spike has a wee bit of
mushrooming and will need a dressing. This ain't perfect, but these
guys rarely show up in that kind of shape. $25.00
http://oldetoolshop.com/forsale/april/denglestock0401a.jpg
http://oldetoolshop.com/forsale/april/denglestock0401b.jpg
http://oldetoolshop.com/forsale/april/denglestock0401c.jpg
Brown & Sharpe No 835 4 Inch Firm Joint Hermaphrodite Caliper. Measuring
4 1/4" long and this weighs 1 oz unboxed. This is in good condition and
was not cleaned. Other than some light shop patina, there ain't much to
fuss about with this guy. The joint is good and holds position. The
points are good and the screw works. This ain't minty, but it will get
the job done. $15.00
http://oldetoolshop.com/forsale/april/machinisttool0411a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0411b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0411c.jpg
P S & W No 3003 8 Inch Sweep Brace. This weighs 2 lbs 9 3/4 oz
unboxed. This is in reasonably good condition and was cleaned. There is
some frosting and a few spots of light pitting. The chuck and jaws are
good and the ratchet works in both directions and the locked position.
The grip and pad are good, the pad does have a couple of tiny bits of
paint down in the grain, but both spin freely. This ain't minty, but it
is a quality tool that will get the job done. $25.00
http://oldetoolshop.com/forsale/april/brace0401a.jpg
http://oldetoolshop.com/forsale/april/brace0401b.jpg
http://oldetoolshop.com/forsale/april/brace0401c.jpg
http://oldetoolshop.com/forsale/april/brace0401d.jpg
Early Hand Forged From File 1 Inch Firmer Chisel. Measuring 6 11/16"
from the edge to the top of the handle, the blade is 4 1/16" long, 1"
wide at the edge and it tapers down to 13/16", this is 12 3/4" overall,
and this weighs 10 1/4 oz unboxed. Not signed as to the maker. This is
in decent condition and was cleaned. The back has some scuffs and a
little frosting, but overall nothing too bad. The edge will need a touch
up. The top has some light patina and some of the file teeth are
visible. The handle has some stains, but it's solid. This ain't got a
fancy name, but it's a solid and well made tool that will get the job
done. $20.00
http://oldetoolshop.com/forsale/april/earlychisel0401a.jpg
http://oldetoolshop.com/forsale/april/earlychisel0401b.jpg
http://oldetoolshop.com/forsale/april/earlychisel0401c.jpg
L S Starrett No 38 10 Inch Lock Joint Outside Caliper. Measuring 10
3/8" long (from the tips to the top of the joint) and this weighs 8 1/2
oz unboxed. This is in decent condition and was cleaned. There is some
frosting and staining overall, and there are user initials stamped on
both sides. The joint is good and the locking screw works. The fine
adjuster works and the tips are good. This ain't minty, but it will get
the job done. $24.00
http://oldetoolshop.com/forsale/april/machinisttool0407a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0407b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0407c.jpg
L S Starrett No 41 8 Inch Firm Joint Hermaphrodite Caliper. Measuring 8
1/16" long and this weighs 3 3/4 oz unboxed. This is in decent
condition and was cleaned. There is some overall frosting and light
patina. The joint is a little stiff, but it does reverse and holds
position. The caliper tip has some dings. The moveable point screw
works. This ain't the prettiest, but it will get the job done. $14.00
http://oldetoolshop.com/forsale/april/machinisttool0409a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0409b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0409c.jpg
Brown & Sharpe 12 Inch 3 Piece Machinist Combination Square. This weighs
1 lb 1/4 oz unboxed. This is in decent condition and was cleaned. Both
heads are hardened and have some dings and wear to the finish. The
vertical and mitre surfaces of the square head have some staining, but
nothing too bad. There is is very light pitting on the small section in
between. The clear level vial is good and the scribe is present. The
center head also has some staining on the inside. Both locking screws
and tabs are good. The tempered rule has some frosting, stains, and
some spots of light pitting. All the rulings are readable and the edges
are good, but there is a little wear on the tops of the corners. This
ain't minty, but it is a quality tool that will get the job done. $50.00
http://oldetoolshop.com/forsale/april/machinisttool0410a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0410b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0410c.jpg
http://oldetoolshop.com/forsale/april/machinisttool0410d.jpg
http://oldetoolshop.com/forsale/april/machinisttool0410e.jpg
http://oldetoolshop.com/forsale/april/machinisttool0410f.jpg
FOUR Ramelson USA Small Carving Tools. There is a 5/16" skew chisel, a
3/8" bent chisel, a 1/16" (across the inside of the sweep) straight
gouge, a 1/8" bent V-gouge, and they weigh 3 1/2 oz unboxed. These are
in good condition and were cleaned. The skew chisel does have some
light pitting, but the rest are good. The handles all are good and have
all of the original finish. These are quality tools that will get the
job done. $30.00
http://oldetoolshop.com/forsale/april/carvingtoolset0401a.jpg
http://oldetoolshop.com/forsale/april/carvingtoolset0401b.jpg
http://oldetoolshop.com/forsale/april/carvingtoolset0401c.jpg
http://oldetoolshop.com/forsale/april/carvingtoolset0401d.jpg
Vintage Lancashire Pattern 5 Inch Outside Caliper. Measuring 5 3/16"
long and this weighs 2 1/4 oz unboxed. Not signed as to the maker.
