On Thu, Mar 15, 2018 at 4:52 PM, Don Schwartz wrote:
>
> The iron that L-N provides for their Cabinetmaker's scraper plane is
> 1/8in. (0.125").I couldn't find any guidance as to sharpening and set-up.
>
> I set the blade depth using a single sheet of paper ( 0.004in thick )
> under the front of the sole, stopping short of the mouth, on a sheet of
> 1/4" glass.
>
Here is LN's directions
https://www.lie-nielsen.com/product/large-scraping-plane
I put the paper only under the very edge of the toe, not the whole front of
the plane
--
Kirk Eppler Really calling it quits this time.
|