The third run of tools for July (in case you are keep track, I messed up
the subject line for the first one this month). Got some great
collectibles and user tools that are fresh arrivals along with some
other items from previous lists.
PayPal is now accepted and preferred (if you use it) on all items. It's
easier for me to ship items off of a paid PayPal invoice, especially
First Class ones. Checks and money orders are still welcome.
And remember........da more ya buy, the cheaper they fly!
First contact (that is e-mail, or phone) that says I want it gets it.
Prices do not include shipping. All items are shipped with Delivery
Confirmation. Insurance, unless it is a big order or a very fragile item
is optional. Just let me know. Also, I am shipping a lot more stuff via
First Class mail. There will be a small amount added to the shipping
cover the cost of the padded mailer. I don't get them for free.
Please put your name and address in the message. Saves time and email
traffic!
---------------------------------------------------
Four Miniature Wood Molding Planes. There is a 3/8" compass round
measuring 2 5/16" long, a 1/4" round measuring 2 1/4" long, a 5/16"
hollow measuring 1 3/4" long, a 3/8" compass snipe bill measuring 2 1/4"
long, and they weigh 2 1/2 oz unboxed. Not signed as to the maker.
These are in reasonably good condition, the only cleaning I did was on
the faces of the irons. The bodies are good other than some staining on
a couple of them. The soles and mouths are good as well. A couple of
the irons have some light pitting on the faces. The wedge on the snipe
bill was replaced at some point, that's not quite a perfect fit, the
others look to be original. These are neat and very collectible planes
and they are not very common at all to find. The price on this item
includes US Priority Mail Shipping plus insurance. The price is firm.
$140.00
http://oldetoolshop.com/forsale/july/woodenplaneset0701a.jpg
http://oldetoolshop.com/forsale/july/woodenplaneset0701b.jpg
http://oldetoolshop.com/forsale/july/woodenplaneset0701c.jpg
http://oldetoolshop.com/forsale/july/woodenplaneset0701d.jpg
http://oldetoolshop.com/forsale/july/woodenplaneset0701e.jpg
http://oldetoolshop.com/forsale/july/woodenplaneset0701f.jpg
Stanley No 2 Excelsior Tool Handle. This weighs 4 1/2 oz unboxed.
Nathan S. Clement of New Britain, CT was granted Pat. No. 62,938 on
March 19, 1867 for the design of this tool. This is in decent condition
and was not cleaned. There is some wear to the finish on the body. The
cap is good with no cracks to the inside threaded area. The chuck is
also good. This has 9 of the original bits. A couple of them are short
and they have a little patina. This ain't minty but considering that
it's at the least, 133 years old, well it sure ain't bad. $60.00
http://oldetoolshop.com/forsale/july/toolhandle0701a.jpg
http://oldetoolshop.com/forsale/july/toolhandle0701b.jpg
http://oldetoolshop.com/forsale/july/toolhandle0701c.jpg
Four Chip Carving Tools. They weigh 3 1/4 oz unboxed. Made in Japan.
These are in used but good condition and were not cleaned. The blades
have some stains but nothing too bad. The edges will need a touch up.
The handles are also good save for a few tiny stains. These ain't the
fanciest but they will get the job done. $18.00
http://oldetoolshop.com/forsale/july/chipknife0701a.jpg
http://oldetoolshop.com/forsale/july/chipknife0701b.jpg
http://oldetoolshop.com/forsale/july/chipknife0701c.jpg
http://oldetoolshop.com/forsale/july/chipknife0701d.jpg
Carborundum No 182 Slipstone Sharpening Stone. Measuring 4 1/2" long, 2
1/8" high, 3/8" wide across the narrow end, 5/8" wide across the other
end, and this weighs 5 1/2 oz unboxed. This feels like a medium grit.
