Second list of the goods for the month of May. There are a number of
fresh working and collectible tools this time around. It looks like the
weather has turned the corner here finally, save for the rain...sigh.
PayPal is preferred (if you use it) on all items. It's easier for me to
ship items off of a paid PayPal invoice, especially First Class ones.
Checks and money orders are still welcome.
And remember........da more ya buy, the cheaper they fly!
First contact (that is e-mail, or phone) that says I want it gets it.
Prices do not include shipping. All items are shipped with Delivery
Confirmation. Insurance, unless it is a big order or a very fragile item
is optional. Just let me know. Also, I am shipping a lot more stuff via
First Class mail. There will be a small amount added to the shipping
cover the cost of the padded mailer. I don't get them for free.
Please put your name and address in the message. Saves time and email
traffic!
---------------------------------------------------
L S Starrett No 83 4 Inch Yankee Pattern Divider. Measuring 4 11/16"
long (from the tips to the top of the spring) and this weighs 1 3/4 oz
unboxed. This is in very good condition and was not cleaned. I doubt
that it was used much. There ain't nothing much patina wise to fuss
about. The spring and joint are good. The tips have a little
discoloration from riding in the plastic cover, but are nice and
pointy. The quick set nut works just dandy. This is about as close to
minty as you will get without buying a new one. $25.00
http://oldetoolshop.com/forsale/may/machinisttool0509a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0509b.jpg
http://oldetoolshop.com/forsale/may/machinisttool0509c.jpg
L S Starrett No 75 6 Inch Fay Pattern Outside Caliper. Measuring 6
15/16" long and this weighs 3 1/2 oz unboxed. This is in very good
condition and was not cleaned. I doubt that it was used or much at
all. There ain't nothing patina wise at all. The spring, joint, and
tips are all good and the quick set nut works just fine. This is a top
quality tool in the right condition. $25.00
http://oldetoolshop.com/forsale/may/machinisttool0510a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0510b.jpg
http://oldetoolshop.com/forsale/may/machinisttool0510c.jpg
Vintage Small Perfect Handle Screwdriver. Measuring 4 7/8" long, the
tip is 1/4" wide, and this weighs 1 3/4 oz unboxed. This is in decent
condition and was cleaned. The tip has a little chipping and some light
pitting, but was never messed with. The shaft has some pliers marks.
The handle scales are good and are on tight. There is a whisker of
mushrooming on the end. This ain't minty, but these guys rarely are.
$17.00
http://oldetoolshop.com/forsale/may/phsd0501a.jpg
http://oldetoolshop.com/forsale/may/phsd0501b.jpg
Vintage No TL251 Typewriter Pliers. Measuring 5 3/16" long and this
weighs 6 3/4 oz unboxed. Not signed as to the maker. This is in
reasonably good condition and was cleaned. There is some pitting on the
ends of the jaws. The two moveable jaws are good other than some light
patina. The joint is good as well and was oiled. I can't say exactly
what this was used for, but it will get the job done. $24.00
http://oldetoolshop.com/forsale/may/pliers0506a.jpg
http://oldetoolshop.com/forsale/may/pliers0506b.jpg
http://oldetoolshop.com/forsale/may/pliers0506c.jpg
Hand Forged Patent Date Stamp. Measuring 3 5/16" long, the mark is 1
1/4" wide, the figures are 3/32" high, and this weighs 5 3/4 oz
unboxed. Not signed as to the maker, there is what looks to be a touch
mark on the striking end. There are 12 tool related patents that were
issued on Oct. 21, 1873, but it's probably for some thing else. This is
in reasonably good condition and was cleaned by someone else who also
hit it with the shiny stuff. The figures are good and clear. The
striking end has the start of a little mushrooming, but is also good. I
gotta say, these guys are sure hard to come by. $25.00
http://oldetoolshop.com/forsale/may/hfstamp0501a.jpg
http://oldetoolshop.com/forsale/may/hfstamp0501b.jpg
Early Hand Forged Coopers Adze Head. Measuring 9 5/8" long, 2 3/16"
wide across the edge, and this weighs 2 lbs 13 1/4 oz unboxed. Not
signed as to the maker. This is in fair condition and was cleaned.
