Galoots
Despite the densely packed nature of my tool storage, wherein
there are almost no interstitial gaps left to fill, I continue to buy
more tools. What was I thinking?!
I know why. Because they are good tools for cheap. How does
one pass these up? Oh, I can skip a few, but all too often I am
unable to put the tool down once I pick it up.
Here's one that I managed to set back in the pile.
Typical Stanley 45 (overly complicated iron plow plane, Jeff)
missing a lot of parts, including the knob. But it has a depth
stop and one cutter, and a knob is easy to fashion. I had a
hard time putting this one down.
http://galootcentral.com/components/cpgalbums/userpics/10074/IMG_201704
02_101624.jpg">http://galootcentral.com/components/cpgalbums/userpics/10074/IMG_
20170402_101624.jpg
But there were some things that I could not resist.
Why do I need yet another bead plane? Especially
a 1/8 fully boxed slip bead? Which I already have one...
Because it was cheap and it is straight and sharp and
when I got it home I set the iron and cut a nice bead
with the plane as-is with no fettling at all. It is in great
user condition, and for something that is like 100 years
old that is a Good Thing.
And another auger bit? I need more bits like I need a
hole in my head. Well, when I looked through
about the 20th bin of bits I spotted a Cook's Patent
in there - and the bin said "$2 each". This one is a #16
(1 inch auger Jeff) which is a great size for making stools
and camp furniture. Needs sharpening of course, but I
can sharpen auger bits.
The auger bit handle is for making shrink pots. A brace
will work, and the bigger the hole you bore, the less knife
work is needed. I find it tough to crank the #24 auger bit
with a brace, but if it was a Tee handled auger it would
be much easier. Thus the handle...
A couple of inexpensive repro catalogues. How can you
say no to these? Once I read them, they go into the
Galootaclaus pile.
I also snagged a really nice file. It's a Made in Canada
Nicholson flat bastard. Clean and sharp, ready to hog
off some stock, be it metal or wood. Never pass up a
good file at a good price.
http://galootcentral.com/components/cpgalbums/userpics/10074/IMG_201704
02_174928.jpg">http://galootcentral.com/components/cpgalbums/userpics/10074/IMG_
20170402_174928.jpg
All in all, it was a good weekend for tool hunting.
Darrell
And the bonus non-tool item in there is a filter rod for the
vacuum coffee maker I got from my grandma's kitchen.
In case you didn't recognize it :^)
--
Darrell LaRue
Oakville ON
Wood Hoarder, Blade Sharpener, and Occasional Tool User
|