Today kicked off the Jacktown Summer 2019 Steam Engine Show and Flea 
Market.  The weather is calling for nasty hot, and it was already 75 F 
degrees with 105% humidity at 7:00 AM.  There were some clouds and a 
light breeze that helped a little but the weather kept the dealer count 
down and a lot of the exhibitor spaces out in the show area were empty 
as well.

A couple shots of the flea market area

http://oldetoolshop.com/jointer/bffiles/2019/jacktownsummer2019d1f1.JPG

http://oldetoolshop.com/jointer/bffiles/2019/jacktownsummer2019d1f2.JPG

With the low vendor turnout, pickings weren't great.  I got a Stanley 
Rule & Level No. 921 brace, a 10" Stanley No. 20 try square, a Stanley 
caliper rule, Starrett pin vise, a wood handle pin vise,  a patented 
outside caliper made by Union, a brass glass cutter with the side 
cutting attachment (uncommon), a P S & W 8" wing compass, a cabinet 
makers turnscrew, a W Johnson rivet set, and a Gomph leather tool with a 
funky handle.

http://oldetoolshop.com/jointer/bffiles/2019/jacktownsummer2019d1t1.JPG

There wasn't much in the way of hammers around, the top one is a 
Nantucket style cooper's hoop driver, next is a funky big cross peen 
hammer, next is a regular cross peen, and last is a blacksmith straight 
peen hammer.

http://oldetoolshop.com/jointer/bffiles/2019/jacktownsummer2019d1t2.JPG

Hopefully tomorrow there will be a few more vendors to pick from. But 
who knows

Tony (hot, hot, hot)

-- 

Facebook
https://www.facebook.com/tonyseomusic
Old River Hard Goods
http://oldetoolshop.com/