There is a whole lot of patina going on this guy. The face has some
dings, a chip on the one side, and the start of some mushrooming. The
edge area is pitted and there are some chips off of the side. The eye
has some crusty on the inside and some small chips on the underside, but
it's solid. This sure ain't pretty or perfect, but these guys sure
ain't been showing up much of late. $24.00
http://oldetoolshop.com/forsale/may/earlycooperstool0501a.jpg
http://oldetoolshop.com/forsale/may/earlycooperstool0501b.jpg
http://oldetoolshop.com/forsale/may/earlycooperstool0501c.jpg
1911 Metal Work And Etching Popular Mechanics Book. 88 pages and this
weighs 8 oz unboxed. This is in reasonably good condition. The cover
has some stains and light wear. All the pages are present and clean.
This is a good and well written book to say the least. $20.00
http://oldetoolshop.com/forsale/may/book0501a.jpg
http://oldetoolshop.com/forsale/may/book0501b.jpg
http://oldetoolshop.com/forsale/may/book0501c.jpg
http://oldetoolshop.com/forsale/may/book0501d.jpg
http://oldetoolshop.com/forsale/may/book0501e.jpg
Lufkin No 188 Jewelers Screwdriver. The handle is 3" long, the tip is
3/32" wide, and this weighs 1/2 oz unboxed. This is in reasonably good
condition and was not cleaned. There is a little patina, but nothing
too bad. The tip has a little wear. The chuck works and the top spins
freely. This ain't perfect, but it is a quality tool that will get the
job done. $14.00
http://oldetoolshop.com/forsale/may/machinisttool0508a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0508b.jpg
Vintage Stanley No 40 Pocket Level. Measuring 3 1/4" long across the
face and this weighs 2 1/4 oz unboxed. Not signed as to the maker, but
few of these were. This is in decent condition and was cleaned. The
brass face plate has some dings and a few small stained spots. The
clear level vial is good. There is some wear and light patina to the
japanning on the body. The machined back has a few small pitted spots.
The screw is original and works. I did not try the face plate screws.
This ain't minty, but these guys got used hard and rarely are. $17.00
http://oldetoolshop.com/forsale/may/level0501a.jpg
http://oldetoolshop.com/forsale/may/level0501b.jpg
http://oldetoolshop.com/forsale/may/level0501c.jpg
Brown & Sharp 6 Inch Combination Square With Starrett Head. This weighs
5 1/4 oz unboxed. This is in reasonably good condition and was
cleaned. The Starrett head has some wear to the finish. The machined
surfaces have some frosting and a couple of small spots of light
pitting, but nothing too bad. The clear level vial is good. The scribe
is a little big for the head, but at least it's present. The locking
screw and tab are good. The Brown & Sharpe tempered rule has some
staining and a little frosting. All the rulings are readable and the
edges and corners are good. This ain't minty, but it will get the job
done. $32.00
http://oldetoolshop.com/forsale/may/machinisttool0502a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0502b.jpg
http://oldetoolshop.com/forsale/may/machinisttool0502c.jpg
http://oldetoolshop.com/forsale/may/machinisttool0502d.jpg
http://oldetoolshop.com/forsale/may/machinisttool0502e.jpg
Grosser 7 1/2 Inch Needle Straightening Pliers. Measuring 7 1/2" long,
the jaws are 1 15/16" deep, 3/16" wide at the tips, and this weighs 4
3/4 oz unboxed. The Grosser Knitting Machine Company was a New York
based supplier of such goods and tools related to the trade. This is in
decent condition and was cleaned. There are some scuffs, stains, and a
little frosting. The jaws are good on the insides, and close up tight
and flush. The through the center style joint is also good with no play.
