The following shows the message you requested. To get back to the list of browse results, click the back button on your browser.
If you are thinking of subscribing to this list, please consult the OldTools FAQ.
| 233458 | Phil Koontz <phil.koontz@g...> | Oct-05-2012 | Bottom feeder request |
Hi all-- I don't post much, basically for lack of anything appropriate to add to the conversation. This year, the big local project has been building a house for some friends. They moved into it this week, so the fruits of our logging trip last spring have already come to hand. And it went really well. So well in fact, that I and the rest of the local colony of wood butchers are already looking forward to next year's trip. And that's even though we still have the entire winter to get through. Oddly, I'm here today looking for hammers; cheap claw hammers in particular. The reason is that I bought a few nice ones this year, and I don't want them to end up at the bottom of the Yukon. Some of you may recall that one of our annual rituals with logging on the river is that we always, ALWAYS toss in a few hammers. Usually it's just a simple accident--someone will be on the raft nailing the logs together with strapping and the hammer just disappears. Last season, our young newby tossed one hammer in on the downswing, and the next one seconds later, on the backswing. Those were the last two of a good score I made at a local yard sale years ago, when I bought four or five junkers for a buck each. After the cheapies were gone, we had a choice of letting good tools go out on the raft, or of using a plastic mallet for driving 16d nails. There was one memorable year when we didn't lose any tools on the job, but the Karma payback was so bad that we decided to toss a few tools in the river as a ritual sacrifice for our deliverance during an incident that involved Big Eddie, a windy day, and a disintegrating log raft. For those who tuned in recently, the story is in the archives at http://swingleydev.com/archive/get.php?message_id=192590&submit_thread=1#message For next year, I bought a recovery magnet (it might help), but the local supply of junk claw hammers seems to have finally been depleted. It occurred to me that the OT list is a pretty good place to look for user tools, bottom feeder tool (get it?), and for a few people who might actually prefer to toss some of their crappy tools in the Yukon. If you are in the last group, we have a common interest. What I would prefer is something with at least part of both claws, a useable handle, and moderate weight, say 12 to 20 ounces. There's no hurry on this issue, and it's probably worth looking around for some way to save on postage, so if anybody has a collection of worthless junk to dispose of, so much the better. I see that I don't have any recent pics of the house project. There are a few in-progress shots at http://pdknz.livejournal.com/144498.html As it turns out, the camera is in town with SWMBO, but I'll get some more pics posted after she gets back. Galootie fieatures--we cut all the trees, floated them down the river, milled them, and built the entire house since June. It's almost entirely local wood, the only exception being some plywood in the floor. It's insulated for our winters (circa -50F), heated with a wood stove, and built entirely by amateur labor. Thanks and hi from down river, PK ------------------------------------------------------------------------ | |||
| 233459 | Micah Salb <msalb@l...> | Oct-05-2012 | RE: Bottom feeder request |
--===============5937180250863129354=Content-Language: en-US Content- Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 DQoNCi0tLS0tT3JpZ2luYWwgTWVzc2FnZS0tLS0tDQpGcm9tOiBvbGR0b29scy1ib3VuY2V- zQHJ1 Y2t1cy5sYXcuY29ybmVsbC5lZHUgW21haWx0bzpvbGR0b29scy1ib3VuY2VzQHJ1Y- 2t1cy5sYXcu Y29ybmVsbC5lZHVdIE9uIEJlaGFsZiBPZiBQaGlsIEtvb250eg0KU2VudDo- gRnJpZGF5LCBPY3Rv YmVyIDA1LCAyMDEyIDU6MzYgUE0NClRvOiBvbGR0b29sc0BydWNrd- XMubGF3LmNvcm5lbGwuZWR1 DQpTdWJqZWN0OiBbT2xkVG9vbHNdIEJvdHRvbSBmZWVkZXI- gcmVxdWVzdA0KDQpIaSBhbGwtLQ0K DQo8c25pcD4NCg0KLi4uYm90dG9tIGZlZWRlciB0b- 29scyAoZ2V0IGl0PykuLi4uDQoNCjxzbmlw Pg0KDQpPSywgdGhpcyBjcm9zc2VzIHRoZSBsaW5lLg0KDQoNCi1NUw0KDQo --===============5937180250863129354=Content- Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer- Encoding: 7bit Content-Disposition: inline ------------------------------------------------------------------------ | |||
| 233468 | scott grandstaff <scottg@s...> | Oct-06-2012 | Re: Bottom feeder request |
Hey Phil
Well you know I love ya. Always encourage your adventures and would
want to support them.
But rounding up, boxing and mailing hammers from the low 48
( --My-- shop!?!?! ) so you can intentionally throw them in the river?
Dude, how about a Harbor Freight coupon?
I don't traffic in disposable tools.
How about a sack of rocks you can throw (ancient tool) and a lanyard
to lash your hammer to any likely wrist.
yours Scott
--
*******************************
Scott Grandstaff
Box 409 Happy Camp, Ca 96039
scottg@s...
http://www.snowcrest.net/kitty/sgrandstaff/
http://www.snowcrest.net/kitty/hpages/index.html
------------------------------------------------------------------------
| |||
| 233471 | "Dave Nighswander" <wishingstarf | Oct-06-2012 | Re: Bottom feeder request |
Might I suggest a couple wooden mallets? Snip -----Original Message----- From: scott grandstaff How about a sack of rocks you can throw (ancient tool) and a lanyard to lash your hammer to any likely wrist. yours Scott Unsnip ------------------------------------------------------------------------ | |||
| 233472 | "Andy Baughn" <badandy@m...> | Oct-06-2012 | RE: Bottom feeder request |
I once had some wrenches that ended up in my workbench years ago. The only good thing about them was that they were bendable and could be made into crows foot wrenches easily. Wouldn't be a big loss to lose those in the river. Or those 'tools' from the Dollar Tree. Bad Andy ------------------------------------------------------------------------ | |||
| 233478 | scott grandstaff <scottg@s...> | Oct-06-2012 | Re: Bottom feeder request |
Phil
I think you just need to "get to know" your spirits.