This is in very good condition and was not cleaned. I really don't
think that it was used at all. There are a couple of stains from being
handled. Both of the ends are good with no wear. This is the stone to
have for gouges and carving tools. $18.00
http://oldetoolshop.com/forsale/july/sharpeningstone0703a.jpg
http://oldetoolshop.com/forsale/july/sharpeningstone0703b.jpg
Union Mfg Co Spoke Shape Or Spokeshave. Measuring 9 1/4" long, the b
lade has 2" wide, and this weighs 8 1/2 oz unboxed. This is in decent
condition and was cleaned. The finish is pretty much gone on the
outside. The sole has some frosting and small pitted spots. The b lade
has some light patina but nothing too bad and there is plenty there to
work with. The tabs and the locking screw are good. This ain't
pristine but these guys sure don't show up very often. $30.00
http://oldetoolshop.com/forsale/july/spokeshave0704a.jpg
http://oldetoolshop.com/forsale/july/spokeshave0704b.jpg
http://oldetoolshop.com/forsale/july/spokeshave0704c.jpg
Stanley SW No 104 Carpenters Level. Measuring 12" long and this weighs
11 oz unboxed. This is in reasonably good condition and was not
cleaned, at least by me. The finish has some light dings, wear on the
base, and few tiny bits of paint. The level plate has a small ding on
the one side. Both of the level vials are good. This ain't minty but
for a working tool, it sure ain't bad. $18.00
http://oldetoolshop.com/forsale/july/level0701a.jpg
http://oldetoolshop.com/forsale/july/level0701b.jpg
http://oldetoolshop.com/forsale/july/level0701c.jpg
Stanley No 22 Dowel Pointer For A Brace. Measuring 2 13/16" long, the
head is 3/4" in diameter (inside), and this weighs 1 oz unboxed. This
is in good condition and was not cleaned, at least by me. There ain't
nothing patina wise to fuss about. The tang and edge are good. This is
a neat little tool to say the least. $20.00
http://oldetoolshop.com/forsale/july/bracetool0701a.jpg
http://oldetoolshop.com/forsale/july/bracetool0701b.jpg
H Disston & Sons 1875 Patent Saw Set Or Wrest. Measuring 8 5/16" long
and this weighs 9 1/2 oz unboxed. Henry Disston of Philadelphia, PA was
granted Pat. No. 163,162 on May 11, 1875 for the design of this tool.
This is in decent condition and was cleaned by someone else. The finish
is original and down to about 50%. The wheel is clean other than a
little patina down deep and all of the notches are good. All three
screws work. This ain't minty but these guys sure do not show up very
often. $35.00
http://oldetoolshop.com/forsale/july/sawset0701a.jpg
http://oldetoolshop.com/forsale/july/sawset0701a.jpg
P S & W No 1 Tinsmith Tin Seamer. Measuring 5 7/16" long, the groove is
3/8" wide, and this weighs 1 lb 2 oz unboxed. This is in decent
condition and was cleaned by someone else. There is some overall light
pitting. The face and grrove are good. The striking end did have some
mushrooming removed and that is good to go. This ain't minty but these
guys have sure been few and far between of late. $22.00
http://oldetoolshop.com/forsale/july/tintool0701a.jpg
http://oldetoolshop.com/forsale/july/tintool0701b.jpg
Blacksmith Hand Forged 1 1/4 lb Cross Peen Hammer Head Working Anvil
Tool READ
Blacksmith Hand Forged 1 1/4 lb Cross Peen Hammer Head. Measuring 4
5/8" long, the face is 1 1/16" high, 1 1/8" wide, the peen is 1 3/16"
wide, and this weighs 1 lb 4 oz unboxed. Not signed as to the maker.