This ain't minty, but it will get the job done. $16.00
http://oldetoolshop.com/forsale/may/pliers0502a.jpg
http://oldetoolshop.com/forsale/may/pliers0502b.jpg
http://oldetoolshop.com/forsale/may/pliers0502c.jpg
Patternmaker Founders Fillet Radius Tool. Measuring 6 11/16" long, the
balls are 5/8" and 3/4" in diameter, and this weighs 2 3/4 oz unboxed.
Not signed as to the maker. This is in reasonably good condition and
was cleaned. There ain't much in the way of overall patina. Somebody
partially flattened the side of the 3/4" ball, but not enough to affect
this being used. The 5/8" ball is good. This ain't perfect, but these
guys have been sure hard to come by of late. $14.00
http://oldetoolshop.com/forsale/may/founderstool0501a.jpg
http://oldetoolshop.com/forsale/may/founderstool0501b.jpg
http://oldetoolshop.com/forsale/may/founderstool0501c.jpg
B & S No 80 Flat Jaw Jewelers Pliers. Measuring 5 1/4" long, the jaws
are 1 1/16" deep, 5/16" wide at the tips, and this weighs 3 oz unboxed.
This is in decent condition and was cleaned. There is some frosting and
some wear. A previous owner added some file lines on the side of the
one jaw and on the inside of the one handle. The jaws are good and
close up flush. The cross hatching might have been user done as well.
The through the center joint is good with no play. The one handle is
bent a little. This ain't pristine, but it's an older tool that will
get the job done. $14.00
http://oldetoolshop.com/forsale/may/pliers0501a.jpg
http://oldetoolshop.com/forsale/may/pliers0501b.jpg
http://oldetoolshop.com/forsale/may/pliers0501c.jpg
http://oldetoolshop.com/forsale/may/pliers0501d.jpg
H Disston & Sons No 1 8 Inch Try Square. This weighs 7 oz unboxed.
This is in reasonably good condition and was cleaned. The blade has some
small stained and light spots of patina, but nothing too bad and it has
almost all of the original bluing. All the rulings are readable and the
edges and corners are good. The handle has some wear, dings, and user
initials on the back. This ain't pristine, but it will get the job
done. $18.00
http://oldetoolshop.com/forsale/may/square0503a.jpg
http://oldetoolshop.com/forsale/may/square0503b.jpg
http://oldetoolshop.com/forsale/may/square0503c.jpg
Stanley Yankee No 2101A Bell System 10 Inch Sweep Brace. This weighs 3
lbs 1 3/4 oz unboxed. This is in reasonably good condition and was
cleaned. The plating on the frame is good other than some light
scuffs. The cross hatching on the chuck shell has a little wear and the
plating is worn around the jaw opening. The jaws and springs are good.
The ratchet works in both directions and the locked position. There is
some wear to the plating on the end cap on the chuck. The grip and pad
have some scuffs and wear, but both spin freely. This ain't pristine,
but it sure ain't bad, and it will get the job done. $75.00
http://oldetoolshop.com/forsale/may/brace0502a.jpg
http://oldetoolshop.com/forsale/may/brace0502b.jpg
http://oldetoolshop.com/forsale/may/brace0502c.jpg
http://oldetoolshop.com/forsale/may/brace0502d.jpg
Vintage Hand Vise Or Handvise. Measuring 5 1/16" long, the jaws are 1
7/16" wide, and this weighs 11 oz unboxed. Not signed as to the maker.