This is in reasonably good condition and was cleaned. There is a little
frosting, but overall nothing too bad. The spring is good. The tips
were dressed at some point and only close down to 5/16". The nut
travels the full distance. This ain't pristine, but it will get the job
done. A working and collectible old layout tool for sure! $14.00
http://oldetoolshop.com/forsale/april/earlydivider0402a.jpg
http://oldetoolshop.com/forsale/april/earlydivider0402b.jpg
http://oldetoolshop.com/forsale/april/earlydivider0402c.jpg
Millers Falls Machinist 8 Inch Outside Caliper. Measuring 9 1/16" long
and this weighs 5 1/4 oz unboxed. This is in reasonably good condition
and was cleaned. The legs have some stained and frosted spots, and M
made his mark on both sides, but overall there is nothing too bad patina
wise. The spring originally had a spinner on the top, but that is MIA,
and that and the tips are good. The nut travels the full distance.
This ain't pristine, but it will get the job done. $17.00
http://oldetoolshop.com/forsale/april/machinisttool0403a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0403b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0403c.jpg
Products Engineering No 402-012 12 Inch Machinist Rule. This weighs 2
1/4 oz unboxed. This is in reasonably good condition and was not
cleaned. There are some light scuffs and stains, but overall nothing
too bad. The edges and corners are good and all the rulings are
readable. This ain't perfect, but it will get the job done. $16.00
http://oldetoolshop.com/forsale/april/machinisttool0404a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0404b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0404c.jpg
C S Osborne No 29 Circle Compass. Measuring 5 3/8" long and this
weighs 2 1/2 oz unboxed. This is in reasonably good condition and was
cleaned. The legs are good other than a little frosting. The wing has
some dots of light pitting. The 3 finger (2 + 1) joint is good and the
locking screw works. The point is good and the cutter tip feels sharp
to the touch on both sides. This ain't minty, but it sure ain't bad,
and these guys have sure been few and far between of late. $75.00
http://oldetoolshop.com/forsale/april/leathertool0402a.jpg
http://oldetoolshop.com/forsale/april/leathertool0402b.jpg
http://oldetoolshop.com/forsale/april/leathertool0402c.jpg
http://oldetoolshop.com/forsale/april/leathertool0402d.jpg
Stanley Handyman No 1500 6 Inch Pliers. Measuring 6 3/8" long and this
weighs 5 1/2 oz unboxed. This is in good condition and was lightly
cleaned. I got rid of some oil stains around the joint and the
obligatory paint splats. The plating is good save for some light scuffs
and stains. The jaws and slip joint are good. This ain't minty, but
it's pretty darn close. $15.00
http://oldetoolshop.com/forsale/april/pliers0401a.jpg
http://oldetoolshop.com/forsale/april/pliers0401b.jpg
http://oldetoolshop.com/forsale/april/pliers0401c.jpg
North Bros Yankee No 3030 Countersink Bit. This weighs 1/2 oz unboxed.
