Hi Rick,
On 11 Dec, Pier-Rick Lamontagne wrote:
> I've tried to clean with vinegar another saw but it kinda removed the
> disston etching on the blade. So I would like to keep it if possible. And
> in the end, should I polish the saws with a cotton wheel and polish to
> reduce the friction created by the wood?
I think just a simple coat of paste wax applied by hand will do once the
saw is cleaned up. Here's another, classic, non-electrolysis method for
cleaning, from Pete Taran's Vintage Saws website:
http://www.vintagesaws.com/library/saw_clean/saw_clean.html
Scraping of the blade is followed by light sanding, just enough to
remove any lighter rust left behind after scraping.
Regards,
Norm
|