This is in reasonably good condition and was cleaned. The machined areas
of the jaws have some frosting and light patina, the rest of the body
was never finished off real pretty like to begin with. The jaws are
fairly good, they close up tight, but not quite flush at the tops and
sides. The cross hatching on the faces is worn, but visible. The screw
is good and travels the full distance. The joint and spring are good as
well. This ain't pristine, but it will get the job done. $30.00
http://oldetoolshop.com/forsale/may/handvise0501a.jpg
http://oldetoolshop.com/forsale/may/handvise0501b.jpg
http://oldetoolshop.com/forsale/may/handvise0501c.jpg
L S Starrett No 27 4 Inch Firm Joint Inside Caliper. Measuring 4 5/16"
long and this weighs 1 1/4 oz unboxed. This is in reasonably good
condition and was cleaned. There are some scuffs and a few spots of
light pitting. The joint is good and holds position. The tips are also
good save for some light patina. This ain't pristine, but it will get
the job done. $14.00
http://oldetoolshop.com/forsale/may/machinisttool0504a.jpg
http://oldetoolshop.com/forsale/may/machinisttool0504b.jpg
http://oldetoolshop.com/forsale/may/machinisttool0504c.jpg
Hand Forged 10 Oz Cross Peen Hammer Head. Measuring 3 11/16" long, the
face is 13/16" in diameter, the peen is 15/16" wide, and this weighs 10
oz unboxed. Not signed as to the maker. This is in reasonably good
condition and was cleaned. There is some overall light patina. The
face has some light dings and wear as does the peen. What the hole is
for on the top of the peen, I have not a clue, maybe somebody was going
to mount a coffee cup holder, eh? The punched eye has a little crusty
on the inside, but nothing too bad. This ain't pristine, but drop it on
a handle and it will get the job done. $17.00
http://oldetoolshop.com/forsale/may/hammer0503a.jpg
http://oldetoolshop.com/forsale/may/hammer0503b.jpg
http://oldetoolshop.com/forsale/may/hammer0503c.jpg
Stanley No 180 18 Inch Brace Auger Bit Extension. This weighs 13 1/2 oz
unboxed. This is in very good condition and was not cleaned. I don't
think that it got used much if at all. There is no patina at all to
fuss about. The chuck and tang are good. I gotta say, that these guys
rarely show up in this kinda of shape. $20.00
http://oldetoolshop.com/forsale/may/bracetool0502a.jpg
http://oldetoolshop.com/forsale/may/bracetool0502b.jpg
Vintage Cast Iron Bed Key Or Wrench. Measuring 6 11/16" long and this
weighs 10 3/4 oz unboxed. Not signed as to the maker. This is in
reasonably good condition and was cleaned. There ain't much in the way
of overall patina, but these guys were never finished off real pretty to
start with. All of the wrench sockets have a little wear on the insides
and some light funky, but all are good with no cracks that I can see. I
gotta say, that these guys have sure been few and far between of late.
$24.00
http://oldetoolshop.com/forsale/april/bedwrench0401a.jpg
http://oldetoolshop.com/forsale/april/bedwrench0401b.jpg
http://oldetoolshop.com/forsale/april/bedwrench0401c.jpg
Early Hand Forged Claw Hammer. Measuring 13" overall, the head is 5
13/16" long, the face is 1 1/4" square, the claws are 1 1/2" wide at the
tips, and this weighs 1 lb 14 3/4 oz unboxed. Not signed as to the
maker. This has a steel face on a wrought iron body. This is in fair
condition, it was cleaned, and it wasn't the first time either. There
is some overall pitting, patina, and some scuff marks from the first
time this was done. The face had some mushrooming removed and was
dressed. There are some small checks around the rim and some small
chips at the top. The claws were dressed on both the tops and
undersides (again, not by me!) The eye looks to be good with no cracks
that I can see. The handle is an older replacement and is good. This
ain't minty, but then tools of this age rarely are. $17.00
http://oldetoolshop.com/forsale/april/earlyhammer0401a.jpg
http://oldetoolshop.com/forsale/april/earlyhammer0401b.jpg
http://oldetoolshop.com/forsale/april/earlyhammer0401c.jpg
http://oldetoolshop.com/forsale/april/earlyhammer0401d.jpg
Sandusky Tool 2 3/8 Inch Bench Plane Iron & Cap. Measuring 8 1/16"
long, the edge is 2 3/8" wide, and this weighs 15 1/2 oz unboxed. This
is in good condition and was cleaned. The working face is clean save
for some very light scuffs and stains and there is lots there to work
with. The edge is slightly convex, but will need a touch up. The
exposed areas are good and the back has some stains and light patina.
