Looks like a decent user. What grit of block did you use? I have all
three, and for plated surfaces, the fine seems to do a decent job, getting
rid of the rust, dulling down the shine a bit, but not removing it.
On Thu, Jul 11, 2019 at 5:55 AM KEVIN FOLEY wrote:
> I posted a while back about Klingspor hard rubber abrasive blocks for
> cleaning up tools. I cleaned something up so I posted before and after
> pics. I was expecting this to have a bare lapped surface, but it was
> plated, the plating now dark or missing. The result isn't shiny bright but
> it's now a good clean user. Inset areas were cleaned with a brass brush
>
> https://kfoley.smugmug.com/Misc/i-dxxcRqk/A
>
> https://kfoley.smugmug.com/Misc/i-k2JzSr4/A
>
>
>
>
--
Kirk Eppler in Half Moon Bay, waiting for my daughter's plane to arrive.
|