If you can make a measured drawing of it someone like ron hock should be able to
make you one.

-------- Original message --------
From: Tony Blanks
 
Date:05/22/2017  6:20 PM
(GMT-07:00) 
To: oldtools  
Subject:
[OldTools] Source of reprocutters for Preston Reeder? 

Friends,

If anyone knows of a source of reproduction cutters, or cutter blanks 
which will fit an Edw. Preston adjustable reeder, I'd be grateful for 
the info.  Images of the tool and the cutters are here, on Jim Bode's site:

http://www.jimbodetools.com/PRESTON-Beader-with-3-Fences-8-Cutters-and-
Blanks-p45609.html">http://www.jimbodetools.com/PRESTON-Beader-with-3-Fences-8
-Cutters-and-Blanks-p45609.html

or here, in an old Martin Donnelly catalogue: 
https://www.mjdtools.com/ToolItem.php?item=158389&list=487

The distinguishing feature of the cutter blanks is the three slots: a 
longitudinal centre slot to accommodate the cap iron securing screw, and 
the the cross-ways slot towards each end of the cutter to fit the 
adjuster wheel.

Thanks,

Tony B
Hobart, Tasmania


------------------------------------------------------------------------
OldTools is a mailing list catering to the interests of hand tool
aficionados, both collectors and users, to discuss the history, usage,
value, location, availability, collectibility, and restoration of
traditional handtools, especially woodworking tools.

To change your subscription options:
https://oldtools.swingleydev.com/mailman/listinfo/oldtools

To read the FAQ:
https://swingleydev.com/archive/faq.html

OldTools archive: https://swingleydev.com/ot/

OldTools@s...