The cap iron has some light stains on the front. The back was never
finished off real pretty to start with. The screw works. I gotta say
that these guys sure do not show up in this kind of condition much at
all any more. $25.00
http://oldetoolshop.com/forsale/april/planeiron0401a.jpg
http://oldetoolshop.com/forsale/april/planeiron0401b.jpg
http://oldetoolshop.com/forsale/april/planeiron0401c.jpg
http://oldetoolshop.com/forsale/april/planeiron0401d.jpg
Craftsman No 9-4026 Combination Tool. Measuring 5 3/4" long and this
weighs 1 oz unboxed. This has a 1937 Copyright date. This is a
protractor, drill point gage, square, and center finder, all rolled into
one tool. This is in reasonably good condition and was not cleaned.
There are some light scuffs and a couple of stains, but overall nothing
too bad. All the rulings and tables are readable. The edges are good
and the arm is also good and holds position. This is a handy tool that
will get the job done. $17.00
http://oldetoolshop.com/forsale/april/machinisttool0414a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0414b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0414c.jpg
http://oldetoolshop.com/forsale/april/machinisttool0414d.jpg
Millen Mfg Co JIFFY TITE 1929 Patent Screwdriver. Measuring 8 3/8"
long, the tip is 3/16" wide, and this weighs 2 oz unboxed. Edward L.
Millen of Brookline, MA was granted Pat. No. 1,699,306 on Jan. 15, 1929
for the design of this tool. This is in reasonably good condition and
was cleaned. There is a little patina on the head and shaft. The tip
is good and still has most of the original lines. The spring is good
and the gripper works. The handle looks to be Bakelite and is good. I
gotta say, that these guys are sure getting hard to come by in this kind
of shape. $18.00
http://oldetoolshop.com/forsale/april/screwdriver0403a.jpg
http://oldetoolshop.com/forsale/april/screwdriver0403b.jpg
http://oldetoolshop.com/forsale/april/screwdriver0403c.jpg
Early Hand Forged Denglestock PA Dutch Scythe Sharpening Anvil.
Measuring 8 1/4" long, the face is 1 1/16" wide, and this weighs 1 lb 3
1/2 oz unboxed. Not signed as to the maker. This is in decent
condition and was cleaned. This does have a steel face set into the
wrought iron body and that is some right hard steel. There is the usual
overall patina found on these kind of tools. The face has some dots of
pitting and a small chip off the one end. The spike has a wee bit of
mushrooming and will need a dressing. This ain't perfect, but these
guys rarely show up in that kind of shape. $25.00
http://oldetoolshop.com/forsale/april/denglestock0401a.jpg
http://oldetoolshop.com/forsale/april/denglestock0401b.jpg
http://oldetoolshop.com/forsale/april/denglestock0401c.jpg
Brown & Sharpe No 835 4 Inch Firm Joint Hermaphrodite Caliper.
Measuring 4 1/4" long and this weighs 1 oz unboxed. This is in good
condition and was not cleaned. Other than some light shop patina, there
ain't much to fuss about with this guy. The joint is good and holds
position. The points are good and the screw works. This ain't minty,
but it will get the job done. $15.00
http://oldetoolshop.com/forsale/april/machinisttool0411a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0411b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0411c.jpg
P S & W No 3003 8 Inch Sweep Brace. This weighs 2 lbs 9 3/4 oz
unboxed. This is in reasonably good condition and was cleaned. There
is some frosting and a few spots of light pitting. The chuck and jaws
are good and the ratchet works in both directions and the locked
position. The grip and pad are good, the pad does have a couple of tiny
bits of paint down in the grain, but both spin freely. This ain't
minty, but it is a quality tool that will get the job done. $25.00
http://oldetoolshop.com/forsale/april/brace0401a.jpg
http://oldetoolshop.com/forsale/april/brace0401b.jpg
http://oldetoolshop.com/forsale/april/brace0401c.jpg
http://oldetoolshop.com/forsale/april/brace0401d.jpg
