OldTools Archive
Recent | Bios | FAQ |
266778 | curt seeliger <seeligerc@g...> | 2018‑10‑14 | Re: no power shop build - Brace aned bit and 'hole saws", and sawing PT |
> A 3" hole is actually cutting about 7" of material. a 4" hole is cutting 12 1/2+ inches. It may be a bit late to implement this, but would it not be easier, less irritating if a series of 1/2 or 3/4 inch holes were drilled within the perimeter of the hole, and then a chisel used to knock off the resulting spurs as needed? |
|||
Recent | Bios | FAQ |