This is in decent condition and was cleaned. This has an iron body with
a steel face. There is some overall pitting. The face also has some
light pitting and wear. There are a few small voids on the forge weld
where it meets the body but it's not cracked. The peen was dressed at
some point and there are some scuffs on the top and underside. The
punched eye is good. This ain't pretty or perfect but it's an old dog
that will get the job done. $18.00
http://oldetoolshop.com/forsale/july/hammer0705a.jpg
http://oldetoolshop.com/forsale/july/hammer0705b.jpg
http://oldetoolshop.com/forsale/july/hammer0705c.jpg
Small Vintage Cross Peen Hammer. Measuring 7 3/4" overall, the head is
2 3/4" long, the face is 5/8" square, the peen is 5/8" wide, and this
weighs 5 1/4 oz unboxed. Not signed as to the maker. This is in decent
condition and was cleaned. The head has a little patina and there are
user initials on the back. The face has some light dings, wear, and
there is a little mushrooming around the edge. The peen has some scuffs
on the top and underside from being dressed at some point. The peen has
a couple of tiny dings. The handle is old and could be the original
one. That has some stains and dings but it's solid. This ain't
pristine but it will get the job done. $16.00
http://oldetoolshop.com/forsale/july/hammer0704a.jpg
http://oldetoolshop.com/forsale/july/hammer0704b.jpg
http://oldetoolshop.com/forsale/july/hammer0704c.jpg
Vintage Machinist 8 Inch Inside Caliper. Measuring 8 3/16" long and
this weighs 2 1/2 oz unboxed. Not signed as to the maker, there is a
user name and this is dated 1889. This is in decent condition and was
cleaned. The legs have some spots of pitting. The tips are good. The
joint is also good and holds position. This ain't the fanciest but it
will get the job done. $19.00
http://oldetoolshop.com/forsale/july/machinisttool0716a.jpg
http://oldetoolshop.com/forsale/july/machinisttool0716b.jpg
Hand Forged Small Coopers Bung Auger. Measuring 7 15/16" overall in
length, the auger is 1/4" wide at the tip, 1 1/4" at the start of the
tang, the handle is 5 5/8" wide, and this weighs 6 3/4 oz unboxed. Not
signed as to the maker. This is in decent condition and was cleaned.
The back of the auger has some frosting and some small flaws left over
from when this was made. The inside has a little light rust. The lead
screw is good. Both of the side edges have a little wear but aren't too
bad. The handle is original to the tool. That has some stains and wear
but it's solid. This ain't pristine but these guys sure are getting
hard to find out in the wild. $18.00
http://oldetoolshop.com/forsale/july/hfcoopertool0701a.jpg
http://oldetoolshop.com/forsale/july/hfcoopertool0701b.jpg
http://oldetoolshop.com/forsale/july/hfcoopertool0701c.jpg
Stanley SW No 36 6 Inch Carpenters Caliper Rule. This weighs 1 oz
unboxed. This is in decent condition and was cleaned by someone else.
The finish is gone, but the boxwood is good and all the rulings are
readable. The caliper moves, it's a little loose once it's out. The
brass has a few stained spots. The joint is good and the locator pin is
present. This ain't pristine but it sure ain't bad either. $22.00
http://oldetoolshop.com/forsale/july/rule0702a.jpg
http://oldetoolshop.com/forsale/july/rule0702b.jpg
Wood Carvers Mallet. Measuring 10" overall, the head is 4 3/16" high, 3
5/8" in diameter across the top, and this weighs 1 lb 1 oz unboxed. Not
signed as to the maker. This is NOS (that's New Old Stock). I did remove
a thick coating of wax on it and put some of my own special blend on it,
but there still is a little on there. The head has a small void on the
rim and a couple of knots. There is a grain line where the head starts
but it's not cracked. NOTE: I have a number of these and the mallet you
get will vary slightly from the picture. I'll send pics of the one you
get before shipping. $17.00
http://oldetoolshop.com/forsale/july/woodenmallet0702a.jpg
http://oldetoolshop.com/forsale/july/woodenmallet0702b.jpg
Early Hand Forged 1 5/8 Inch Lipped Ship Builders Auger. Measuring 23
3/8" overall, the head is 7 1/4" long, 1 5/8" in diameter, and this
weighs 2 lbs 7 3/4 oz unboxed. Not signed as to the maker. This is in
decent condition and was cleaned. There is some overall patina. The
head has some pitting on both sides but the lips are good. The eye is
slightly twisted and there is a small void along the forge weld line but
it's solid. The handle is ain't old replacement. That has some paint
stains and somebody wrapped some string around the center to keep it
from falling out. This ain't pristine but these big early ones are sure
getting few and far between, at least around here. $30.00
http://oldetoolshop.com/forsale/july/earlyauger0701a.jpg
http://oldetoolshop.com/forsale/july/earlyauger0701b.jpg
http://oldetoolshop.com/forsale/july/earlyauger0701c.jpg
Lufkin Rule No 18B Combination Square Attachment Clamp. This weighs 4
oz unboxed. This is the same tool as a Starrett No. 289B ruler clamp.