Early Hand Forged From File 1 Inch Firmer Chisel. Measuring 6 11/16"
from the edge to the top of the handle, the blade is 4 1/16" long, 1"
wide at the edge and it tapers down to 13/16", this is 12 3/4" overall,
and this weighs 10 1/4 oz unboxed. Not signed as to the maker. This is
in decent condition and was cleaned. The back has some scuffs and a
little frosting, but overall nothing too bad. The edge will need a
touch up. The top has some light patina and some of the file teeth are
visible. The handle has some stains, but it's solid. This ain't got a
fancy name, but it's a solid and well made tool that will get the job
done. $20.00
http://oldetoolshop.com/forsale/april/earlychisel0401a.jpg
http://oldetoolshop.com/forsale/april/earlychisel0401b.jpg
http://oldetoolshop.com/forsale/april/earlychisel0401c.jpg
L S Starrett No 38 10 Inch Lock Joint Outside Caliper. Measuring 10
3/8" long (from the tips to the top of the joint) and this weighs 8 1/2
oz unboxed. This is in decent condition and was cleaned. There is some
frosting and staining overall, and there are user initials stamped on
both sides. The joint is good and the locking screw works. The fine
adjuster works and the tips are good. This ain't minty, but it will get
the job done. $24.00
http://oldetoolshop.com/forsale/april/machinisttool0407a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0407b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0407c.jpg
L S Starrett No 41 8 Inch Firm Joint Hermaphrodite Caliper. Measuring 8
1/16" long and this weighs 3 3/4 oz unboxed. This is in decent
condition and was cleaned. There is some overall frosting and light
patina. The joint is a little stiff, but it does reverse and holds
position. The caliper tip has some dings. The moveable point screw
works. This ain't the prettiest, but it will get the job done. $14.00
http://oldetoolshop.com/forsale/april/machinisttool0409a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0409b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0409c.jpg
Brown & Sharpe 12 Inch 3 Piece Machinist Combination Square. This weighs
1 lb 1/4 oz unboxed. This is in decent condition and was cleaned. Both
heads are hardened and have some dings and wear to the finish. The
vertical and mitre surfaces of the square head have some staining, but
nothing too bad. There is is very light pitting on the small section in
between. The clear level vial is good and the scribe is present. The
center head also has some staining on the inside. Both locking screws
and tabs are good. The tempered rule has some frosting, stains, and some
spots of light pitting. All the rulings are readable and the edges are
good, but there is a little wear on the tops of the corners. This ain't
minty, but it is a quality tool that will get the job done. $50.00
http://oldetoolshop.com/forsale/april/machinisttool0410a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0410b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0410c.jpg
http://oldetoolshop.com/forsale/april/machinisttool0410d.jpg
http://oldetoolshop.com/forsale/april/machinisttool0410e.jpg
http://oldetoolshop.com/forsale/april/machinisttool0410f.jpg
FOUR Ramelson USA Small Carving Tools. There is a 5/16" skew chisel, a
3/8" bent chisel, a 1/16" (across the inside of the sweep) straight
gouge, a 1/8" bent V-gouge, and they weigh 3 1/2 oz unboxed. These are
in good condition and were cleaned. The skew chisel does have some
light pitting, but the rest are good. The handles all are good and have
all of the original finish. These are quality tools that will get the
job done. $30.00
http://oldetoolshop.com/forsale/april/carvingtoolset0401a.jpg
http://oldetoolshop.com/forsale/april/carvingtoolset0401b.jpg
http://oldetoolshop.com/forsale/april/carvingtoolset0401c.jpg
http://oldetoolshop.com/forsale/april/carvingtoolset0401d.jpg
Vintage Lancashire Pattern 5 Inch Outside Caliper. Measuring 5 3/16"
long and this weighs 2 1/4 oz unboxed. Not signed as to the maker.