This will fit the Nos. 30 and 130 push screwdrivers along with the A
models as well. This is in condition and was not cleaned. There is a
little staining on the head, but the edge is good. I don't think that
this one got used much if at all. The shaft is also good save for a few
very light dings to the finish. These guys are sure getting hard to come
by, at least around these here parts. $17.00
http://oldetoolshop.com/forsale/april/yankee0401a.jpg
http://oldetoolshop.com/forsale/april/yankee0401b.jpg
Vintage Mahogany Oval Head Marking Gage Or Gauge. The beam is 9 1/16"
long and this weighs 3 oz unboxed. Not signed as to the maker. This is
in reasonably good condition and was cleaned. The beam is good other
than some grain checks on the back side by the point and all the rulings
are readable. The point is good. The head is also good with not much
in the way of wear and the locking screw works. This ain't gotta fancy
name, but it's a good looking older tool that will get the job done. $14.00
http://oldetoolshop.com/forsale/april/markinggage0401a.jpg
http://oldetoolshop.com/forsale/april/markinggage0401b.jpg
http://oldetoolshop.com/forsale/april/markinggage0401c.jpg
http://oldetoolshop.com/forsale/april/markinggage0401d.jpg
Vintage No 3 Rivet Set or Setter. Measuring 4 1/16" long, the post hole
is 3/16" in diameter, the dimple is 1/4", and this weighs 6 1/4 oz
unboxed. Not signed as to the maker. This is in decent condition and
was cleaned. There is some overall light patina. The face has some
very light pitting and a scratch on the one side of the dimple, but both
that and the post hole are good. The handle has some dings on both
sides. The striking end had some mushrooming removed and there are a
few voids on the corners, but it's good to go. This ain't the
prettiest, but it's a solid tool that will get the job done. $14.00
http://oldetoolshop.com/forsale/april/rivetset0401a.jpg
http://oldetoolshop.com/forsale/april/rivetset0401b.jpg
http://oldetoolshop.com/forsale/april/rivetset0401c.jpg
Jennings & Griffith No 6 1/2 Inch Paring Bevel Side Chisel. Measuring 7
9/16" from the edge to the end of the socket, the blade is 5 1/4" long,
this is 11 11/16" overall, and this weighs 5 oz unboxed. This is in
decent condition and was cleaned. The back has some frosting, staining,
and few tiny dots of pitting, but overall nothing too bad. The top also
has some patina going. The socket has some light pitting. The handle
looks to be the original one. That has some stains and dings, but it's
solid. I did not have it off of the tool. This ain't pristine, but it
will get the job done. $17.00
http://oldetoolshop.com/forsale/mar/chisel0307a.jpg
http://oldetoolshop.com/forsale/mar/chisel0307b.jpg
THREE Lufkin Patternmakers Shirk Rules. Left to right in the first
picture there is a C-83G, 1/4" to 1 ft, a C-83F, 3/16" to 1 ft, a C-83K,
3/8" to 1 ft, and they weigh 6 1/2 oz unboxed. These are in reasonably
good condition and were lightly cleaned. There are some scuffs and
overall light wear, but nothing too bad. There are user initials deeply
stamped on the back of the one. All the rulings are readable. The
edges are good, but a few of the corners have some very light wear.
These ain't pristine, but they are quality tools that will get the job
done. $35.00
http://oldetoolshop.com/forsale/april/shrinkrule0401a.jpg
http://oldetoolshop.com/forsale/april/shrinkrule0401b.jpg
http://oldetoolshop.com/forsale/april/shrinkrule0401c.jpg
http://oldetoolshop.com/forsale/april/shrinkrule0401d.jpg
http://oldetoolshop.com/forsale/april/shrinkrule0401e.jpg
TWO Brown & Sharpe 4 Inch Machinist Calipers. They measure 4 5/16" high
and they weigh 2 oz unboxed. These are in reasonably good condition and
were cleaned. Both have the same M user mark in a few places. The
inside caliper does have some small pitted spots on the back of the
legs, but the fronts are good as is the outside one. Both joints are
good, the inside is a wee bit stiff, but it works. The tips are good as
well. These ain't perfect, but they are quality tools that will get the
job done. $24.00
http://oldetoolshop.com/forsale/mar/machinisttool0316a.jpg
http://oldetoolshop.com/forsale/mar/machinisttool0316b.jpg
http://oldetoolshop.com/forsale/mar/machinisttool0316c.jpg
TWO Vintage General No 520 Trammel Points & Box. There are the trammel
points, the pencil tip, an assortment of replacement steel tips, and
this all weighs 7 oz unboxed. These are in reasonably good condition
and were not cleaned. There is some wear to the finish on the heads,
but most of it is there. All of the screws work and the points remove.
The box has some staining and wear and there is a rip on the label side
of the lid, but overall it's solid. These ain't pristine, but they are
one of General's better products, and they will get the job done. $34.00
http://oldetoolshop.com/forsale/mar/trammelpoints0301a.jpg
http://oldetoolshop.com/forsale/mar/trammelpoints0301b.jpg
http://oldetoolshop.com/forsale/mar/trammelpoints0301c.jpg
http://oldetoolshop.com/forsale/mar/trammelpoints0301d.jpg
---------------------------------------------
"Any man can learn anything he will, but no man can teach except to
those who want to learn."
Henry Ford
Tony
Olde River Hard Goods
http://www.oldetoolshop.com
TSMusic on Facebook
http://www.facebook.com/tonyseomusic
|