This is in reasonably good condition and was lightly cleaned. There
ain't much in the way of patina overall. Somebody put a hole in the
body, probably to fix this to a workbench, but that won't affect this
being used. Both of the rule screws and tabs are good and the set
screws on the side both turn. This ain't minty but it will get the job
done. $25.00
http://oldetoolshop.com/forsale/july/machinisttool0709a.jpg
http://oldetoolshop.com/forsale/july/machinisttool0709b.jpg
Long 1/4 Inch Mortising Chisel. Measuring 10 7/8" from the edge to the
end of the socket, the b lade is 7 7/8" long, this is 16 3/8" overall,
and this weighs 10 oz unboxed. Not signed as to the maker. This is in
reasonably good condition and was cleaned. The back has a few spots of
frosting and some factory machining marks but nothing too bad. The rest
of the metal has more of the same. The socket is good. The handle is a
replacement. That has a few stains but it's solid. This ain't got a
fancy name but it will get the job done. $19.00
http://oldetoolshop.com/forsale/july/chisel0703a.jpg
http://oldetoolshop.com/forsale/july/chisel0703b.jpg
Lufkin Tool Co 12 Inch Machinist Inside Micrometer Set. This weighs 1
lb 9 1/2 oz unboxed. This is in used but good condition and was not
cleaned. This is complete with all of the rods. They have a little
staining but nothing too bad. The micrometer head has a little oil
staining. That travels smoothly and the locking screws work. The case
has some wear on the top and a description marked on the side. The
hinges and locks are good. This ain't minty but it is a set of quality
tools that will get the job done. $60.00
http://oldetoolshop.com/forsale/july/machinisttool0706a.jpg
http://oldetoolshop.com/forsale/july/machinisttool0706b.jpg
http://oldetoolshop.com/forsale/july/machinisttool0706c.jpg
http://oldetoolshop.com/forsale/july/machinisttool0706d.jpg
Buck Bros 7/16 Inch Gouge. Measuring 4 3/4" from the edge to the top of
the handle, the b lade is 3 7/16" long, 7/16" wide across the outside of
the sweep, this is 9 3/4" overall, and this weighs 2 1/2 oz unboxed.
The handle mark is a bit faint. This is in reasonably good condition
and was cleaned. The inside of the sweep has some frosting and a spot
of light pitting about 2/3rds down. The back has some staining. I
roughed in a new edge because of some chipping but that will need some
fine tuning. The handle has a few stains but it's solid. This ain't
pristine but it will get the job done. $15.00
http://oldetoolshop.com/forsale/july/chisel0702a.jpg
http://oldetoolshop.com/forsale/july/chisel0702b.jpg
Blacksmith Forged 2 lb Cross Peen Hammer Head. Measuring 4 3/4" long,
the face is 1 7/16" wide, 1 3/8" high, the peen is 1 1/2" wide, and this
weighs 2 lbs 2 1/4 oz unboxed. Marked F K on the one side and Hands Off
on the other along with the decorative stamps. Neat eh? This is in
decent condition and was cleaned. The one side has some light pitting,
the other side some deeper pitting. Somebody else dressed some
mushrooming off of the face. The face has some dings and light cut
marks. The peen has some light roughness. The punched eye is a little
uneven but it's solid. This ain't minty but I sure don't see too many
of these guys that are signed and decorated. $22.00
http://oldetoolshop.com/forsale/july/hammer0701a.jpg
http://oldetoolshop.com/forsale/july/hammer0701b.jpg
http://oldetoolshop.com/forsale/july/hammer0701c.jpg
Hand Forged Small Stone Mason Prospecting Hammer Head. Measuring 5 1/2"
long (straight across), the face is 11/16" square, the peen is 1 1/16"
wide, and this weighs 11 3/4 oz unboxed. Not signed as to the maker.
