> On Jan 11, 2021, at 04:27 , Ed Minch  wrote:
> 
> Adam
> 
> Your total dedication to hand tools is impressive - resawing a board that must
be 12-14" wide is beyond what all but just a few might do.  Did you have someone
on the other end of that saw?  Well done in all aspects.

Thanks, Ed! Good eye on the board size: those were 12" wide x 39" long, and it
took ~1/2 hr for each resaw cut, working steadily. I have yet to try using one
of the GITs on the other end of the frame saw, so it was a solo operation.

I started using chalk marks on the face to note kerf depth where I stopped on
each edge, so I knew when to switch sides and start sawing from the opposite
edge. This helped keep things lined up, I think.

Adam