This is in reasonably good condition and was cleaned. There is a little
frosting, but overall nothing too bad. The spring is good. The tips
were dressed at some point and only close down to 5/16". The nut
travels the full distance. This ain't pristine, but it will get the job
done. A working and collectible old layout tool for sure! $14.00
http://oldetoolshop.com/forsale/april/earlydivider0402a.jpg
http://oldetoolshop.com/forsale/april/earlydivider0402b.jpg
http://oldetoolshop.com/forsale/april/earlydivider0402c.jpg
Millers Falls Machinist 8 Inch Outside Caliper. Measuring 9 1/16" long
and this weighs 5 1/4 oz unboxed. This is in reasonably good condition
and was cleaned. The legs have some stained and frosted spots, and M
made his mark on both sides, but overall there is nothing too bad patina
wise. The spring originally had a spinner on the top, but that is MIA,
and that and the tips are good. The nut travels the full distance.
This ain't pristine, but it will get the job done. $17.00
http://oldetoolshop.com/forsale/april/machinisttool0403a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0403b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0403c.jpg
Products Engineering No 402-012 12 Inch Machinist Rule. This weighs 2
1/4 oz unboxed. This is in reasonably good condition and was not
cleaned. There are some light scuffs and stains, but overall nothing
too bad. The edges and corners are good and all the rulings are
readable. This ain't perfect, but it will get the job done. $16.00
http://oldetoolshop.com/forsale/april/machinisttool0404a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0404b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0404c.jpg
C S Osborne No 29 Circle Compass. Measuring 5 3/8" long and this
weighs 2 1/2 oz unboxed. This is in reasonably good condition and was
cleaned. The legs are good other than a little frosting. The wing has
some dots of light pitting. The 3 finger (2 + 1) joint is good and the
locking screw works. The point is good and the cutter tip feels sharp
to the touch on both sides. This ain't minty, but it sure ain't bad,
and these guys have sure been few and far between of late. $75.00
http://oldetoolshop.com/forsale/april/leathertool0402a.jpg
http://oldetoolshop.com/forsale/april/leathertool0402b.jpg
http://oldetoolshop.com/forsale/april/leathertool0402c.jpg
http://oldetoolshop.com/forsale/april/leathertool0402d.jpg
Stanley Handyman No 1500 6 Inch Pliers. Measuring 6 3/8" long and this
weighs 5 1/2 oz unboxed. This is in good condition and was lightly
cleaned. I got rid of some oil stains around the joint and the
obligatory paint splats. The plating is good save for some light scuffs
and stains. The jaws and slip joint are good. This ain't minty, but
it's pretty darn close. $15.00
http://oldetoolshop.com/forsale/april/pliers0401a.jpg
http://oldetoolshop.com/forsale/april/pliers0401b.jpg
http://oldetoolshop.com/forsale/april/pliers0401c.jpg
North Bros Yankee No 3030 Countersink Bit. This weighs 1/2 oz unboxed.
This will fit the Nos. 30 and 130 push screwdrivers along with the A
models as well. This is in condition and was not cleaned. There is a
little staining on the head, but the edge is good. I don't think that
this one got used much if at all. The shaft is also good save for a few
very light dings to the finish. These guys are sure getting hard to come
by, at least around these here parts. $17.00
http://oldetoolshop.com/forsale/april/yankee0401a.jpg
http://oldetoolshop.com/forsale/april/yankee0401b.jpg
Vintage Mahogany Oval Head Marking Gage Or Gauge. The beam is 9 1/16"
long and this weighs 3 oz unboxed. Not signed as to the maker. This is
in reasonably good condition and was cleaned. The beam is good other
than some grain checks on the back side by the point and all the rulings
are readable. The point is good. The head is also good with not much
in the way of wear and the locking screw works. This ain't gotta fancy
name, but it's a good looking older tool that will get the job done. $14.00
http://oldetoolshop.com/forsale/april/markinggage0401a.jpg
http://oldetoolshop.com/forsale/april/markinggage0401b.jpg
http://oldetoolshop.com/forsale/april/markinggage0401c.jpg