This is in decent condition and was cleaned. There is some overall
light patina and chisel marks all around the head in front of the eye.
The face is good other than some light dings and a whisker of
mushrooming around the edge. The peen has a small chip out of the
center. The punched eye is good other than a little crusty on the
inside. This ain't pristine but considering the age of the tool, it
sure ain't bad. $16.00
http://oldetoolshop.com/forsale/june/hammer0604a.jpg
http://oldetoolshop.com/forsale/june/hammer0604b.jpg
http://oldetoolshop.com/forsale/june/hammer0604c.jpg
Stanley Rule & Level No 140 Skew Rabbet Block Plane Blade. This weighs
1 3/4 oz unboxed. This is in decent condition and was cleaned. There
is some light pitting on the front. The cutting face on the back has
some frosting. The slots are good. This ain't pristine but it will get
the job done. $28.00
http://oldetoolshop.com/forsale/june/planepart0603a.jpg
http://oldetoolshop.com/forsale/june/planepart0603b.jpg
Early L S Starrett No 36 8 Inch Lock Joint Outside Transfer Caliper.
Measuring 8 3/8" from the top of the joint to the tips and this weighs 6
1/2 oz unboxed. Laroy S. Starrett and Charles P. Fay of Athol, MA were
granted Pat. No. 539,759 on May 21, 1895 for the design of this tool.
This is in reasonably good condition and was not cleaned. There are
some small spots and dots of patina on the arms and the main locking nut
but nothing too bad. There are user initials stamped on the back. The
main joint is good, The fine adjustment is a little stiff but it
works. The transfer screw also works. This ain't perfect but
considering that it's at the least 105 years old, well it sure ain't
bad. $30.00
http://oldetoolshop.com/forsale/june/machinisttool0602a.jpg
http://oldetoolshop.com/forsale/june/machinisttool0602b.jpg
http://oldetoolshop.com/forsale/june/machinisttool0602c.jpg
Greenlee Flat Sweep 1/2 Inch Socket Gouge. Measuring 8 3/4" from the
edge to the end of the socket, the b lade is 6" long, and this weighs 6
oz unboxed. This is in reasonably good condition and was cleaned.
There is a little staining and a few spots of frosting but nothing too
bad. The socket also has some light patina but was never hit. This will
need a handle, I don't have any here that would fit. I gotta say that
these guys sure don't show up very often. $18.00
http://oldetoolshop.com/forsale/may/chisel0511a.jpg
http://oldetoolshop.com/forsale/may/chisel0511b.jpg
Brown & Sharpe No 650 Machinist Center Gage. This weighs 1/4 oz
unboxed. This has the early B & S mark. This is in reasonably good
condition and was cleaned by someone else. There is a little scuffing
and a couple of tiny dots of patina. All the rulings are readable and
the edges are good. This ain't pristine but it wil get the job done.
$15.00
http://oldetoolshop.com/forsale/april/machinisttool0414a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0414b.jpg
Two L S Starrett No 870 Small Hole Gages, There is the A and the C size
and they weigh 3/4 oz unboxed. The model number on the C is faint.
These are in good condition and were not cleaned. There really ain't
much patina at all on these guys. The tips are good and the screws
work. These are handy tools and priced well below what new ones are
selling for. $28.00
http://oldetoolshop.com/forsale/april/machinisttool0418a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0418b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0418c.jpg
L S Starrett No 391 Machinist Center Gage. This weighs 1/2 oz unboxed.
This is in decent condition and was cleaned by someone else. There is
some frosting and a few dots of patina. There is a user mark on the
back. The edges are good and all the markings are readable. This ain't
pristine but it will get the job done. $14.00
http://oldetoolshop.com/forsale/april/machinisttool0401a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0401b.jpg
----------------------------------------------------
"I used to be Snow White, but I drifted."
Mae West
Tony
Olde River Hard Goods
http://www.oldetoolshop.com
TSMusic on Facebook
http://www.facebook.com/tonyseomusic
|