I lived with a ghost for 7 years. Nobody in the world could have
convinced me ghosts could be real. Until I met one.
Her name was Sarah. I loved her. She was wonderful! Impish, funny,
goofy even.
I began to know her long before I knew who she was. I began to like
her too. She would brush past your face enough to no kidding feel it
right now, if you ignored her for too long.
After some years I found a little protected grave long overgrown in
the brush, and began to find out who she really had been. I already knew
who she was.
Sarah didn't want "stuff". My stuff did her no good at all.
She would think you totally butt pitiful crazy if you sacrificed a
hammer to her.
Look at you like you done lost your mind, boy!!
You think her a fool? Did you?
She'd kick your ass you treat her like a fool. And she was the girl
with the boots,..... you screw around too much.
She wanted the attention. She wanted the acceptance. She wanted to
feel and even be included.
Not kiss-up and phony, more like when the crap is on the griddle and
you feel something against your back? And its her back looking out for
you the other way? And you just relax into the security of someone
looking out for you, and you for her??
Things like this.
If you want your spirits to watch and help you, bribery is for shit.
Give them their due. Give them respect. Give them attention. Make them
know you know that they are there, and you are counting on them. Let
them know you are looking out for their interests too.
Look forward to them instead of cowering, which nobody likes.
Thank them and bid a hearty goodbye at the end.
Then, you got friends you can count on.
yours Scott
--
*******************************
Scott Grandstaff
Box 409 Happy Camp, Ca 96039
scottg@s...
http://www.snowcrest.net/kitty/sgrandstaff/
http://www.snowcrest.net/kitty/hpages/index.html
------------------------------------------------------------------------
| |||
| 233479 | WesG <wesg@g...> | Oct-06-2012 | Re: Bottom feeder request |
Scott whatever you're having; you should be sharing the recipe with the rest of us. Hehehehe. Wes On Oct 6, 2012, at 5:02 PM, scott grandstaff <scottg@s...> wrote: > I lived with a ghost for 7 years. Nobody in the world could have > convinced me ghosts could be real. Until I met one. ------------------------------------------------------------------------ | |||
| 233491 | scott grandstaff <scottg@s...> | Oct-06-2012 | Re: Bottom feeder request |
Hey Wes
Its not a what, its a where.
18 miles downriver from Camp. Its an old place called Beck's Ranch.
Becks were a large family here.
Its 40 acres with riverfront for 1/4 mile. A large rich orchard of
apples, pears and quince, and a very large, very cold bubbling spring
that comes direct from the snow capped peaks. It never runs dry, even in
the worst drought.
It gushes out from under a high rock schist, uphill from the
property, so you have free gravity water pressure.
Yes, you can bathe, and wash your car, and water your flowers in water
others can't pay enough money to get.
There is an old cabin in as bad a shape now, as when I first saw it 35
years ago. It gets like this when no one lives there long enough.
But the bones are still there and you can have it cozy again. I did
it, you can too. Its nestled in the myrtle trees so you never suffer the
worst summer heat.
There is no electricity that far out though, and no phone.
But there are a few neighbors within several miles, and they are good
people you will be glad to know.
And one playful, wonderful ghost.
Don't take my word for it. Go and meet her for yourself.
You just move in, and be yourself. She'll come round. She knows who's
worth talking to. And you'll do.
Sarah Goodwin. Tell her I sent you.
yours Scott
On 10/6/2012 3:12 PM, WesG wrote:
> Scott whatever you're having; you should be sharing the recipe with the rest
of us.
> Hehehehe.
> Wes
>
>
> On Oct 6, 2012, at 5:02 PM, scott grandstaff <scottg@s...> wrote:
>
>
>> I lived with a ghost for 7 years. Nobody in the world could have convinced me
ghosts could be real. Until I met one.
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2221 / Virus Database: 2441/5312 - Release Date: 10/05/12
>
>
>
--
*******************************
Scott Grandstaff
Box 409 Happy Camp, Ca 96039
scottg@s...
http://www.snowcrest.net/kitty/sgrandstaff/
http://www.snowcrest.net/kitty/hpages/index.html
------------------------------------------------------------------------
| |||
| 233571 | Ed Bell <neanderman@f...> | Oct-09-2012 | Re: Bottom feeder request |
On 10/5/2012 5:45 PM, Micah Salb wrote: > -----Original Message----- > From: oldtools-bounces@r... [mailto:oldtools-bounces@r...] On Behalf Of Phil Koontz > Sent: Friday, October 05, 2012 5:36 PM > To: oldtools@r... > Subject: [OldTools] Bottom feeder request > > Hi all-- > > <snip> > > ...bottom feeder tools (get it?).... > > <snip> > > OK, this crosses the line. > Line? There's a line? Oh dear... Ed ------------------------------------------------------------------------ | |||
Browse from Here (233571)
back (233570)
up (browse index)
forward (233572)
New Search
New Advanced Search
New Browse Form
Browse Recent Messages