OldTools Archive
Recent | Bios | FAQ |
262316 | steve hoare <steve0458@h...> | 2017‑05‑19 | Re: Rusty Nickel |
Hi All On the rusty nickel issue I worked for a few months in a plating shop in the 70's during my engineering apprenticeship, there they would degrease the part, copper flash, a few 10ths I think, then nickel plate and finally chrome plate prior to polishing the nickel, the copper is there to aid adhesion of the nickel to certain materials, all a bit vague now though due to the time passed. Hope this helps. Regards Steve, in good ol UK. |
|||
Recent | Bios | FAQ |