http://oldetoolshop.com/forsale/april/markinggage0401d.jpg
Vintage No 3 Rivet Set or Setter. Measuring 4 1/16" long, the post hole
is 3/16" in diameter, the dimple is 1/4", and this weighs 6 1/4 oz
unboxed. Not signed as to the maker. This is in decent condition and
was cleaned. There is some overall light patina. The face has some
very light pitting and a scratch on the one side of the dimple, but both
that and the post hole are good. The handle has some dings on both
sides. The striking end had some mushrooming removed and there are a
few voids on the corners, but it's good to go. This ain't the
prettiest, but it's a solid tool that will get the job done. $14.00
http://oldetoolshop.com/forsale/april/rivetset0401a.jpg
http://oldetoolshop.com/forsale/april/rivetset0401b.jpg
http://oldetoolshop.com/forsale/april/rivetset0401c.jpg
Jennings & Griffith No 6 1/2 Inch Paring Bevel Side Chisel. Measuring 7
9/16" from the edge to the end of the socket, the blade is 5 1/4" long,
this is 11 11/16" overall, and this weighs 5 oz unboxed. This is in
decent condition and was cleaned. The back has some frosting, staining,
and few tiny dots of pitting, but overall nothing too bad. The top also
has some patina going. The socket has some light pitting. The handle
looks to be the original one. That has some stains and dings, but it's
solid. I did not have it off of the tool. This ain't pristine, but it
will get the job done. $17.00
http://oldetoolshop.com/forsale/mar/chisel0307a.jpg
http://oldetoolshop.com/forsale/mar/chisel0307b.jpg
THREE Lufkin Patternmakers Shirk Rules. Left to right in the first
picture there is a C-83G, 1/4" to 1 ft, a C-83F, 3/16" to 1 ft, a C-83K,
3/8" to 1 ft, and they weigh 6 1/2 oz unboxed. These are in reasonably
good condition and were lightly cleaned. There are some scuffs and
overall light wear, but nothing too bad. There are user initials deeply
stamped on the back of the one. All the rulings are readable. The edges
are good, but a few of the corners have some very light wear. These
ain't pristine, but they are quality tools that will get the job done.
$35.00
http://oldetoolshop.com/forsale/april/shrinkrule0401a.jpg
http://oldetoolshop.com/forsale/april/shrinkrule0401b.jpg
http://oldetoolshop.com/forsale/april/shrinkrule0401c.jpg
http://oldetoolshop.com/forsale/april/shrinkrule0401d.jpg
http://oldetoolshop.com/forsale/april/shrinkrule0401e.jpg
TWO Brown & Sharpe 4 Inch Machinist Calipers. They measure 4 5/16" high
and they weigh 2 oz unboxed. These are in reasonably good condition and
were cleaned. Both have the same M user mark in a few places. The
inside caliper does have some small pitted spots on the back of the
legs, but the fronts are good as is the outside one. Both joints are
good, the inside is a wee bit stiff, but it works. The tips are good as
well. These ain't perfect, but they are quality tools that will get the
job done. $24.00
http://oldetoolshop.com/forsale/mar/machinisttool0316a.jpg
http://oldetoolshop.com/forsale/mar/machinisttool0316b.jpg
http://oldetoolshop.com/forsale/mar/machinisttool0316c.jpg
TWO Vintage General No 520 Trammel Points & Box. There are the trammel
points, the pencil tip, an assortment of replacement steel tips, and
this all weighs 7 oz unboxed. These are in reasonably good condition
and were not cleaned. There is some wear to the finish on the heads,
but most of it is there. All of the screws work and the points remove.
The box has some staining and wear and there is a rip on the label side
of the lid, but overall it's solid. These ain't pristine, but they are
one of General's better products, and they will get the job done. $34.00
http://oldetoolshop.com/forsale/mar/trammelpoints0301a.jpg
http://oldetoolshop.com/forsale/mar/trammelpoints0301b.jpg
http://oldetoolshop.com/forsale/mar/trammelpoints0301c.jpg
http://oldetoolshop.com/forsale/mar/trammelpoints0301d.jpg
---------------------------------------------
"If you only knew the magnificence of the 3, 6 and 9, then you would
have the key to the universe."
Nikola Tesla
Tony
Olde River Hard Goods
http://www.oldetoolshop.com
TSMusic on Facebook
http://www.facebook.com/tonyseomusic
|
